Question about 2002 Chevrolet Tracker

1 Answer

2002 chevy tracker v6 2.5 p0171 p0174

Fuel trim lean bank 1 and bank 2

Posted by on

Ad

1 Answer

TYPE: OBD PO171

Your looking for a rich condition
That is why the fuel trim is driven lean

Add short & long term trim & diagnose those numbers

The oxygen sensors get replaced on all vehicles
at 100,000 miles-that can also be the issue,if they
are slow to switch

The exhaust converter can be on it's way out

And other things as well

Best to let a shop work on finding the main issue

Need professional scan tool to look at data on a road test

Posted on May 09, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1129 Answers

SOURCE: codes P0171, P0174, P0440

This is usually an oxygen sensor, replace the O2 sensor located above the catalytic converter before replacing the evaporator purge canister.

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vehicle CEL is on, various codes


P0300 is a random miss fire , a vacuum leak can cause this as well as low fuel pressure ! weak fuel pump , clogged fuel filter !
DTC P0171: Fuel Trim System Lean Bank 1
DTC P0174: Fuel Trim System Lean Bank 2 These two codes are saying the PCM - engine computer is see a lean condition .
DTC P0191: Fuel Rail Pressure (FRP) Sensor Performance
Circuit/System Description
The fuel pressure sensor is located on the fuel line. The fuel pressure sensor monitors the fuel pressure in the fuel line. The fuel pump flow control module (FPCM) monitors the voltage signal from the fuel pressure sensor.

You don't say what make , model an year vehicle ! These are for GM vehicles , yours could mean something else . Except the first three , those are genaric codes , same for all makes ! So can't say what this codes are P2097, and P2099 ! Can't mean this P2097 - Post Catalyst Fuel Trim System Too Rich Bank 1
P2099 - Post Catalyst Fuel Trim System Too Rich Bank 2

Sep 03, 2016 | Cars & Trucks

1 Answer

What is Pc171 Code


It's P0171 & P0174 not Pc 171 & Pc174 ! The engine computer has detected a lean condition ! That mean's it's not getting enough fuel or has a vacuum leak , bad O2 sensor ! fuel pump getting weak . fuel pressure regulator weak !
P0171 - System to Lean (Bank 1) The Adaptive Fuel Strategy continuously monitors fuel delivery hardware. The test fails when the adaptive fuel tables reach a rich calibrated limit. Refer to Section 1 , Powertrain Control Software, Fuel Trim for more information. Air Measurement System
  • MAF sensor (contaminated, damaged, malfunctioning, etc.)
Fuel System
  • Fuel pressure regulator (leaking, malfunctioning, etc.).
  • Fuel filter plugged, dirty.
  • Fuel pump (weak, check valve leaking, etc.).
  • Leaking/contaminated fuel injectors.
  • Low fuel pressure or running out of fuel.
  • EVAP canister purge valve leaking (when canister is "clean").
  • Fuel supply line restricted.
  • Fuel rail pressure sensor (incorrect reading).
Air Induction System
  • Air leaks after the MAF.
  • Vacuum Leaks.
  • PCV system (leak, valve stuck open, etc.)
  • Improperly seated engine oil dipstick.
Exhaust System
  • Exhaust leaks before or near the HO2Ss (exhaust manifold gasket, mating gaskets, etc.).
EGR System
  • EGR valve tube/gasket leak
  • EVR solenoid vacuum leak
Secondary Air Injection
  • Damaged/malfunctioning secondary air injection system (mechanically stuck valve).
  • P0174 - System to Lean (Bank 2) The Adaptive Fuel Strategy continuously monitors the fuel delivery hardware. The test fails when the adaptive fuel tables reach a rich calibrated limit. Refer to Section 1 , Powertrain Control Software, Fuel Trim for more information. See Possible Causes for DTC P0171. See Diagnostic Aides for DTC P0171
View Freeze Frame Data to determine operating conditions when DTC was set. Observe LONGFT1 and 2 PID(s). Refer to Section 2 , Adaptive Fuel DTCs Diagnostic Techniques for more information.

Feb 12, 2015 | 2002 Ford Escape

1 Answer

What is p0171 p0174?


P0171 Fuel trim bank one condition Lean (If bank one and two codes set together suspect fuel pressure or MAF sensor. Or O2 sensor defective
P0174Fuel trim bank two condition Lean (same as above or Failed H02S21 Heated O2 sensor Bank 2 sensor 1)

May 11, 2014 | 2000 Jeep Grand Cherokee

1 Answer

4 Codes in computer


code p0128 indicates a mechanical fault ( could be the thermostat stuck open)
code p0174 -system too lean -bank2 ===causes --intake /exhaust leak--fuel pressure/pump--injectors--AIR system--hose connection/s
code po171 refers to system too lean bank 1 same as po174 with the HO2S sensor being the culprit. As to all being related . only by way of the o2 sensors
code p0442 is not connected to the first 3 as it is in a different section of the fuel system

Apr 09, 2014 | 2003 Saturn VUE

1 Answer

Engine light on


P0171 ; Fuel Trim System Lean (Bank 1)
P0174; Fuel Trim too Lean (Bank 2)
fuel trim is system to modify injector pulse if system go lean it will go rich when the system is too much lean and is max.rich it code
look for 02 sensor bank 1 and 2 data
hope it helps

Mar 31, 2014 | 2003 Chevrolet Malibu

1 Answer

I have got a P0171 & P0174 engine codes on my 2001 mercury sable. What do I do to fix it.


P0171 System Too Lean Bank 1
P0172 System Too Rich Bank 1
P0173 Fuel Trim Bank 2
P0174 System Too Lean Bank 2

OK, that's a partial list of codes, the fuel delivery is controlled by the oxygen sensors, so it's possible that something in that area could be causing your problem.

However, it could also be clogged fuel injectors that can't deliver enough fuel to the cylinders compared to the air that is pulled into the engine.

Try some fuel injector cleaner for that poured into the gas tank.

How does it run?
Does it miss at all?

Oct 08, 2010 | 2001 Mercury Sable

2 Answers

P0313;Misfire Detected with low fuel P0171-System too lean{bank1} P0174 System too lean{bank2} drive cycle


P0313 - Misfire Detected with Low Fuel
P0174 -System too Lean (Bank 2).
P0171 -System too Lean (Bank 1).

P0171 and P0174 mean "system too lean" for banks 1

Aug 24, 2010 | 2000 BMW 3 Series

1 Answer

What do these trouble codes mean p0171 and p0174


po171 is system too lean,bank 1,po174,is system too lean,bank 2,It sounds like a fuel pressure problem.

Jan 05, 2010 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet Tracker Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...