Question about 2005 Toyota Corolla
Removing blower motor
Your blower motor is placed under the dashboard...you need to remove the lower panels on the passenger side to access the motor. easy...good luck.
Posted on Jun 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: How do I remove the
ffirst remove all screws that are holding it on approx 10, most are hidden by small round circles of plastic the same colour as the panel next you to be firm and pop it off from the door carefully there is about 10 of these clips which "pop" off then carefully lift upwards slighty unplug your electric window switch by pushing the tab on the plug itll come off. that's your door panel off. be carefull not to bump and of the metal wires you see running inside the door as these are to do with you door lock. to fix window gently pull down plastic moisture sheet on door first try another switch or give your switch a good clean, you can disasssemble it with a small screwdriver carefully, if still no difference replace your electric window motor which is bolted to the door in 3 places with 10mm bolts and is bolted to the window, unsure of what it is follow the wiring from the electric switch you unplugged will lead you to the electric motor, have fun
Posted on Sep 03, 2008
SOURCE: Heater Blower Motor
Remove the glovebox door, and the under dash cover/trim panel.
Look behind where the glove box was, you will see the heater box
At the bottom of this box, there is a round plate with a wiring connector and 3 screws holding this plate to the heater box.
This plate is the bottom of the heater fan assembly; remove the connector, and the 3 screws. The fan motor will drop staright down. Real easy to do.
Posted on Oct 21, 2008
SOURCE: heater blower noisy
there should not be no more then three screws and unplug and the blower is out and you say its noisy check for leaves and to make sure the blower is not hitting anything before you go to buy another one.
Posted on Feb 14, 2009
Under normal circumstances, the drum should slide right off once the wheel is removed.
If you have built up rust holding it on, there are two threaded holes near the center of the drum to aid in removal.
Insert two 12mm bolts into the holes and, while adding plenty of lubricant, turn the bolts in even amounts until they push the drum off.
Be sure to keep them lubed, as they will strip out easily if not.
If you have aftermarket drums without the holes or the screwholes are stripped out, smacking the face of the drum with a dead blow hammer will help free it up, but takes much longer for success.
Posted on Oct 17, 2009
if youre sure that its the blower motor.......then HANG ON......cuz HERE WE GO!!!! k....open the passenger front door....get on your knees.....and look BELOOOWW the glovebox...there should be a black plastic cover...more than likely...that ya have to remove....after that....you can see your blower motor...should have three screws...maybe one more....and it will be released from the evap box....you then have an electrical pigtail connector you have to release and VIOLA!!!!!! there's your blower motor in your hands......install is opposite of reverse.....yeah I know that your knees hurt right now.....but...HOPE I HELPED!!!!!
Posted on Nov 14, 2009
Tips for a great answer:
Jan 28, 2017 | 2005 Toyota Corolla
Apr 18, 2012 | 2005 Toyota Land Cruiser
Jul 16, 2011 | Toyota Corolla Cars & Trucks
Sep 12, 2010 | 2005 Toyota Corolla
Aug 15, 2010 | 2005 Toyota Corolla
Jun 04, 2009 | 2000 Toyota RAV4
Jan 15, 2009 | 2003 Toyota Corolla
Jan 11, 2009 | 2005 Toyota Corolla
134 people viewed this question
Usually answered in minutes!