Question about 2002 Ford F150 Regular Cab

Open Question

Were the brake ligth swicth relay location onford f150

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Brake light dont work, change bulbs, fuse, bake switch, and has power still dont work


You have a failed brake lamp relay,this is located at the back right hand in the trunk at the quater panel.

Mar 12, 2012 | 2003 Honda Civic

1 Answer

Replace ligth swicth dimmer swicth brakes and singal litghs work no head ligths


Sounds like your turn signal switch is bad!! Multi-functioning switch it controls your head lights two? Unless you have a push button switch!

Sep 04, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

I RECENTLY HAD A STEERING WHEEL IN MY FORD-F150 REPLACED, NOW MY BRAKE LIGHTS , CRUISE CONTROL, AND HORN ARE NOT WORKING.WHAT COULD BE THE PROBLEM , OTHER THAN MY CHOICE OF MECHANICS ?


The air bag ligth is on ? because if it is on you may have a problem with the clockspring that is located behind the steering wheel and it's connected with the steering wheel air bag

Jan 23, 2011 | 2004 Ford F150

1 Answer

No turn signals and lose brake lights when turn signal is used.


you need to replace the multifuction swicth (turn singnal swicth) that controll all of that stuff i have replaced many of them for that problem hope that this helps you

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

Brake lights and turn signals don't work


check for fuses,stop ligth switch in brake pedal and multifuncion switch wich is the one in the steering colum,depresing pedal power go up to multifuntion switch before go rear lights.GL

Nov 25, 2009 | 1996 Ford F150 Regular Cab

3 Answers

All lights work, except the brake /tail lights,the L.E.D. brake light on top works


The third break lights are LED and the circuit board may have gone bad or the solder may have gone bad. The circuit board is built in the third brake light and is a seal unit. You may have to replace the unit, there is a relay for the third brake light and that is located on the glove box behind the panel that say's relays. There are three relays in there, the center is for the fuel pump and the two out side are for the A/C and third brake light. Just swap them around and see if the brake lights come on. Good luck and keep me posted. 

Jun 25, 2009 | 2001 Chevrolet Blazer

1 Answer

Brake lights


you need to replace the brake light switch ,,its located under the brake pedal,,you turn it to remove

May 01, 2009 | 1989 Peugeot 405

1 Answer

MY BRAKES LIGTHS ARE NOT WORKING.......


if ALLyoure brake lights are not working i would definately check the brake swich usually located on the brake pedal itself up under the lower dash area

Apr 25, 2009 | 2000 Ford Expedition

1 Answer

How to get at brake light swicth 94 volvo


The brake light actual sitch is down by pedal, but if you dont have any brake lights at all it is most likely the relay, this is located behind ashtray and fuse box cover, it is big red relay,marked with letter A. change it.

Jan 19, 2009 | 1994 Volvo 940

2 Answers

My brake ligths wont shut off.


You may have a shorted turn signal switch the only other reason is a shorted wire in the main harness, have you done anything to the car that might account for some damage to the rear harness, it runs along the under side of the door sill plate

Jul 31, 2008 | 1996 Nissan Sentra

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...