Question about 1998 Volvo S70

Open Question

How do i fit a new oil seal on a peugoet 207 front cam shaft

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22265 Answers

SOURCE: i need to replace the cam front oil seal how do i

time engine up first and paint the timing marks ,then remove the belt ,rocker cover ,slacken the camshaft retaining bolts slackening each bolt 1 turn at a time so you do not break camshaft ,also remove the front pulley of course ,often i do this first whilst the belt is still on to stop it turning ,and shock it with tap of the hammer on the end of the spanner .easy job to do and shouldnt take more than 3/4 hour ,

Posted on Mar 04, 2010

Testimonial: "i am going to try this unfortunatly i moved my cam pully which i was told put the timeing off. do you have any instructions on the timeing"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant put into gear. Errors anti pollution sytem failure. Low oil pressure


change mechanics --or bring back and have them fix correctly when they did the engine work doesnt sound like was done correctly and now you may have a bigger problem

Aug 08, 2016 | 2007 Peugeot 207 CC

1 Answer

Is a nissan 2.4L DOHC engine an interference fit?


autodata identifies all nissan 2.4 liter engines as interference fit
there are special requirements when fitting the belt so a workshop manual would be a big advantage to do the job right
replace all idler pulleys as the nearings will be at service life as well
if there is indication of oil stains in the covers , replace both cam shaft and crank shaft seals as oil is the major destroyer of cam belts

Jan 21, 2016 | 1998 Nissan Frontier

2 Answers

Oil leak on a '92 Geo Tracker. Installed an O Ring, but still leaking. Any suggestions?


O-ring where? The drain plug? Distributor shaft? Or do you mean oil seal?
Geo oil drain plug specifies a compressible copper ring washer I think? Need to clean the surfaces well, and torque to spec. My own plug's seal is not perfect, but only a drop here and there usually. Autozone or NAPA can supply you a new plug and washer if needed.

Apr 19, 2015 | 1992 Geo Tracker

1 Answer

Peugeot 207 1.4, small oil leak from underneath, added engine stop leak, how long before it stops leak?


oil leaks from underneath can come from front crank shaft seal --rear crank shaft seal --oil filter--sump gasket---power steering ---leaking rocker cover gaskets ---leaking oil pressure switch.--transmission seals. I suggest that you have the engine professionally cleaned and then put it on a hoist while running to see where the oil is from

May 14, 2014 | 2007 Peugeot 207 1.4

1 Answer

Free vehicle repair manuals


yes there is a seal on the cam shaft behind the water pump pully
undo that bolt
you have to undo the cam shaft to get to it .dont drop the lifters
19 nm for the can bearing bolts ..do not overtighten the two rocker cover bolts you can crack the rocker cover or split the cam bearing those bolts tight into
many say not to use silicon but because of the age of the car you need to use the blue silicone on the half moon the rocker gasket and the cam seal ..there are no online repair manuals for the tm-tp magnas ..the rocker covers can warp but rare

Apr 19, 2014 | 1986 Mitsubishi Magna

1 Answer

Oil pump leak toyota camry


You need to remove the front part of the oil pump and reseal it with an oil pump reseal kit from the parts store. Do yourself a favor and put in a new oil pump shaft seal as well. While you are at it change the front crank and the front cam seals, as they are all made from the same type of rubber.

Mar 26, 2014 | 1993 Toyota Camry V6

1 Answer

The leak seems to be coming from the shaft holding the pulley


Presuming you are talking about an oil leak from behind a pulley? All shafts as they exit the engine, have an oil seal fitted in the case and supply a tight seal to the shaft, if oil is leaking the seal is worn and needs replacing. depending on what the pulley is driving (cam belt), it could be a big job.

Dec 27, 2013 | 1997 Audi A4

1 Answer

Is the front engine seal related to the time chain tensioner seal got a link behide the timeing belt


Don't quiet understand your question...but here's some insight.

The chain is under the valve cover/s ( 1.8t and some 2.8 V6.) and drives 2 or 4 cam shafts.

If it is the VR6 engine then the chain is in the front of the engine.

1.8t has seals on at cam sensor at rear of head and seals at front for crank and cam. To install it needs belt removed for front seals. 2.0 gas engine same except no rear cam seals.

All oil seals are now Teflon and a new instal procedure must be followed. Briefly : Installed dry...allowed to sit 4 hours before engine started.

Post again if this does not answer your question. We need year and model to give you a definitive answer.

Jan 12, 2011 | 2002 Volkswagen Passat

2 Answers

1989 honda accord oil leeak cam/crankshaft


Take valve cover gasket bolt out replace... An when you do the lower crank seal you have to take off oil pan.. Big job but it can be done..

Jun 27, 2009 | 1989 Honda Civic

Not finding what you are looking for?
1998 Volvo S70 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...