Question about 1981 Ford C

Open Question

Where is the solenoid on a 1990 ford cargo 6000

Where is the starter solenoid on a 1990 ford cargo 6000

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 22 Answers

SOURCE: 1990 ford taurus won't turn over 3.0l engine auto

first check all fuses, even the high amp fuses under hood. if you replaced the batt. cable and all that check the wiring in the steering column and the wiring to the fuses under the dash. mice get in there and really make a mess!! it could b the key switch too

Posted on Apr 09, 2009

  • 36 Answers

SOURCE: where is the solenoid in a 1990 ford econoline located..., thanks

follow your positive battery cable. it should be right next to your battery on your fender well.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1990 Ford F250 7.5 V6 has a starter switch. Need wiring diagram for connecting a starter switch.

Not sure I understand your question. A 7.5 ltr Ford would be a V8.
There should be a starter solenoid on the fender that powers the starter. Are you trying to put a switch on the dash for that solenoid?

Jun 13, 2015 | 1990 Ford F250

1 Answer

My 1990 Ford F250 won't start but has new starter, battery and ignition switch

Have you checked for 12 volts coming in going out of the the starter solenoid switch that is mounted passenger side fenderwell.

Jan 14, 2012 | 1990 Ford F250

1 Answer

My 90 Ford 150 key truns on everthing works but dont trun over put new starter solenoid on what could it be ?

you need to check the voltage from the key switch to the solenoid, only if there is power to the solenoid will it work . Once this is correct then the solenoid will click to swittch on the starter motor. If not the starter motor is a suspect, it can be failure of the brush or the commutator.

Jul 07, 2011 | 1990 Ford F150

1 Answer

How do you remove the starter solenoid

you need to disconnect the battery . Remove the starter from the car there may be a plastic cover on the transmission that cover the stater bolts . after you have remove the starter there are two bolts holding the solenoid to the starter. Just some advice if you go to the trouble to remove the starter just replace it as a whole assembly . its takes a little work to get the starter out and would hate to see a starter motor problem along with a solenoid problem

Mar 06, 2011 | 1990 Pontiac 6000

2 Answers

I have a 1990 ford f 250. When I try to start the car the starter winds up but doesn't turn the engine over. Someone told me the starter wasn't engaging and said it needs to be replaced but it started just...

i believe you are hearing the starter turn over but the bendix in the starter is probably bad which is what makes the starter engage the flexplate (flywheel) so unfortunately whoever told you to replace the starter is right, but lucky for you ford trucks have some of the easiest starters to acess

Jan 11, 2011 | 1990 Ford F250

1 Answer

Van won't start. Put in new starter worked for couple of days. need to know how to put in cylinode and where to find it.


Sep 12, 2010 | 2002 Ford Windstar Cargo

2 Answers

Where is the fuel pump o a 1990 ford thunderbird

Dear Fuel Pump Locator.....
The fuel pump for your tbird is located inside the fuel tank of the well as the sending unit for the fuel .Yes it is a bear to get down on the ground...especially without a car hoist.The starter solenoid should be on the LF inner febder under neath the hood of the vehicle...I HPE I HELPED!!

Nov 20, 2009 | 1990 Ford Thunderbird

1 Answer

1990 ford f-150 nothing happens when ignition is turned on

Solenoid was not mentioned as replaced.

If it was not part of new starter...that's the culprit.

Ignition switch (smaller wire) activates the solenoid (heavier wire) which in turn activates the (high current) starter.

Feb 28, 2009 | 1990 Ford F150

1 Answer

Starter stays enegaged on 1990 mustang gt

sounds like solenoid is shorted to ground internally

Dec 02, 2008 | 1990 Ford Mustang

Not finding what you are looking for?
1981 Ford C Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides