Question about Cars & Trucks

1 Answer

I bought a 2004 Pontiac grand prix. The single key it came with was lost, went to GM bought a new key and code. Done the 10 min re-leatn and 30 minute relearn, still not starting. Got the scanner and cleared all codes, and did the relearn again and still not starting. Any suggestions? Didn't come with a key less remote.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Cars & Trucks Expert
  • 226 Answers

WHAT ARE YOU USING FOR SCANNER IS THE QUESTION, YOU NEED A TECH II SCANNER FOR THE FOBE.

Posted on May 09, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: Anti-theft code 1995 Pontiac Grand Prix

DO a google search for Radio lock codes with you make model vehicle,, for 7$ you can get it,,here is what I found for a 2000 gp..
1. Press and hold presets 2 and 3 for about 7 seconds until you get 3 digits on your display. This is the first 3 digits you will need, so write them down.

2. Press the AM/FM button to get the last 3 of the 6 numbers you will need. You only have 5 seconds to do this. If you wait too long before pressing the AM/FM button, the display will go back to LOC. If this is the case, just start over at step 1.

3. Call 1-800-537-5140, press 2 for Pontiac, press 620529 and hit the # key. The computerized voice will ask you for your 6 digit code you have written down. Enter that and press the * key. He will then give you your unlock code, and the option to get additional codes. The first one worked for me so do not worry about the additional ones.

4. Set the code into your radio by pressing the hour set button on your radio until it corresponds with the first 2 digits of your code, then press the minute set button until the last 2 digits of your code are entered. Immediately press the AM/FM button once the correct code is entered and the code SEC or "secured" will be displayed. This part of the procedure is outlined in your owners manual.

5. If you want, you can change your code so you will not forget it, or get rid of the theftlock all together. These procedures are outlined in your owners manual, read it if you would like to change these values.

6. turn on the power to your radio and enjoy.


Hints:

- The first 3 and the last 3 digits were the same on my radio. (for example first 3 were 123 and last 3 were 123) First I thought I was doing something wrong when the display wasn't changing, but I wasn't. Just to let you know it is a possibility.

- The dealer code 620529 is an actual dealer. If GM finds out that this code was leaked to the public, they will remove it from their system. If the dealer code does not work when you phone the 1-800 number, you can search for a new dealer code on the internet somewhere. If this does happen, PM me and I will try to find one that works for you.

gaframe = true; ' + '' + google_ads[i].line1 + '
' + '' + google_ads[i].line2 + ' ' + google_ads[i].line3 + '
' + '' + google_ads[i].visible_url + '
'; } } var adsByGoogleRight = "-40px"; if(dartRecieved){ document.getElementById("ga_300x250").style.clear="both"; document.getElementById("ga_300x250").style.left = "0px"; document.getElementById("inner_adv_caption").style.display = "block"; document.getElementById("ga_300x250").style.width = "370px"; adsByGoogleRight = "5px"; } else if(isHealthinationExist){ var healthinationBox = $('healthonationBox'); if(healthinationBox){ var helthinationBot = getObjXY(healthinationBox)[1]+healthinationBox.clientHeight; var ga_top =getObjXY(document.getElementById("ga_300x250"))[1]; if(ga_top-helthinationBot >0){ document.getElementById("ga_300x250").style.width = "530px"; } else{ document.getElementById("ga_300x250").style.width = "410px"; } } $('boxAdWrapper').style.display = "none"; } else{ document.getElementById("ga_300x250").style.width = "530px"; $('boxAdWrapper').style.display = "none"; } //add "ads by google" var logo_img = 'abg-en-100c-000000.gif'+versionno+''; s += '' + logo_img + ''; document.getElementById("ga_300x250").innerHTML = s; var currl = $('related_links'); var currq = $('related_questions'); if(currl!=null && currq!=null){ var currltop = getObjXY(currl)[1]; if(currltop > rltop ) currq.style.clear="left"; } return; }; //-->

Posted on Mar 12, 2009

  • 42 Answers

SOURCE: 04 pontiac grand prix wont start.

first remove the battery and take it to a auto parts place and have them check it. move on from there. if the battery is good the do a starter draw test. take a meter and hook it to your battery. now have someone try and start the car. if the voltage on the battery drops from 12.8 to below 9 volts then the starter is bad. if the voltage doesnt drop much at all then its prolly the solenoid both of which require starter replacement since most solenoids are on starters. if still nothing then check ignition switch. but before anything else ensure vehicle is in park. if it is in part use a meter to test neutral safety switch.

Posted on Mar 20, 2009

  • 38 Answers

SOURCE: 1996 pontiac grand prix won't start-security problem

hold the reset button on the fuse panel and when it blinks let off of it and it will go away

Posted on Aug 02, 2009

  • 12650 Answers

SOURCE: key locked in 2001 pontiac grand prix battery is

lock smith or someone authorized to use a slimjim[can do more damage if dont know how to use ]--or-- key fob wont work if vehicle battery dead if u can reach up under car at front and release hood latch then jump battery and then use key fob to unlock door

Posted on Feb 20, 2010

Testimonial: "thank u"

Molson02536
  • 3854 Answers

SOURCE: 2005 pontiac grand prix, code p0641 came on. What

DTC P0641 The powertrain control module (PCM) provides a 5-volt reference to the following sensors:

The throttle position (TP) sensor 1
The accelerator pedal position (APP) sensor 2
The engine cooling fan speed sensor
The AC pressure sensor
The fuel tank pressure (FTP) sensor
The oil pressure sensor (OPS)
The PCM monitors voltage on the 5-volt reference circuit. If the voltage is higher or lower than required, DTC P0641 will set.

Conditions for Setting the DTC
The PCM detects a voltage that is higher or lower than required on the 5-volt reference circuit. The above condition is present for 1 second. Action Taken When the DTC Sets The control module illuminates the malfunction indicator lamp (MIL) when the diagnostic runs and fails. The control module records the operating conditions at the time the diagnostic fails. The control module stores this information in the Freeze Frame/Failure Records.
Conditions for Clearing the MIL/DTC The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail. A current DTC, Last Test Failed, clears when the diagnostic runs and passes. A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic. Clear the MIL and the DTC with a scan tool.

Yes i can be dangerous, depending which issues mentioned above has triggered the code such as a faulty gas peddle position sensor. the code can also cause a reduced engine power to activate.

Thank you for using Fixya and best advice is to have the dealer address these issues. A tech 2 scanner would be needed to address the P0641 DTC code.

Posted on Mar 19, 2010

Testimonial: "Thank you for your detailed, easy to understand and very quick response!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After completing the 45 minute relearn procedure for a 2004 Pontiac Grand Prix message center Now says system not programmed


Relearn for what ? Anti theft system PK3 ? The relearn procedure is three 10 min. procedures for a total of 30 min.
30-Minute Relearn Procedure
Use this procedure after replacing the following components:
?€¢
The passkey III (PK3) keys


?€¢
The BCM


?€¢
The PCM, see important above

Important: This procedure is not available on vehicles equipped with option code (Z49).
If replacing a BCM with an GM SPO Replacement Part, perform the procedure to setup a new BCM prior to the 30-minute relearn procedure.

  1. With a master passkey III key, turn ON the ignition, with the engine OFF.
  2. Observe the STARTING DISABLED DUE TO THEFT message on the drivers information center (DIC), after approximately 10 minutes the STARTING DISABLED DUE TO THEFT message on the DIC will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. Important: The vehicle learns the key transponder information and/or passwords on the ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
  6. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  7. With a scan tool, clear any DTCs.

Dec 07, 2015 | Pontiac Cars & Trucks

1 Answer

Lost ignition key on 2006 pontaic grand prix


go to GM dealer with VIN and proof of ownership and order new key.

Apr 08, 2012 | 2007 Pontiac Grand Prix GXP Sedan

2 Answers

2004 ponitiac grand prix temp sensor moves up and down never really reaching 2 line on guage. Last night after driving for 20 mins it went all the way down and stayed there. Heat works fine it also has a...


check tenp sensor wire if its connected turn key on jiggle plug and wires while someone is watching gage with car at operating tenp .becarful doing this while car ir running due to moving parts

Dec 25, 2010 | 2004 Pontiac Grand Prix

1 Answer

What to do when service theft system light goes on in a 2005 pontiac grand prix


  1. wait 10 min with key in start to reset passlock then restart

Dec 24, 2010 | 2004 Pontiac Grand Prix

1 Answer

My 2004 Pontiac Grand Prix runs good for about 5 min. Then the tack goes wild and the car starts to try to quit. No check engin lite and no codes.


It could be the crankshaft position sensor. I have a 2001 Grand Prix, and when the crankshaft position sensor went out, the tach would drop to zero, and the car would act like it wanted to stall for about a second.

Nov 29, 2010 | 2004 Pontiac Grand Prix

1 Answer

2004 Pontiac Grand Prix Service Variable Effort Steering message comes on every time I drive. No other service lights. What needs to be done? llmtucker@bellsouth.net


Hello, You need to read system with a scanner to Find out what code is set and what component, Wiring is causing the fault. Would be best to have system read with a GM scanner.

Oct 02, 2010 | 2004 Pontiac Grand Prix

3 Answers

Engine want start and I get a Starting Disabled Due to theft system message.


2005 grand prix battery went dead then the car would not start
received message starting disabled due to theft system
How can I reset myself

Apr 09, 2010 | 2004 Pontiac Grand Prix

1 Answer

2004 Pontiac Grand Prix, check gas cap


Could possible be the Fuel Tank Pressure Sensor. It is located on top of the fuel pump. The fuel pump access is located in the trunk, under the carpet, behind the back seat. The AutoZone part number is SU 1390.

Apr 02, 2010 | 2004 Pontiac Grand Prix

1 Answer

Got a stuck key out of the ignition, but it activated theft deterrent system, unhooked the battery cables for a while and rehooked back up. system did not reset. is there a way to reset it without taking...


If the ignition lock has not been damaged, ( that's where the GM Passlock system reads the ignition key) here is how you reset the Passlock to youe keys.

Ignition keys relearn takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself.

Good luck and keep me posted, be glad to know you got your car running again.

Nov 16, 2009 | 2005 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...