Question about 1994 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Same as 2 dr, or a stick.
There are bezel screws that hold the plastic trim (pointing up towards the windshield), you nee to remove these 2 screws. The bottom section is clipped in. Tilt the steering wheel down as far as it will go.
Once you have the bezel off, there are 4 screws holding the cluster to the dash. Remove them and gently pull the cluster forward. Reach around (expect to get scraped knuckles) and unclip the speedo cable, and two large multipin connectors. Don't force anything.
Getting the cluster out after this point is a test of your patience. It only seems to come out one particular way.
Posted on Aug 22, 2009
For the V-6 model, the dipstick is located down low on the transaxle, on the drivers side of the car, if it is low, usually 1 pint of of fluid is needed to raise from low notch to high notch. also if it appears to be dark or burnt, smells burnt, you should replace the tranaxle fluid. Good Luck!
Posted on Sep 07, 2009
Tips for a great answer:
Oct 12, 2014 | 1997 Honda Accord
Mar 13, 2014 | 1998 Honda Accord
Aug 19, 2011 | 1993 Honda Accord
Feb 21, 2010 | 1997 Honda Accord
Nov 19, 2009 | 1997 Honda Accord
Oct 18, 2009 | 1991 Honda Accord
Mar 31, 2009 | 1994 Honda Accord
Jul 27, 2008 | 1995 Honda Civic
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: