Question about 2000 Mitsubishi Lancer

Open Question

Lancer ck2 automatic gear not shifting & N light blinking while driving

I have lancer ck2 done 2 oil seal replacements due to oil leak after some times gears not shifting stuck on 3rd gear neutral indicator blink with drive

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: my 3000gt is stuck in 3rd gear why? this is a automatic

Your transmissions need to be service (fluid and filter change) and possibly a TCU replacement. Do NOT go to a dealer. Instead, look on ebay or craigslist for part outs. Transmission control units can be expensive but that is most likely the problem if you already changed ur fluid.

Posted on Jun 25, 2009

  • 750 Answers

SOURCE: GEAR NEUTRAL LIGHT BLINKING WHILE THE CAR IS ON DRIVE

faulty contacts in neutral switch replace with new unit

Posted on Oct 08, 2009

  • 1986 Answers

SOURCE: Gear Neutral light blinking while the gear is on

I believe it means that your transmission fluid is either getting too hot, or there's not enough fluid

Posted on Oct 08, 2009

  • 17 Answers

SOURCE: i have a mitsubishi galant vr4 1995 made,...i have

Your transmission has gone in to a limp home mode or fail safe mode, trans computer has locked third gear to prevent any more damage. Needs a diagnostic scan to confirm fault code could disconnect battery for 10 mins and drive to see if problem reaccures. Trans computer common to fail.

Posted on Apr 20, 2010

  • 3072 Answers

SOURCE: it wont go in drive

Most likely a transmission solenoid. Good luck and hope this helps.

Posted on Apr 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi lancer ck2 engine knock is coming when engine heat comes to normal level


I would need to hear this knock to try and guess what it is. sorry.

Sep 23, 2016 | 2000 Mitsubishi Lancer

1 Answer

I have a ck2 lancer what causes neutral light to blink while on drive


Usually when they blink it means there is a transmission problem. You might not feel the problem. Have the codes read.

Jun 26, 2016 | Cars & Trucks

1 Answer

I have a ck2 lancer a 4g13 carberata model I have transmission problem it has stick on gear 3 an neutral light is blinking I have changed transmission an brain box an nothing has fix


Dang, spend all that time and money. When you have a bad wire somewhere. Check the wiring from the transmission to the brain box. I would bet you'll find it.

Jun 26, 2016 | Cars & Trucks

1 Answer

Lancer Ck2 N light indicator blinks while on drive when get to stuck on gear3


the blinking of a nuetral light usually means overheating of the trans fluid. it says to pull over an let it ( the fluid ) cool down..... hope that helps

Oct 16, 2014 | 2002 Mitsubishi Lancer

1 Answer

Lancer Ck2 N light indicator blinks while on drive ?


check tests in the FSM book yet?
when you get a tranny code, there are tests to do.
to find out if.
the voltage to the solenoid are wrong.
the coil open or the valve dead.
or if the tranny is slipping and fooling the TCM.


31 LR solenoid opened

read the in the FSM, it shows you what to test.

on some A/t you can force it into manual mode and driver and shift manually (I have a test box, i made that does that to all cars)
but you can do that and check for tranny slip and see that all solenoid infact work and can hold a gear.

keep in mind the TCM is stupid as a brick
it cant tell of tranny slips , if the solenoid is dead 6 ways from sunday
in many cases, only that the RPM in the tail shaft is wrong.
some can check the solenoid voltage. the FSM tells you if that is true or not, so not looking and reading that first makes tests harder.

May 09, 2014 | 2000 Mitsubishi Lancer

1 Answer

Ck2 lancer


is it a automatic or stick ?

Jun 15, 2013 | Cars & Trucks

1 Answer

Shifting solenoids on 2002 Lancer.


For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 08, 2012 | 2002 Mitsubishi Lancer

2 Answers

Mazda 626 'HOLD' light after gear box oil seal was replaced


I have the same problem with my car I think its the torque converter clutch but you should visit a diagonestic machine just to find out

Dec 06, 2008 | 1998 Mazda 626

3 Answers

Automatic transmission problem


I have 1998 Maruti Esteem Automatic gear car - It works smoothly for 10-15 Kms and afterwards gear not shifting (may be getting heated inside somewhere?) - Recently I changed gear oil also. Any solution???

Jul 01, 2008 | 1997 Suzuki Esteem

Not finding what you are looking for?
2000 Mitsubishi Lancer Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...