Question about 2006 BMW 320 Cd

1 Answer

How do I replace front window? where can I buy?

Posted by on

  • Coss May 09, 2014

    Hi SMN C., I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
    When you say front window do you mean the windshield or the window in the front door?

  • Sukmoon C.
    Sukmoon C. May 13, 2014

    Hi I want to replace windshield, but I don't know about the size.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,056 Answers

You are best off taking it to an automotive glass shop and let them do the whole job. The windshield is special curve shape and size specific to that car. The windshield is glued in with a urethane adhesive and there is a trim piece that has to be carefully taken out first so you don't have to buy a new one. The windshield is also a structural member of your car; it acts as part of the overall rigidity of the body and it not to be taken lightly. Leave replacing it to the pros.

Posted on May 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 pontiac g3 wave window noise front driver an passenger window. Is it a bad seal or rubber gasketl? What can i do to fix?


try purchasing a used rubber or window seal from a wrecking yard and replace it as its much cheaper than buying from a dealership

Mar 08, 2015 | Pontiac Cars & Trucks

1 Answer

I have a 2001 Saab 9-3 convertible that has a problem with both of the rear side windows not working and also main swithch that controls front and back not working for two rear side windows.Both front...


Bruce, ur best bet would be to replace the main control switch. change that switch and most likely all will be good. find urself a used main control (window) switch in the front or between front seats. buying used will be a hard find but still u will save money on that.

I hope this work out for u.

Jan 10, 2014 | 1997 Saab 900

3 Answers

1997 mercury grand Marquis driverside rear window motor works but window won't go up. Inner door panel off. Metal cable with a black foam cover and pink plastic clip off. Can't figure what it fits to.


usually this means you need a new window regulator.

Section 01-11: Glass, Frames and Mechanisms 1997 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Window Regulator, Power Front Door
Removal
  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, go to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    3. Disconnect window regulator electric drive harness connector.
    4. sva~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Be careful not to strike or scratch front door window glass because it can break.
      Remove window regulator electric drive retaining screws through holes.
    5. Remove window regulator electric drive (23394) from front door power window regulator.
    6. Raise front door window glass to full up position by hand and secure with tape.
    7. Go to Step 5.

  2. Remove front door trim panel and front door trim shield. Refer to Section 01-05 .
  3. Remove front door window glass as described.
  4. Disconnect window regulator electric drive harness connector.
  5. NOTE: Use care not to enlarge sheet metal holes in the door inner panel.

    Remove two 1/4-inch rivets retaining lower bracket of front door power window regulator to inner panel. Use drift punch to knock out center pins for each rivet. Using a 1/4-inch diameter drill, drill out remainder of rivet.
  6. Remove three window regulator electric drive retaining screws from inside door to remove window regulator electric drive from front door power window regulator.
  7. Remove two window regulator retaining nuts.
  8. Remove front door power window regulator from front door (20124).
Installation
  1. Lubricate regulator mechanism with Teflon® Lubricant E7FZ-19590-A or equivalent meeting Ford specification ESB-M1C111-A.
  1. Install front door power window regulator minus motor (23208) into access hole in inner panel.
  1. Position front door power window regulator using upper studs and tabs on window regulator electric drive mounting bracket.
  1. Install rivets retaining front door power window regulator to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used).
  1. Install two upper front door power window regulator retaining nuts.
  1. Install window regulator electric drive with three screws. Do not overtighten screws.
  1. Connect the window regulator electric drive harness connector.
  1. Install front door window glass.
  1. Adjust front door window glass as described.
  1. Install front door trim shield and front door trim panel. Refer to Section 01-05 snorkelbobby_38.gif

Feb 14, 2011 | 1997 Mercury Grand Marquis

1 Answer

'92 Buick Century s/w -- Both front power windows will lower, but will not raise. Rear windows work OK. What is my most likely problem? Thanks!


find front window regulators for your car, buy them and pay a glass shop to install them. stay away from dealer, you can buy regulators at parts stores and eBay. 10 years is about it for a regulator, do not buy used.

Jan 19, 2011 | 1992 Buick Century

1 Answer

Auto functioning of Left front door Glass failure


ok your electric window motor is broken ,..very easy to replace,if you buy second hand one

Jun 19, 2010 | 2005 Toyota Corolla

1 Answer

2002 Chevy 1/2 ton broken window cable power window


The only way the parts are available is to buy the window regulator assembly.

Jun 14, 2009 | 2002 Chevrolet Silverado

1 Answer

Replace front passenger power window motor


not hard at all remove the door panel and you will see 5 bolts with a slot so you do not have to remove the bolts just loosen them. There is 2 clips that hold this to the window remove them. The hole thing will come out. Look on E Bay buy a new window regulator $40.

May 31, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Passenger side front window window problem.


go to a junk yard and buy a new motor for you window

May 12, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Passenger side power window not working


you want good info?? join www.tacomaworld.com

Dec 03, 2017 | 2004 Toyota Tacoma

Not finding what you are looking for?
2006 BMW 320 Cd Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Doberman

Level 2 Expert

254 Answers

dhnguyen

Level 2 Expert

281 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...