Question about 1986 Toyota MR2

1 Answer

How do I get a manual for the 1986 Toyota MR2?

I need to find a manual with a fuel line diagram for my '86 Toyota MR2. I need to locate the fuel relay switch and the fuel filter.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Try they the best.

Posted on May 08, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: fuel filter location

The oil filter is in an aluminum cylinder on the engine. It is not a "spin on" filter, it is now a cartridge-type filter. When you get one, make sure that you use the new o-rings provided in the filter box. The fuel filter is in the tank. Hope this helps, the graciousness of a FixYa rating would be appreciated. Thanks.

Posted on Dec 09, 2008

  • 337 Answers

SOURCE: fuel filter

Posted on Dec 18, 2008

  • 176 Answers

SOURCE: location of fuel pump relay on mr2, 3s-ge engine

it seem to be in the left rear fender well beside the injector relay you have the EFI relay

Posted on Jun 11, 2009

  • 733 Answers

SOURCE: location of fuel filter on toyota echo 2000.Is

It's in the gas tank. Found this on another site so all credit to the original poster. Anyways, here's the link that has very detailed instructions on how to replace it.

Posted on Sep 26, 2011

  • 76073 Answers

SOURCE: location of fuel pump relay 1994 toyota corolla

The fuel pump relay is located in the fuse box drivers side of fuse box

Posted on Jan 26, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What size of engine does a 1986 Toyota MR2 have?

their were 3 engines for the gen 1 mr2 a 1.5 --1.6---1.6 supercharged
Toyota MR2 Wikipedia the free encyclopedia

Oct 05, 2016 | 1986 Toyota MR2

1 Answer

I need wireing. Diagram. For 86 Toyota. 22.r

have you tried to find a manual for your car at the library. they do have an auto section that has manuals. you may have to go to more than one library. this way you will have the diagram in front of you any time you work on the car.

Apr 07, 2015 | 1986 Toyota Pickup 4WD

1 Answer

Where is fuel pump relay switch 1986 mr2 toyato

The relay should be in the engine compartment near the battery.

Aug 25, 2012 | 1986 Toyota MR2

1 Answer

My mr2 86 doesn't crank

Make sure you have a good battery/connections. Make sure you have power down to the starter on the B+ terminal if not replace faulty wire or clean/dirty connectionson ensure connections are tight. While someone turns the key make sure you have power in the S terminal. If power make sure the engine isn't locked up and replace the starter. If no power you may have an issue with the ignition switch circuit (stitch, wiring, fuses....)

Mar 09, 2012 | 1986 Toyota MR2

1 Answer

I just bought a 86 MR2 it starts right up but then immediately dies. The previous smog test called it a gross polluter.Any ideas?

could be a mass air flow sensor problem, or a manifold pressure sensor problem. may have several major vacumn leaks that are used to sense and control fuel injection supply pressure and fuel flow. Might check manifold pressure. Check vacumn. inspect lines. there are several lines on air flow inlet. there are several vacumn control valves also. Would suggest obtaining an emmisions line chart. There is usually a decal showing the hose routing on the vehicle some where in the engine compartment.

Oct 14, 2010 | 1986 Toyota MR2

1 Answer

Diagram of pullies and belts on 86 toyota mr2

If you are talking the a/c pulley and alternator pulley, I am pretty sure the belts are different sizes (different number of ribs in the belt). So, you can just look carefully at the ribs and put the right belt on the right pully. from memory, the A/C belt goes on first and all the pullies towards the front of the car are used for that belt. The Alternator belt goes on next, and all the pullies from the crank shaft toward the back of the car (from the crank pulley) go to that. I could have those reversed, but the ribs on the belt will show you for sure. have fun!

Mar 06, 2010 | 1986 Toyota MR2

1 Answer

Head gasket was leaking on my 86 mr2 Replaced the

Check all the wiring connections that you loosened or took off when you removed the head. something is loose or disconnected ,eg., ground wires .
Make sure you have spark at spark plugs whemn cranking ,and fuel pressure.
Did you try spraying starting-fluid in the intake, see if the engine runs for a little bit.
Compression to be anything above 100 psi will firean engine ,sometimes lower too.

Nov 01, 2009 | 1986 Toyota MR2

1 Answer

Location of fuel pump relay on mr2, 3s-ge engine. any answers?

it seem to be in the left rear fender well beside the injector relay you have the EFI relay

Jun 11, 2009 | 1986 Toyota MR2

Not finding what you are looking for?
1986 Toyota MR2 Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides