Question about 1992 Volvo 940

1 Answer

No electricity in coil - 1992 Volvo 940

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 130 Answers

Replace with a new coil.

Posted on May 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a coil pack on a Chevy Tahoe


To Remove......
1. Remove the spark plug wire from the ignition coil.
2. Disconnect the ignition coil electrical connector.
3. Remove ignition coil bolts.
4. Remove ignition coil.

To Install.....
1. Install ignition coil.
2. Install ignition coil bolts.
3. Tighten ignition coil bolts to 8 Nm the same as 71 inch pounds.
4. Connect ignition coil electrical connector.
5. And finally, install spark plug wire to ignition coil.

Apr 22, 2015 | Chevrolet Tahoe Cars & Trucks

1 Answer

Where are the coil packs located on an 04 Lincoln LS v8? I have traced the wires from the spark plugs, but cannot see where they lead...


This is for the 3.0L engine:

3.0L Engine
  1. Remove the engine appearance cover.
  2. To access the right bank ignition coils, remove the upper intake manifold..
  3. Disconnect the electrical connector from the ignition coils.
  4. Remove the bolts.
  5. Remove the ignition coils.

c17hydro_182.gif


To install:


  1. Replace the ignition coils.
  2. Connect the electrical connector to the ignition coils.
  3. Remove the upper intake manifold for the right bank ignition coils.
  4. Replace the engine appearance cover.


May 12, 2011 | Lincoln LS Cars & Trucks

1 Answer

Where would the pvc value be on a 300 chrysler 2006? also where would the spark plugs be located?


Positive Crankcase Ventilation (PVC) Valve Removal & Installation 5.7L Engine To Remove:
    1.The PCV valve is mounted into the top/right side of the intake manifold.

    2.The PCV valve is sealed to the intake manifold with two O-rings.

    3.Free the PCV valve by rotating counter-clockwise 90 degrees until the locating tabs align with the openings on the manifold.

    4.Remove the PCV valve by pulling straight up from intake manifold and clearing the tabs.

    5.Check the condition of two valve O-rings.
To Install:
  1. Clean the PCV valve opening on the intake manifold.
  2. Inspect the PCV valve O-rings. Replace if suspect.
  3. Apply engine oil to the two O-rings.
  4. Place the PCV valve into intake manifold.
  5. Rotate the valve 90 degrees clockwise for installation.
6.1L Engine To Remove:
  1. The PCV valve is threaded into the right-front corner of the intake manifold.
  2. Remove the rubber hose from the PCV valve.
  3. Unscrew the PCV valve from the intake manifold.
To Install:
  1. Clean the PCV valve opening on the intake manifold.
  2. Check the condition of the PCV valve O-ring. Replace if suspect.
  3. Check the condition of the PCV valve threads and clean if necessary.
  4. Apply engine oil to the O-ring.
  5. Install the PCV valve into intake manifold.
  6. Install the rubber hose to the PCV valve.
prev.gif next.gif
The spark plugs should lead to the coil pack via a spark plug wire but may be hidden by a plastic cover.

The following details the ignition coil changing on the Chrysler 300:

2.7L Engine To Remove:
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold.
  3. Use compressed air to clear the area around the ignition coil and spark plug.
  4. Disconnect the electrical connector from the ignition coil.
  5. Remove the two fasteners securing the ignition coil.
  6. Remove the ignition coil.
To Install:
  1. Install the ignition coil.
  2. Tighten the fasteners to 55 in-lb (6.2 Nm).
  3. Connect the electrical connector to the ignition coil.
  4. Install the intake manifold.
  5. Connect the negative battery cable.
3.5L Engine To Remove:
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold.
  3. Use compressed air to clear the area around the ignition coil and spark plug.
  4. Disconnect the electrical connector from the ignition coil. NOTE: Loosen the ignition coil fasteners by alternating back and forth. Do not lose the spacers under the coil when loosening the fasteners.
  5. Remove the two fasteners securing the ignition coil.
  6. Remove the ignition coil.
To Install:
NOTE: Tighten the ignition coil fasteners by alternating back and forth. Do not lose the spacers under the coil when installing the coil.
  1. Install the ignition coil.
  2. Tighten the fasteners to 60 in-lb (6.7 Nm).
  3. Connect the electrical connector to the ignition coil.
  4. Install the intake manifold.
  5. Connect the negative battery cable.
5.7L Engine (2005) To Remove:
NOTE: Carefully note the position of each spark plug cable before disconnecting them so they can be installed in their original positions to prevent misfire.
NOTE: The throttle body intake air duct or intake air box may need to be removed to gain access to certain ignition coils.
  1. Disconnect the electrical connector from the ignition coil.
  2. Remove the secondary ignition cable from the coil.
  3. Use compressed air to clear the area around the ignition coil.
  4. Remove the two fasteners securing the ignition coil. Bolts are retained to coil.
  5. Remove the ignition coil. Pull with a slight twisting motion to help release the boot seal with the spark plugs.
To Install:
NOTE: Apply a light film of dielectric grease to the inside of the coil boots before installation.
  1. Clean area around spark plug and coil mounting area with compressed air.
  2. Install the ignition coil.
  3. Tighten the fasteners to 105 in-lb (12 Nm).
  4. Connect the electrical connector to the ignition coil.
  5. Connect the secondary ignition cable to the coil.
  6. Install the air duct or air box if removed.
Ignition coil mounting bolts (5.7L & 6.1L engines) chry-02-57-263.gif

5.7L (2006) & 6.1L Engine To Remove:
NOTE: Each ignition coil, mounted on the valve cover, fires two spark plugs at each cylinder.
  1. Disconnect the negative battery cable.
  2. Use compressed air to clear the area around the ignition coil and spark plug.
  3. Disconnect the electrical connector from the ignition coil.
  4. Remove the two fasteners securing the ignition coil.
  5. Remove the ignition coil. Pull with a slight twisting motion to help release the boot seal with the spark plugs.
To Install:
NOTE: Apply a light film of dielectric grease to the inside of the coil boots before installation.
  1. Install the ignition coil.
  2. Tighten the fasteners to 105 in-lb (12 Nm).
  3. Connect the electrical connector to the ignition coil.
  4. Connect the negative battery cable.
prev.gif next.gif

Sep 24, 2010 | 2005 Chrysler 300

1 Answer

There is a misfire in my engine, changed plugs & wires. now it reads that the fuel leveling sensor is bad, will this help?


If there is a misfire, the cylinder that it is misfiring in will be recorded as a code in the computer.

Have the car scanned to determine which cylinder is bad. Then, replace the coil pack going to that cylinder.

Ignition Coil Pack Removal & Installation 2V Engine To Remove:
  1. Twist the spark plug wires off of the ignition coil towers. Mark the spark plug wire positions so they can be installed in their original positions.
  2. Disconnect the electrical connector from the ignition coil. CAUTION
    When removing the spark plug wires, a slight twisting motion will break the seal and ease removal.
    coilconn.gif

  3. Remove the mounting screws and remove the ignition coil.
To Install:
  1. Position the ignition coil pack on engine.
  2. Install mounting screws and torque to 53 in-lbs. (6 Nm). coilbolt.gif

  3. Connect ignition coil pack electrical connector.
  4. Match previously marked spark plug wires to ignition coil and install.
4V Engine To Remove:
  1. Remove the RH cowl grille cowlpic.gif
  2. Remove the screws and the water shield
  3. Mark spark plug wire positions
  4. Disconnect the spark plug wires from the ignition coil CAUTION
    When removing the spark plug wires a slight twisting motion will break the seal and ease removal.
  5. Disconnect the ignition coil electrical connector coilconn.gif

  6. Remove the mounting screws and remove the ignition coil
To Install:
  1. Position ignition coil pack. Install mounting screws and torque to 56 in-lbs. (6Nm)
    coilbolt.gif

  2. Connect ignition coil pack electrical connector
  3. Match previously marked spark plug wires to ignition coil and install
  4. Position water shield and install screws
  5. Install RH cowl panel
prev.gif next.gif

Aug 11, 2010 | 2002 Ford Taurus

1 Answer

Were are the spark plugs on a 2000 dodge intrepid r/t 3.5


Ignition Coil Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The spark plug cables from coil pack
    • The electrical connector Coil Pack dod_intrpd_coil_pack.gif

    • The ignition coil fasteners
To Install:
  1. Install or connect the following:
    • Ignition coil fasteners
      1. Torque to: 105 inch lbs. (12 Nm)
    • The electrical connector Ignition Wire I.D. dod_intrpd_coil_pack_id.gif

    • The spark plug cables to coil pack
---
Ignition Coil-On-Plug Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Electrical connector from ignition coil. NOTE: On 3.5L engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the spacers under the coil when loosening the screws.
    • 2 fasteners from ignition coil assembly
    • Ignition coil assembly.
To Install:
  1. Install or connect the following:
    • Ignition coil assembly
    • Screws
      1. 2.7L engine - 55 inch. lbs. (6.2 Nm)
      2. 3.2L engine - 60 inch. lbs. (6.7 Nm)
      3. 3.5L engine - 60 inch. lbs. (6.7 Nm)
  2. Connect the electrical connector.
prev.gif next.gif

Aug 10, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

How to replace the coil pack on V6 heritage?


prev.gif next.gif Ignition Coil Removal & Installation 4.2L Engine To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The ignition coil electrical connector
    • The spark plug wires (marking for reinstallation) CAUTION
      Each sparkplug wire must be connected to its correct ignition coil terminal.
    • The ignition coil
    • The bolts
  3. Inspect the ignition coil for carbon tracks or damage.
To Install:
  1. Inspect the ignition coil for carbon tracks or damage.
  2. Install or connect the following:
    • The bolts
      1. Torque To: 53 inch-lbs (6 Nm) (2005-2006)
      2. Torque to: 62 inch-lbs (7 Nm) (2007)
      CAUTION
      Each sparkplug wire must be connected to its correct ignition coil terminal.
    • The spark plug wires (marking for reinstallation)
    • The ignition coil electrical connector
    • The ignition coil
4.6L and 5.4L Engines To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The negative battery cable
    • The ignition coil electrical connector
    • The ignition coil retaining bolt
  3. Rotate the ignition coil clockwise 30-40 degrees to clear the fuel injection supply manifold.
  4. Remove the ignition coil with a twisting motion while pulling up.
To Install:
  1. Install or connect the following:
    • Dielectric compound to the inside of the coil boots
    • The ignition coil with a twisting motion while pushing down
    • The ignition coil retaining bolt
      1. Torque to 53 inch-lbs (6 Nm) for (4.6L 2004 and 5.4L 2004-2007)
      2. Torque to 89 inch-lbs (10 Nm) for (4.6L 2005-2007)
    • The ignition coil electrical connector
    • The battery ground cable
NOTE: Ensure that the ignition coil spring is correctly located inside the ignition coil boot and that there is no damage to the tip of the boot.

Jul 16, 2010 | 2004 Ford F150

1 Answer

How are cylinders numbered 1-8


4 8
3 7
2 6
1 5
FRONT

The coils are very simple to change. You will only need a socket wrench, extension and, if I remember correctly, a 7mm socket.

1. remove electrical connection on coil.
2. remove bolt holding down coil
3. twist and pull to remove coil
4. apply di-electric grease inside new coil
5. press onto plug
6. apply di-electric grease inside electrical connector
7. bolt down coil
8. reconnect electrical connection.

After you are done, you will wonder why the dealership charged you so much for something so simple that can be done in 15 minutes, taking a beer break between each coil.

If this was helpful to you, please rate my answer. Thanks, Rolanddirty

Jan 07, 2010 | 1999 Ford F250 Regular Cab

3 Answers

Coil pack. what and where is it? what does it look like?



 
 
Ignition Coil
Removal & Installation
4.2L Engine
1997-2000
To Remove:

Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The radio ignition interference capacitor connector
The locking tabs
The six ignition wires, marking for reinstallation
The brackets
The spark plug wire set
CAUTION
Spark plug wires must be connected to the proper ignition coil terminal. Mark spark plug wire locations before removing them.
The accelerator cable bracket nut
The accelerator cable bracket bolt
The accelerator cable bracket and position it aside.
The two ignition coil nuts
The ignition coil stud bolt
The ignition coil
To Install:
Install or connect the following:
The ignition coil
The two ignition coil nuts
The ignition coil stud bolt
Torque to: 71-98 inch-lbs (8-11 Nm)
The accelerator cable bracket
The accelerator cable bracket nut
The accelerator cable bracket bolt
Torque to: 71-98 inch-lbs (8-11 Nm)
The ignition coil electrical connector
The radio capacitor connector


CAUTION
The Spark plug wires must be connected to the proper ignition coil terminal.
Squeeze the locking tabs and connect the six ignition cables.
2001-2003
To Remove:

Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The spark plug wires, marking for reinstallation
CAUTION
The sparkplug wires must be connected to their correct ignition coil terminal.
The ignition coil
The bolts
Inspect the ignition coil for carbon tracks or damage.
To Install:
Inspect the ignition coil for carbon tracks or damage.
Install or connect the following:
The ignition coil
The bolts
Torque to: 53 inch-lbs (6 Nm)
The ignition coil electrical connector
The spark plug wires, in their original positions
4.6L Engine
1997-1999
To Remove:

NOTE: This procedure is for either RH or LH ignition coil.
Before servicing the vehicle refer to the precautions at the beginning of this section.
Remove or disconnect the following:
The ignition coil electrical connector
The radio capacitor electrical connector
The spark plug wires by squeezing the locking tabs (four each side)
CAUTION
The spark plug wires must be connected to their proper ignition coil terminal. Mark spark plug wire locations.
The bolts
The ignition coil
To Install:
NOTE: The procedure is for either LH or RH ignition coil
Install or connect the following:
The ignition coil
The bolts
Torque to: 44-62 inch-lbs (5-7 Nm)
The ignition coil electrical connector
The radio capacitor electrical connector
The spark plug wires (four each side), into their original positions by squeezing the tabs


CAUTION
The spark plug wires must be connected to their proper ignition coil terminal.

 
Top of Form 1
Bottom of Form 1

Mar 28, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Cr anks won't start when wet out


The ignition coil wis defective, possible crack in the coil case. When it is wet, the coil case becomes wet, and the electricity shorts (arcs) to the coil frame. Hence, no electricity will flow into the distributor, or plugs, etc... When it is dry, it is harder for it to short to ground, so the cracked coil will work (somewhat). To check for this, try the following when it won't start. Lift your engine cover off and locate the coil. Make sure the wire (coil to the distributor) is firmly connected at both ends. Turn the key and watch the coil. If you see blue-white electrical arcing, you have a bad coil.

Dec 29, 2008 | 1995 Lincoln Town Car

1 Answer

Po358 ignition coil H primary / secondary circuit malfunction. how do i fix this?


Hi...
On your HUMMER . the CODE P0358. refer to Electrical problem.
Or malfuntion of the ignition coil. cylinder # 7.. The last one in Driver side. Start from Front to Back. The firing order is: Driver side, 1,3,5,7,. Passanger Side 2,4,6,8.
Primary circuit. Is the Spark Plug Wire.
Secondary circuit. Is the Electrical connector on the Ignition Coil.

Check the condition of the Spark plug, Spark plug Wires. and ignition coil. and the ignition coil Electrical connector.

OK.. I hope this help on your problem.
Thank you for use fixya.

Sep 23, 2008 | Hummer H2 Cars & Trucks

Not finding what you are looking for?
1992 Volvo 940 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...