Question about 2007 Mazda CX-7 Grand Touring
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Depressurize and drain the cooling system.
2. Loosen the alterantor adjustment and remove the belt.
3. Remove the water pump pulley.
4. Remove all the timing belt covers.
5. Loosen the timing (camshaft) belt tensioner and slip the timing belt off the camshaft toothed pulley (ensure you do not move the positon of the camshaft)
6. Unbolt the lower radiator hose fitting and heater retrun pipe.
7. Unbolt the waterpump from the block (5 bolts).
8. Remove all traces of the old gasket before mounting the new pump (Permatex spray on gasket remover works well).
9. Install the new pump and reassemble in reverse order to above.
Posted on Jul 31, 2009
you need to take it to your local dealer and raise a big fuss because this is a known problem and if you yell loud enough you should be able to get this fixed under warranty.
Posted on Aug 12, 2009
un plug the cable socket at the back side of the headlight then remove the rubber cover at the same place and then there is a steel wire clip carefully remove it (as you have to put it back again) the lamp can be removed easily you have to put the new one in the same direction again so remember what you remove
Posted on Jan 20, 2011
SOURCE: I have replaced the timing
There are no timing marks, special tools are needed. The Mazda dealer should have been the only one to work on it. Mechanics never want to work on "Basket Cases" because of the time involved in the job. It turns a good job into a money loser. See if the dealer will at least set the timing marks for you, and you can do the rest without any liability to them. No one wants to do a job like that and then the customer wants a guarantee that there are no problems. The timing chain alone is a 5-6 hour job.
Posted on Sep 08, 2011
Tips for a great answer:
Dec 15, 2016 | Mazda Cars & Trucks
Oct 25, 2016 | Mazda Cars & Trucks
Jul 18, 2015 | Mazda Cars & Trucks
Feb 01, 2015 | 2010 Mazda CX-7
Nov 02, 2012 | Cars & Trucks
Sep 08, 2011 | 2007 Mazda CX-7 Grand Touring
Jun 07, 2011 | Mazda CX-7 Cars & Trucks
Aug 03, 2009 | 2007 Mazda CX-7 Grand Touring
71 people viewed this question
Usually answered in minutes!