Question about 2002 Dodge Ram 3500 Truck

1 Answer

No power to fuel except when turning over

I only get power to my fuel pum when I turn it over to start it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If it is a G.M. product from around 2000 +/- then it is a security feature that shuts of the fuel pump when a electrical spike is registered in the system.....if you leave it for about 20 minutes it will start up and run normaly, if it keeps occuring then you will have to take it in to a dealer to have this feature disabled '04 vette and 2000 suburban both went through this...

Posted on Jun 11, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: 1996 pontiac grand am will not start turns over

THE 93 97 GRAN AMS ARE BAD ABOUT THE PASS LOCK SENSORS GOING BAD, CHECK YOUR LOCAL DEALER BECAUSE IN SOME CASES THEY ARE COVERED UNDER A CALL BACK.. IF YOUR GETTING FUEL, AND SPARK I BET THIS WILL HELP YOU.. IF ANY QUESTION CONTACT ME AT keith.glass765@yahoo.com THANKS AND GOOD LUCK..KEITH..

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it start and run, then dies?


Keep ur ear out . If it first turn the key on you'll ear the pum on tank going. If it keeps on then is plug . Another way to chek it is on the fuel injectors line. It looks like tire valve . Slowly press on fuel should came out. If not is the fuel pump. Be careful if u check x pressure keep ur face out of the way.

Jun 24, 2015 | 2006 Dodge Ram Pickup 3500

1 Answer

How to bypass immoblizer and theft system on 2000 isuzi rodeo


Have you verified the timing belt isn't broken? It's getting fuel?
Have you recently purchased a new ignition key, or did the battery go dead on your fob? Could be fuel pump, or even a fuse.
Start the cheapest....Check all fuses, under the dash and the hood. Listen for the fuel pum to buzz when key is turned on.

Aug 06, 2014 | 2000 Isuzu Rodeo

1 Answer

Car was running, parked it on slight grade, went to start will not turn over,


First, will engine turn over..If not check battery ground, make sure you got a good ground, then check to see if power is going to lights, dome light and dash lights...If not battery could be bad, if battery is OK then check starter...let me know what you find.....

Mar 22, 2014 | 1993 Chevrolet Cavalier

1 Answer

I believe the fuel pump went out in my truck but before I go and repair that is there a fuel pump relay switch that I can check before replacing my fuel pum?


turn the key on without starting thye engine
you should hear tye fuel pump run for 5 seconds
if not replace the oil pressure switch on the engine
If heard replace the fuel pump relay

May 15, 2011 | 1999 Dodge Durango

1 Answer

No power to fuel pump - 2000 Chev Silverado 2500 series???


Whe you turn the key to the on position you should hear the fuel pump working for about 5 seconds. If not replace the engines oil pressure switch for the fuel pump is linked to this part. Once the engine reaches normal operating oil pressure the computer shuts the circuit off to the third wire from the oil pressure switch which is linked to the fuel pum feed and the computer then turns on the fuel pump relay to operate the pump

Apr 20, 2010 | 2000 Chevrolet 2500

1 Answer

My truck turns over, but wont start unless I spray starter fulid. What could be the problem?


Could be blocked fuel filter or fuel pum, does it keep running once you stop spraying the starter fluid, Try also cleaning out the throttle that could be restricting the mix.

Jul 10, 2009 | 1996 Oldsmobile Bravada

1 Answer

1988 ford f-350 econooline cube van not getting power to fuel pum


The fuel pump relay switch is located on the firewall, behind a plastic cover. It is a black plastic 1 inch by 1 inch switch with a four or five wire plug. It is designed to operate the fuel pump for 3 to 8 seconds when you turn the ignition switch on to prime the injector rail hope u find it

Feb 16, 2009 | Oldsmobile Intrigue Cars & Trucks

1 Answer

No power to fuel pump. I have power up to the circuit opening relay.


I am not positive how the electronics are routed on a later model truck but I had this same problem on my 89' with a 22re. It turned out that the oil pressure sending unit was in the fuel pump circuit so as to not allow the engine to start with no oil pressure. I changed my sending unit and the truck fired right off. Hope this helps.

Aug 02, 2008 | 2000 Toyota Tacoma PreRunner

Not finding what you are looking for?
Cars & Trucks Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...