Question about 2005 Hyundai Getz 1.6

1 Answer

Hyundai getz problems forum

2004 Getz 1.1gsi There is a rattle/vibration when accelerating up and down through the gears. When in top gear and you take your foot of the gas the rattle/vibration stops. It feels like I'm not going fast enough for that particular gear!! Thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Sounds like a universal joint problem the clue is the increasing rattle/vibration upon accelerating.have your mechanic put the vehicle up on the lift and check the universal joints. I personally don't feel that Hyundai has gotten their standard of reliability to the level of lets say Honda,Toyota,or Nissan.Granted the newer ones have a lot of warranty (And they need it)My recommendation would be if it is doable is to trade it in on a newer Hyundai or switch to a more reliable brand of vehicle. I have consistently purchased Toyotas and they are very reliable to upwards of three-hundred thousand miles given routine maintenance. I hope this was helpful? good luck

Posted on May 08, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
HansPP
  • 2510 Answers

SOURCE: how to replace rear brake

Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Posted on May 15, 2011

  • 53 Answers

SOURCE: hyundai getz

if the speedo still works then it will need a spedo unit if the speedo doesn't work it is either the cable or the gear in the trans to check the cable unthread from trans and attach a drill to the cable innereds spin the drill if the speedo does not move replace the speedo cable

Posted on Oct 18, 2008

ghost4548
  • 776 Answers

SOURCE: hyundai getz radio

Here's a pic

5781d0b.jpg
Pops out, then remove 4 screws which mount the audio & instrument panel.7be2186.jpg

Posted on Jun 05, 2009

SOURCE: Fuse problem in hyundai getz

dear friend -the fuses you describe is cluster fuses and has nothing stopping or starting of the engine.they are joint in a yellow holder.i think you might have a short be hind the fuse box,thats wh you keek on blowing that fuse.

Posted on Jul 21, 2009

  • 1986 Answers

SOURCE: How do I change the 3rd brake light on a 2004

the light housing will either be clipped in and you will need to gently pry on the housing to open it, or you will be able to unscrew the housing through the trunk itself

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 Getz. How do I bleed clutch?


If there isn't a bleed valve on the slave(at the transmission). then you have to pump it up with the pedal. Watch the fluid level. With the bleed valve, pump the pedal and hold it down, release the valve and close it. Keep doing this until fluid only comes out(no air). Again watch the fluid level.

Dec 13, 2015 | Hyundai Cars & Trucks

1 Answer

Daughters 2002 Hyundai Getz is stuck in what i think is second gear.


Worn Clutch plate or thrust plate.

Check if hydraulic Clutch
if so check clutch fliud level . Could be a faulty clutch master cyclinder in hydraulic system.

Jan 15, 2015 | 2002 Hyundai Getz

1 Answer

Torque settings on hyundai getz 1.6 Top and cam


The info is said to be available here, if the link still works. You may have to register yourself first.

http://www.hyundai-forums.com/attachments/getz-forum/57970d1353332110-help-hyundai-getz-1-6-torque-settings-getz-1.5-1.6-specs-torque-settings.pdf

Dec 20, 2013 | Cars & Trucks

1 Answer

Vibration between 20-25 in 3rd gear and 28-32mph in 4th gear


did you replace the clutch plate as well as the clutch ? as not doing so it can be warped from the heat of old one burning out. also did you check the flywheel as any imperfections in the plate can cause clutch wobble.

Jul 21, 2017 | 2005 Hyundai Getz 1.3

1 Answer

Hyundai Getz catalytic converter problems


i want buy used cataytic converter how much hyundai getz 1.3 2004 year

Dec 12, 2012 | 2006 Hyundai Getz

Not finding what you are looking for?
2005 Hyundai Getz 1.6 Logo

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...