Question about 2003 Volvo S60
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: volvo s60 idle sensor
if you could get your hands on a scanner to read some live data it would help your plight,there is a cam position sensor when you take of the the plastic head cover at the timing belt end,did you check plugs,it also might help to clean the maf with some contact spray,sounds like plugs
Posted on May 27, 2009
SOURCE: Volvo S60 sensor ?
Sounds like an oxygen sensor (there are two). I had a recent problem where I had a rough idle and my S60 continued to stall out. Turned out to be the rear oxygen sensor. After replacement, car idles nicely and car drives normally.
Posted on Jun 30, 2009
I'm assuming you have an automatic trans. So the first thing is check the transmission fluid. To do this have car warmed up, idling, and sitting level. Pull out the transmission dipstick and check level, add if necessary. Also check and see if the fluid has a burnt smell. If the fluid was low and you added fluid road test and if it still slips, and/or the fluid had a burnt smell the transmission needs to be serviced or overhauled. To have major transmission work done go to a good transmission shop, unless you have a lot of mechanical know how and experience I don't reccommend trying this one on your own. Hope this helps. Good Luck.
Posted on Sep 26, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 04, 2009
Yes just make sure it's out of the same year and the plug ins match up in the back.
Posted on Jun 14, 2012
Testimonial: "Thank you. The one im trying is out of a 2001 but the part numbers are the same and the plug in is identical but all I get out of it is a check engine light. It works fine if I put it back in the car it came out of."
Tips for a great answer:
Feb 07, 2016 | 2003 Volvo S60
Jun 05, 2014 | 2004 Volvo S60
May 31, 2017 | 2002 Volvo S60
Aug 22, 2012 | 2002 Volvo S60
Aug 24, 2011 | 2003 Volvo S60
Feb 06, 2011 | 2003 Volvo S60
May 11, 2010 | 2002 Volvo S60
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: