Question about Cars & Trucks

1 Answer

Is clifford alarms been the cause of radios to ground out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

Only way to find out is to remove the radio and see if the alarm wiring has been connected to any of the radio's harness , ie the power , ign power , earth , no other connections would be of any use but if there are other wired connections to the original harness check where they go to

Posted on Jun 28, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GTI. How can I get my Clifford alarm to operate the central locking?


My best advice is to contact clifford direct and explain your problem normally very helpful.

Mar 02, 2016 | Seat Ibiza Cars & Trucks

1 Answer

Key immobiliser ignition switch


Most audio mobile mechanics are trained in installing alarms as well as other things on cars part and present. It would be worth finding one and enquiring about your alarm. When you phoned Clifford I am guessing that you spoke to the receptionist and they just looked it up on their computer as the model is not stocked they probably won't help as it most likely wouldn't of had any warranty anyway. I had a 97 corolla and it had a stock alarm on it and it was good. Good luck anyway. If you are not confident enough don't touch as electrics are tricky on cars specially when taking advice that is noteface to face at the problem.

Sep 14, 2013 | 1997 Toyota Corolla

2 Answers

I replaced a factory cd player and now when i start car my alarm goes off and my remote dosnt work


Unplug your batteries negative terminal and let it sit for 30 minutes.

After 30 minutes, reinstall the battery cable and see if the security system is reset. A lot of times when removing the radio, the blue security wire comes undone and does not have a place to be plugged back in to the radio, causing the alarm to sound.

Make sure you install all of the wires in your radio. If you have stray wires, this is likely your culprit and will have caused your system to falter. Try grounding the loose wires as a precaution.

Hope this helped!

Jun 17, 2011 | 2000 Cadillac Eldorado

1 Answer

My clifford concept 400 car alarm isn't working on my 96 acura integra. With the key on the radio and power antennae will work. The headlights come on but the dash clock does not nor do the wipers or power...


are you sure its the alarm? and do you have the red key for the car? hondas have a immobilizer and they quite often lose the code by themselfs hence you need the red key to reprogram it. If you dont have it then it may be quite expensive.

If you have the key to disable the alarm I would try that first, small key on the side of the alarm box turn to off and try it again.

Hope this helps

Jan 15, 2010 | Acura Integra Cars & Trucks

2 Answers

I need help to reset the car alarm. There is no keyless remote. It's a clifford alrm. It started fine then when i turn the car off the alarm light was blinking and now i can't start the car


Look under the dash for a little button that youll push to bypass the alarm. If not one you will need to disconnect the alarm sysem and remove it. It is useless to you anyway without the key pad

Jul 31, 2009 | 1994 Pontiac Bonneville

1 Answer

Clifford immobiliser unlocks doors, does not start car


Find where your fuel pump relay is and check for power there. Most alarm tech's and alarm system dis engages the fuel pump at there relay's.

Simple things to check is the fuse first then go for the relay and if everything there is working properly, it could be your alarm may have gone bad or your fuel pump it self.

Good luck and hope this helps

Apr 13, 2009 | 1996 Audi A4

1 Answer

2004 toyota corolla tach wire


you can also solder the wire to the tach wire, this way it won't come off and cause a malfunction

Jul 03, 2008 | 2004 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...