Question about 1985 Chevrolet Sportvan G30

1 Answer

1985 chevrolet G30 chevy van Winnebago Minnie Winnie

How do you put transmission oil in

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,057 Answers

Locate the dipstick tube to check the trans oil and remove the dip stick and put the oil down the tube. Replace the dip stick and check the level when you think you have enough in the tranny. Hope this helps.

Posted on Apr 10, 2017


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1010 Answers

SOURCE: 1982 G30 Chevy Van power steering fluid

Find the power steering pump. The fluid goes in the top of the pump. Look for a twist off cap that has a measuring stick attached to the under side, when you take it off. Make sure you use the correct type of fuild for YOUR kind of vehicle. There are diffrent types for different makes of vehicles. Don't OVERFILL the pump.

Posted on May 15, 2008

  • 6982 Answers

SOURCE: 1995 chevy g30 van

If vehicle was left outside or in an unheated garage, there is a strong possibility that condensation has contaminated your fuel. Easiest way to check is to remove fuel filter and pour contents into a glass jar. If you see two different layers of liquid in the jar, the bottom part is water. Replace with new filter and drop the tank. Remove sending unit. pour contents into a large container and clean out inside with clean dry rags. Remember, fuel is dangerous to work with and fumes travel pretty far on the ground. So, no open flames electrical stuff, cigarettes etc for a good perimeter around work area. Generally, you can re-use top 3/4 of fuel you removed by syphon. Don't use remainder in your vehicle. Part can be used for lawnmower etc as long as you only take the part above the water line.

Posted on Mar 13, 2009

  • 770 Answers

SOURCE: we just bought an 85 Minnie Winnie RV with a Chevy

It doesn't sound like hot water is circulating thru the heater core. That model should have a valve on the intake hose that goes thru the firewall. Check to see that the cable is connected and the valve is working. If it is working properly, the hose should become hot on the heater core side of the valve.

Posted on Oct 07, 2009

  • 2 Answers

SOURCE: Where can I find a fuse panel diagram for my G30 van (1995)

email me I will send you a link for the complete manual

Posted on Jul 24, 2010

  • 1 Answer

SOURCE: i have a 1986 Winnebago Minnie Winnie on a Chevy

had the same problem on my 79 G30. Taced it down to the fuel tank was traping the rubber hose on the sender unit on the top if the tank .Drop the tank down a few inchers on the strapps and see if that helps.

Posted on Feb 18, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I just bought a 1989 minnie winnie Winnebago with Chevy chassis, there was no generator all wires leading to generator were disconnected. There is no power to the rear cab unless the engine is running. The...

The wires that were hooked to the Generator were also hooked to the aux batteries. you'll have to trace the wires that are disconnected. Also, if you plan on just using your alternator to keep the aux batteries charged, then you need to make sure you have at least a 100 amp alt, If you use the batteries while the van isnt running it takes a big toll on the regular 60amp alt that most of these vans come with. I'd buy another generator and hoo it back in myself.

Oct 29, 2013 | Cars & Trucks

1 Answer

Need Vacuum routing for my 1985 G30 Class C RV it has a 350 with 4 bbl carb

Check this diagrams for 1985 Chevrolet Truck G30 1 ton Van 5.0L 4BL 8cyl (click over pic for zoom)...


Fig. 123: 1985 5.0L and 5.7L engines-Federal with automatic transmission (G10, 20 and 30 models)


Fig. 126: 1985 5.0L and 5.7L engines-California with automatic transmission (G10, 20 and 30 models)

Hope this helps.

Apr 18, 2011 | Chevrolet G30 Cars & Trucks

1 Answer

We just bought an 85 Minnie Winnie RV with a Chevy van front. The heater in the cab does not get warm. The fan works ok and it blows through all the vents, but no heat...

It doesn't sound like hot water is circulating thru the heater core. That model should have a valve on the intake hose that goes thru the firewall. Check to see that the cable is connected and the valve is working. If it is working properly, the hose should become hot on the heater core side of the valve.

Oct 07, 2009 | 1985 Chevrolet Chevy

1 Answer

Surge at idle

buy manual, check and reset tps, you will need cheap ohm meter

Sep 12, 2009 | 1987 Chevrolet G30

2 Answers

1985 5.7L Chevy G30 engine problem

do you shut the propane off before turning on the gas ? try turning the propane off and start the MH on gas .. The mixture of the two is whats causing the problem .. Also you need to run it on gas frequently to keep the carb wet so it wont dry up .. it might be already dried up if you run it on propane alot . might be needin a kit in it.. thanks and holler if you need more Jerry

May 12, 2009 | 1985 Chevrolet Sportvan G30

1 Answer

1995 g30 van. I have replaced everything fuel related. It starts fine but stalls out when I put it in gear.

what about the spark plugs and wires? If so, make sure they are in the proper firing order.

Apr 22, 2009 | 1985 Chevrolet Chevy

2 Answers

Gas in oil

Ok, only two ways the oil can mix with the gas. one is a blown head gaskets. the other would be bad piston rings.

Mar 16, 2009 | 1986 Chevrolet G30

1 Answer

Transmission removal

This is a big complex problem, probably not suited for the small space here. However,

Get a Chilton's book on your year and model. That will have a step by step section to do this.

In general,

Put car up on very sturdy stand or lift. Always have a friend don't do alone. It's got to be high enough to allow the transmission to slide out underneath

On bolt both ends of drive shaft - differential end and transmission end.

Remove Drive shaft set aside.

Use some 4 X 4 and 2 X 4's and block up the engine at the rear.

You will need a transmission hoist - can rent these

Take off speed cable
Take off shifting cable and level mechanisms

Loosen all the transmission bolts from under the hood facing forward on the bell housing.

Put transmssion hoist under transmission and lift slightly.

Undo rest of bolts.

Move tranmission back about three inches

Lower stand

Slide out.

Be very careful - heavy things here, and dont' forget to get the repair book first.

This is only about $1200 fix at a transmission shop - that may be better.

Aug 01, 2008 | 1985 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides