Question about 2006 Toyota RAV4

1 Answer

When i put my Rav-4 on Drive and only Drive with my foot on the brake it vibrates

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

Check engine mounts or transmission mounts also check drive shaft mounts. Failed mounts will create vibrations at idle and or in general.

Some engines that have the hydraulic serpentine belt tensioner that can bounce around and make a nasty vibration as well, it makes it seem like engine mounts.

Posted on Jun 14, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: toyota rav 4

I work for Toyota, and I will be glad to provide you with the actual answer:

The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.

There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Toyota Ed


Posted on Oct 17, 2008

  • 65 Answers

SOURCE: toyota rav 4

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 30, 2008

tragedy lok
  • 266 Answers

SOURCE: 2000 Toyota Corolla Vibrates

try giving a good tune up gas filter cap, rotor,wires,plugs,should feel a dramatic change

Posted on Jun 25, 2009

  • 7 Answers

SOURCE: how do you put rav 4 into 4 wheel drive

I have a 2006 rav4....there is a button to the left side of the radio labeled 4WD push it and 4WD light comes on on dash. It is electronic. Bad thing is that it automatically turns off the 4WD when the car reaches about 25 MPH....This means that if you want to sling mud while going through a puddle at 10MPH while reading 40MPH on speedometer...you are out of luck.

Posted on Mar 27, 2010

  • 11800 Answers

SOURCE: vibration when foot is on

The brake disks are warped and must be replaced.

Posted on Sep 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I stop at a stoplight and put my foot on the brake while the Car is in drive the car vibrates but when I put it in neutralit vibrates less


There are several reasons this could be happening.could be engine or transmission mounts are bad,could need a tune up possible idle control motor,how does the car run going down the road.

Oct 11, 2015 | 2005 Hyundai Elantra GLS

1 Answer

How to recycle cmputer after reseting CEL


1.let car sit overnight. 2. Start engine, put A/C on high, let it idle for 20-25 minutes, 2, then drive car uninterrupted for 60mph for 10 minutes, 3. slow down to 25 mph for 4 minutes, come to a complete stop with foot on brake let it idle for 2 minutes, 4. drive again at 30 mph for 8 minutes, come to a complete stop let it idle with foot on brake for 3 minutes. 4. Drive at 40 mph (turn off overdrive) for 6 minutes. 5. Drive at 20mph for 3 minutes at a time, each time coming to a complete stop with foot on brake for 2 minutes. Do this 4 times. Let the car cool overnight and repeat entire process. Then check status of systems with a code scanner.

Apr 15, 2014 | Toyota Camry Cars & Trucks

1 Answer

Drive belt tensioner vibration


Your power steering pump may be locking up or the a.c.compressor.

Aug 22, 2012 | Cars & Trucks

1 Answer

No check engine lights. It only occurs when in drive and foot is on the brakes.


I'm guessing that the symptoms would be vibration in the vehicle, since this will happen when it's in drive with the foot on the brake. Check your motor mounts and transmission mounts.

Sep 29, 2010 | 2006 GMC Envoy Xl

1 Answer

When i started my 2006 rav 4 this morning these lights came on and are still on, brake light,4wd light, ABS, VSC LIGHT?


If you had your foot on the brake while starting brake light could come on. If a catalytic convertor does not pass at startup (possibly ox sensor or whole convertor) then the computor turns 4wd vsc and check engine light on. note the six cylinder has three catalytic convertors and the four cylinder has two. Very expensive if convertor(s)

Mar 07, 2010 | 2006 Toyota RAV4

2 Answers

2000 Toyota Corolla Vibrates


try giving a good tune up gas filter cap, rotor,wires,plugs,should feel a dramatic change

Jun 25, 2009 | 2000 Toyota Corolla

1 Answer

My 2003 rav 4 vibrates on rear end while driving ,i hav a 2litre turbo diesel as i move up the gears it vibrates all through the car when u get to a steady speed it stops vibrateing ,even when u let the...


I would suggest having your universal joints checked out , sounds like a bad joint or bearing somewhere in the rear end, if you can get your speed up to about 50, put your rav in neutral and let it coast if it stops vibrating, it most likely is your problem

Mar 24, 2009 | 2003 Toyota RAV4

1 Answer

Toyota rav 4


I work for Toyota, and I will be glad to provide you with the actual answer:

The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.

There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Toyota Ed


Oct 17, 2008 | 2002 Toyota RAV4

1 Answer

2000 mitsubishi galant 4 cyl.


check your motor mounts by holding your foot on the brakes, set the E-brake and have someone watch the motor as you shift into reverse and touch the gas a little bit do the same in drive if the motor moves allot back and forth you need new motor and possibly transmission mounts good luck and please rate -jeff

Aug 30, 2008 | 2000 Mitsubishi Galant

Not finding what you are looking for?
2006 Toyota RAV4 Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...