Question about 1998 Plymouth Breeze

Open Question

How to change the 99 Plymouth breeze shift solenoid

How do you change out a shift solenoid on a 99 plymouth breeze 2.0 L

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

PyroPCMan
  • 405 Answers

SOURCE: how do you change a head gasket on a 97 plymouth breeze with a 2.0 litre engine ?

Follow this link for a step by step with pictures:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800896af

Just an FYI head gaskets require alot of time and care to replace.

Good Luck Hope this helps

Posted on Jun 30, 2008

  • 2 Answers

SOURCE: plymouth breeze

its behind the drivers side wheel well. look by your front left tire in front of it and you should see some butterfly nuts. its a weird spot for a battry lol i know, i have the same car

Posted on Dec 15, 2008

blueextc3221
  • 15935 Answers

SOURCE: How to change the serpentine belt on '98 Plymouth Breeze?

All you need is a long prubar (or you can rent a tensioner wrench at the parts store) essentially a open end wrench with a 3 ft handle.
Put the tensioner wrench on the nub of the tensioner and pull back... this will release the tension on the old belt. Remove it from one of the pulleys, and then from the entire system.
Note how it is routed through the pulleys, and put the new one on the same way.
The car should have a sticker on the radiator support telling you the path of the belt.

Posted on Jan 08, 2009

  • 599 Answers

SOURCE: Shift Solenoid c Where and how to replace in A 99

the c solenoid is located in the transmission,valve body you have to drop the transmission pan and locate the solenoid, this is a job best suited to a transmission shop,or some one with a lift.

Posted on Apr 15, 2009

  • 202 Answers

SOURCE: how to replace front springs and struts on 99

you need to have a professional do this. if you remove the nut on top of the strut without a spring compressor tool the spring could kill you!

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 plymouth breeze transmission wont go into 2nd Gear


Have you check fluid level ? Is your check engine light on ? You have a bad shift solenoid inside the transmission ,more then likely . Have codes checked ,you mite have P0700 + code
  • P0750 - Shift Solenoid A
  • P0751 - Shift Solenoid A Performance or Stuck Off
  • P0752 - Shift Solenoid A Stuck On
  • P0753 - Shift Solenoid A Electrical
  • P0754 - 1-2 Shift Solenoid Intermittent
  • P0755 - Shift Solenoid B
  • P0756 - Shift Solenoid B Performance or Stuck Off
  • P0757 - Shift Solenoid B Stuck On
  • P0758 - Shift Solenoid B Electrical
  • P0761 - Shift Solenoid C Performance or Stuck Off
  • Nov 08, 2015 | Plymouth Cars & Trucks

    1 Answer

    99 Plymouth breeze won't start


    what is the other posible reason a 99 plymouth breeze wont start it rolls over well i change the crank sensor,camshft sensor,ignation coil but won't start

    Dec 28, 2012 | 1999 Plymouth Breeze

    1 Answer

    What's labor time to change fuel pump on 99 breeze


    about an hour if its in the fuel tank with access through the back seat .

    Apr 14, 2012 | 1999 Plymouth Breeze

    1 Answer

    How do I change the starter on a 1999 Plymouth Breeze with a 2.0L engine?


    most starters have only two mounting bolts,i recommend disconnecting your negative battery terminal,remove the mounting bolts diconnect the solenoid wires

    Jun 21, 2010 | 1999 Plymouth Breeze

    1 Answer

    I have a 99 plymouth breeze. My friend was


    You may need to install shims between the starter.

    Jun 21, 2010 | 1999 Plymouth Breeze

    1 Answer

    Stupid question, is there a trick to changing the headlight in a 99 plymouth breeze? I can't pull it out and it is really hard to get at.


    You are aware you don't change the lens, right?
    All you change these days, is the little halogen insert, which goes in from the back side, away from the lens. Right where the wires plug on, you remove the wires, and I beleive rotate a ring, and the small bulb comes right out. You reach it from inside the engine compartment.

    Feb 10, 2010 | 1999 Plymouth Breeze

    1 Answer

    Shift Solenoid c Where and how to replace in A 99 plymouth Voyager


    the c solenoid is located in the transmission,valve body you have to drop the transmission pan and locate the solenoid, this is a job best suited to a transmission shop,or some one with a lift.

    Apr 15, 2009 | 1999 Plymouth Voyager

    1 Answer

    Changed tranny in 99 plymouth breeze


    probably the neutral safety switch ,and reverse light switch ,

    Dec 08, 2008 | 1999 Plymouth Breeze

    Not finding what you are looking for?
    1998 Plymouth Breeze Logo

    Related Topics:

    53 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Plymouth Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7768 Answers

    Are you a Plymouth Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...