Question about Toyota Dyna

Open Question

How do you check clutch fluid on a Toyota Dyna

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Toyota hiace diesel van clutch slipping. Are brake and clutch fluid the same? Cheers


Yes they are the same . Check that the master cylinder is operational as a slipping clutch can be a blocked compensating port not allowing the fluid to drain back to the reservoir and holding the pressure on the clutch release.

Oct 06, 2014 | 2007 Toyota Hi-Ace 220

1 Answer

Clutch not working on 1989 toyota camry


first thing to check is the clutch fluid/brake fluid resevoir. if thats empty that could be your suspect if not then id safely say that your clutch release bearing needs replaced.

Jul 23, 2014 | 1989 Toyota Camry

1 Answer

Toyota dyna clutch slave cylinder adjustment


l have done all but the clutch is still same is not even working properly maybe the clutch plate and pressure plate its gone

Feb 17, 2013 | Cars & Trucks

1 Answer

Where is the clutch fluid refill located on a 1998 toyota rav4. I found the brake fluid reservoir, but am not seeing a reservoir for clutch fluid. Any help


If you look at the drivers side of the brake fluid reservoir you should see a rubber hose that feeds to the clutch master cylinder. The clutch master cylinder is kept full via the brake fluid reservoir.

Dec 30, 2012 | 1998 Toyota RAV4

1 Answer

Front wheels not working in 4wd


PROBLEM COULD BE IN 4WD CONTROL SWITCH.OR THE CLUTCH RELEASE CYLINDER THAT CONTROL CLUTCH ENGAGEMENT WITH THE SHORT SHAFT COULD BE DAMAGED OR NEED LUBRICATION. CHECK CLUTCH RELEASE CYLINDER FLUID LEVEL..ALSO CHECK TRANSFER CASE LUBRICANT LEVEL.IF FLUID VERY OLD REPLACE FLUID.

Dec 10, 2010 | 1983 Toyota Land Cruiser

1 Answer

My daughter's 1997 Camry V-6 - Clutch pedal will go to the floor and sometimes won't come back. Checked fluid in clutch reservoir - OK. No fluid leaking. Had her press the clutch pedal and everything...


try bleeding the clutch slave cylinder its just like bleeding brakes just follow the line from the clutch master cylinder where you checked the fluid to the slave cylinder and pump the clutch three times and hold it to the floor while someone loosens the relief valve you repeat until no air comes out and it is all fluid then you check you fluid level again to make sure it is full then if the problem continues it might be time for a clutch replacement

Oct 20, 2010 | Toyota Camry Cars & Trucks

2 Answers

The cluch is not working properly in my toyota 94 dyna it keeps going soft


You probably have a week slave cylinder that actuates the Hydraulic clutch and it is time to replace it!

Aug 05, 2010 | 1994 Toyota Pickup

2 Answers

What kind of fluid does my 1994 toyota paseo clutch system take


Hello.

All Toyota vehicles take standard brake fluid for the clutch hydraulics.

Jan 04, 2010 | 1994 Toyota Paseo

1 Answer

Hard shifting, want to check manual trans fluid?


Check first the status of the clutch fluid. If the fluid seemed to drop check for leaks in the side of the transmission and up in the pedal. If here is, the culprit is the clutch master. If there is non, have the clutch and the pressure plate checked out.

Jun 03, 2009 | 1988 Toyota Corolla 4 Door

1 Answer

Where can I check the clutch fluid on a Toyota hiace 1997?


you can find the bake fluid pot ether under the dashbord or under the engine cover its got a silver top on it ok
this should anser youre qestion

Jan 03, 2009 | 1994 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...