Question about 2008 Nissan Navara 2.5

Open Question

Install transmission cooler - 2008 Nissan Navara 2.5

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the vehicle checked my honda CRV. It does not have external transmission cooler, the radiator does the cooling. How do I stop transmission overheating, without installing externer cooler?


replacing the radiator might help because if the cores are partially blocked the cooler cannot do the job
take it to an accredited transmission service center and have the bans and clutch packs adjusted
check that the transmission is not up past the full line as that will also over heat a transmission
it is advisable to consider the external cooler as it makes the transmission run probably 100 degrees cooler than a radiator cooler
for example with a radiator cooler the oil is at engine operating temperature ( 95-100 C) but with external cooler , the ambient temp rarely gets over 45 c so that is cooling the oil by 40 c even before the transmission starts to work
it also allows the radiator to be more efficient for the engine

May 27, 2017 | Honda Cars & Trucks

1 Answer

SE. How do I remove transmission oil cooler line?


How To Install Replace Transmission Cooler Lines 2001-06 ...

? 5:45
https://www.youtube.com/watch?v=SFEXmxxBMK8
Oct 31, 2013 - Uploaded by 1A Auto Parts
How To Install Replace Transmission Cooler Lines 2001-06 ... In this video, 1A Auto shows you how to remove, replace and install leaking or broken Transmission Cooler ... How To Install ReplaceDo a Front Brake Job 2001-06 Chrysler ... 2003 Dodge Ram 3500 trans cooler replacement how to 11-24-12 ...

Search DODGE MAGNUM Cooling > Transmission Oil ...

www.factorychryslerparts.com > ... > Transmission Oil Cooler, and Lines
DODGE MAGNUM Cooling > Transmission Oil Cooler, and Lines. ... Please let us know what we can do to achieve this goal. ... Our inventory covers the following years of MAGNUM: 2005, 2006, 2007, 2008, ... Click X to remove the keyword.

Leaking Transmission Cooler Line Replacment Recommendations ...

www.dodgeintrepid.net > ... > General Discussion (First Generation)

Dec 12, 2015 | 2006 Dodge Magnum

1 Answer

Is transmission cooler factory installed or an aftermarket purchase?


if it has a factory tow package usually it already has a trans cooler installed it will be located in front of the radiator/ a/c condenser , if not there not that difficult to install

Jul 07, 2014 | 1999 Jeep Cherokee 4WD

1 Answer

Transmission is leaking from my 2008 ford escape. The VIN number does show that it was manufactured in Kansas, but because i am in Canada the recall did not include canadian owners.


What do you need? I would cantact Ford of Canada in back of owner manual with letter, not phone, if issue is the same. TEXT:

In some of the affected vehicles, the transmission fluid cooler may develop a crack in the tube below the right hand (RH) mounting bracket from thermal and vibration fatigue. This may lead to a small transmission fluid leak and possible rough / harsh shifts. Dealers are to inspect the transmission fluid cooler for a grommet and possible fluid leak below the RH mounting bracket. Based on the results of the inspection, dealers will perform one of the following service

actions:

INSPECTION

1. Using a suitable light, look through the radiator grille and inspect the transmission fluid cooler mounting bracket for a grommet behind the mounting bolt. See Figure 1 and Figure 2.


Inspection Result Service Action

Grommet present - No further action required


Grommet not present and transmission fluid cooler not leaking - Install transmission fluid cooler mounting bracket


Grommet not present and transmission fluid cooler leaking - Install new transmission fluid cooler.

-----------------------------------------------------------

In some of the affected vehicles, the transmission fluid cooler may develop a crack in the tube below the right hand (RH) mounting bracket from thermal and vibration fatigue. This may lead to a small transmission fluid leak and possible rough / harsh shifts.

Dealers are to inspect the transmission fluid cooler for a grommet and possible fluid leak below the RH mounting bracket. Based on the results of the inspection, dealers will perform one of the following service

actions:

INSPECTION

1. Using a suitable light, look through the radiator grille and inspect the transmission fluid cooler mounting

bracket for a grommet behind the mounting bolt. See Figure 1 and Figure 2.


Inspection Result Service Action

Grommet present No further action required

Grommet not present and transmission Install transmission fluid cooler mounting bracket

fluid cooler not leaking

Grommet not present and transmission Install new transmission fluid cooler
fluid

May 24, 2011 | Ford Escape Cars & Trucks

1 Answer

How to get to starter on 2003 traikblazer


Removal & Installation 4.2L Engine To Remove:
  1. Disconnect the negative battery cable from the battery.
  2. Disconnect the brake booster hoses from the engine. Starter gm-02-42-1398.gif

  3. Remove the positive battery cable and s-terminal lead from the starter.
  4. Remove the starter from the engine.
To Install:
  1. Install the starter to the engine. Tighten the nut and bolt to 37 ft-lb (50 Nm).
  2. Install the positive battery cable and s-terminal to the starter. Tighten the battery cable nut to 80 in-lb (9 Nm). Tighten the s-terminal nut to 20 in-lb (2.3 Nm).
  3. Connect the vacuum brake booster hose to the engine.
  4. Connect the negative battery cable to the battery.
5.3L & 6.0L Engines To Remove:
  1. Disconnect the negative battery cable from the battery.
  2. Raise and support the vehicle.
  3. Remove the rear steering gear crossmember from the frame. Starter gm-02-53-1399.gif

  4. Detach the wire harness from the transmission oil cooler line bracket.
  5. Detach the transmission oil cooler line bracket from the engine.
  6. Remove the right transmission cover bolt from the transmission cover.
  7. Detach the starter from the engine.
  8. Slide the starter forward and remove the transmission cover.
  9. Remove the heat shield from the starter.
  10. Position the starter so that it can pass between the engine oil pan and transmission oil cooler lines.
  11. Detach the starter lead and battery positive cable from the starter.
  12. Remove the starter from the vehicle.
To Install:
  1. Place the starter between the engine oil pan and transmission oil cooler lines.
  2. Attach the battery positive cable to the starter and starter lead. Torque the battery positive cable nut to 80 in-lb (9 Nm). Torque the starter lead nut to 30 in-lb (3.4 Nm).
  3. Install the heat shield to the starter.
  4. Attach the starter from the engine. Torque the bolts to 37 ft-lb (50 Nm).
  5. Install the right transmission cover bolt into the transmission cover. Torque the bolt to 80 in-lb (9 Nm).
  6. Attach the transmission oil cooler line bracket to the engine. Torque the bolt to 80 in-lb (9 Nm).
  7. Attach the wire harness to the transmission oil cooler line bracket.
  8. Install the rear steering gear crossmember onto the frame.
  9. Lower the vehicle.
  10. Connect the negative battery cable to the battery.
prev.gif next.gif

Aug 19, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

Should I install a trans cooler


There is a reason they install a transmission cooler in
a vehicle when you order the towing pkg. Cooler is
better. A universal trans.cooling system is not that
expensive and fairly easy to install. And it's worth it's
weight in gold if you can squeeze an extra 10 to 20,000mi out of a transmission, before you go the long buck for a rebuilt. Hope this helps.

Mar 21, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

How to remove a radiator from a ford taurus


Disconnect battery ground cable. Remove battery. Remove battery tray. Remove clip retaining contant control relay module and position module aside. Remove radiator cap. Raise vehicle front end as high as possible. Remove radiator splash shield. Drain radiator. Remove the radiator mounting bracket assembly. Remove lower radiator hose. Partially lower vehicle. Remove upper radiator hose. Remove radiator overflow hose. Remove upper A/C condenser core retaining bolts. Remove upper transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Raise vehicle. Remove lower transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Remove transmission oil cooler bracket and position transmission oil cooler aside. Remove lower A/C condenser core bolts and position A/C condenser core aside(be careful not to loosen the AC condenser lines. Remove radiator support bracket. Remove radiator out through the bottom of the vehicle.
Installation
Position radiator. Position radiator support bracket and tighten nuts. Position A/C condenser core and tighten lower A/C condenser core bolts. Position transmission oil cooler tube and install transmission oil cooler tube bracket. Install lower transmission oil cooler tube. Install lower transmission oil cooler tube clips. Install lower radiator hose. Install radiator mounting bracket assembly. Tighten bolts. Install radiator splash shield. Lower vehicle. Install upper tranmission oil cooler tube. Install upper transmission oil cooler tube clips. Install upper A/C condenser core retaining bolts. Tighten bolts. Install radiator overflow hose and tighten clamps securely. Install upper radiator hose. Position constant control relay module and clip securely. Install battery tray. Install battery. Connect battery ground cable. Fill and bleed cooling system. Start engine and inspect for leaks.

Nov 25, 2009 | 1998 Ford Taurus

1 Answer

Install a radiator on a 1993 Chevrolet Caprice without oil cooler


you install radiator but did not install transmission cooler? Im not quiet understand the your questions? correct me if im wrong, The caprice has engine cooling systems which is the radiator and also a transmission cooler which cool the transmission. make sure you also hook up the transmission cooler, very important which help cool your tranny so it wont over heat.

Nov 06, 2009 | 1993 Chevrolet Caprice

1 Answer

Transmission leak


Find out if your car has a transmission cooler. If it does this hose would be a transmission cooler line. (wouldnt be covered in a manual). Transmission cooler would not be installed by the factory (after market).

Apr 02, 2009 | 1991 Buick Riviera

2 Answers

I have a leak of my tranny fluid and I think its from my transmission cooling lines,radiator or the cooler. Should I install an auxilary cooler for the transmission ?


Most cooler manufactures and automobile manufactures information we have read, recommends installing the coolers In-Series with the factory radiator cooler for maxium cooling efficiency.

If you must bypass the radiator because the cooler tube is leaking or for other reasons, be sure to increase the size cooler you install by 1 to 2 sizes.

It is not necessary but will help in the long run. Expecially if you are towing or do alot of driving.

Jan 17, 2009 | Ford Club Cars & Trucks

Not finding what you are looking for?
2008 Nissan Navara 2.5 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...