Question about 2006 Chevrolet Monte Carlo

1 Answer

2006 Monte Carlo had bad actuator, now aux power fuses blown

I had a clicking in my front passenger dash that the dealer fixed saying it was the actuator, which from a couple other posts I believe to be correct. Simultaneously, both of my Aux power outlets stopped working (I assume fuse). I had read a post on a different site saying that this becomes a constant cycle (dead actuator, blown aux fuses, dead actuator, etc.). Does anyone know whether this is true? Should I make the dealer change the fuse and pay the cost or can I just do it myself without worry?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

If it were me I would change the fuse before I made a trip to the dealership. Probably spend more money in gas getting to the dealership than just changing the fuse.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the fuses for the power dock locks on a 2006 montecarlo06ss


DR/LCK fuse 25 amp . located in the I/P block
Fuse Block - I/P
In the right front kick panel

Power Door Locks System Components
The power lock system consists of the following components:
• Body control module (BCM)
• Driver door lock cylinder switch
• Front passenger door lock cylinder switch
• Driver door lock switch
• Front passenger door lock switch
• Door lock actuators in each of the doors
• DR LK Fuse 20-amp
Door Lock System Controls
The Power Door Lock System is controlled by the body control module (BCM) and can be activated by any one of the following:
• A door lock switch lock or unlock actuation
• A door lock cylinder switch unlock actuation
• A keyless entry transmitter actuation
• An automatic door lock actuation (Personalization function)
• An automatic door unlock actuation (Personalization function)
Door Lock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the lock position, it switches the door lock actuator lock control circuit to voltage. Since the lock actuator unlock control circuits are at ground potential within the BCM, the door lock actuator motors transition to the lock position.
Driver Door Unlock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the unlock position, it switches the driver door lock actuator unlock control circuit to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the left front (LF) door lock actuator motor transitions to the Unlock position.
The driver door lock actuator unlock control circuit is a dedicated control circuit used only for the driver door lock actuator motor. This is done so that the driver door may be unlocked by itself using a keyless entry transmitter or an automatic door unlock function (if programmed).
Passenger Door Unlock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the unlock position, it switches the door lock actuator unlock control circuits to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the passenger door lock actuator motors transition to the unlock position.
The door lock actuator unlock control circuits are dedicated control circuits used only for the passenger door lock actuator motors. This is done so that the driver door may be unlocked separate from the passenger doors using a keyless entry transmitter or an automatic door unlock function (if programmed).

Mar 23, 2017 | 2006 Chevrolet Monte Carlo

1 Answer

How do I fix my new tv radio in my 2006 monte carlo, but Im getting power to everything else


Your new radio is likely miswired, is defective, or has blown a fuse. Verify proper wiring.

May 12, 2015 | 2006 Chevrolet Monte Carlo

2 Answers

05 monte carlo no sound from speakers but raido shows its on and fine


If you have an extra speaker lying around you could wire it in by unplugging one speaker and seeing if it works. You have a fuse on passenger side fuse box for the amplifier. Check to see if its blown. A thumbs up would be greatly appreciated if this answer is helpful to you.

Dec 19, 2014 | 2005 Chevrolet Monte Carlo

1 Answer

Where is the fuse location on a 2006 Chevy Monte Carlo?


Depending on what fuse you are looking for, there is a fuse block located on the inside right passenger kick panel.

Behind the I/P, right of the steering column, above the accelerator pedal

Right side of engine compartment, mounted to the strut tower

Jul 28, 2014 | 2006 Chevrolet Monte Carlo

1 Answer

Where is the fuse box for 1996 monte carlo


3 fuse blocks. 1 inside passenger door on dash facing door, 2 under hood front passenger corner,and driverside beside washer tank!

Sep 26, 2010 | 1996 Chevrolet Monte Carlo

1 Answer

Where's the fuse panel in a 2006 monte carlo


The 2 main fuse boxes are on the ends of the dash, one on the drivers side and one on the passenger side, open the door and pull the plastic end pieces off the dash.

Jan 15, 2010 | 2006 Chevrolet Monte Carlo

2 Answers

Where in the heck is the radiator fuses on a 2003 chevy monte carlo SS. The passenger side fan motor has quit but is showing it has power when tested with a testing light?


if you have power there then the fuses are good or relays but if you have power then you ethier have a bad fan or ground wire also that fan should only come on when the ac is on

Aug 27, 2009 | 2003 Chevrolet Monte Carlo

Not finding what you are looking for?
2006 Chevrolet Monte Carlo Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...