Question about 2000 Mercury Sable

Open Question

I have a check engine light on. It says there is a problem, misfire in cylinder #6. How do i find cylinder #6

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 205 Answers

SOURCE: check engine light on, engine running rough

evaporator is part of the fuel system, missfiring could be spark plug or bad coil

Posted on Mar 26, 2009

Ad
danielson57
  • 108 Answers

SOURCE: 1998 Mercury Grand Marquis. Check Engine light on

is not ford,driverside front close to rad #1,and then2,3,4 [same side]and pass. side front 5,6,7,8 [if only 6cyl you have 123and 456?

Posted on Dec 12, 2009

Testimonial: "thanks"

  • 1949 Answers

SOURCE: 2002 Mercury Cougar 2.5V-6 24 valve is stumbling

try some seafoam to unstick lifters

Posted on Jan 27, 2011

rogeich
  • 57 Answers

SOURCE: check engine light on 0310

Had same problem on a 2000 firebird,changed wires and plugs and coil pacs too.It turned out to be a bad catilistic converter.

Posted on Mar 02, 2011

enyeartricha
  • 61 Answers

SOURCE: 2008 mercury milan misfires

take it back to the dealer they didnt install the coil or electric distubutor properly because of the misfire its causes o2 sensor to give bad reading .

Posted on Apr 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03jeep lbertyrandom missfire cyl 2 4 6check engine light flashing


Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Jeep Liberty Check Engine Light/Misfire Due to Intake Valve Locks/Valves. ...Misfire cyc 4 and random cyc misfires, changed coil packs and plugs... sounds as if rod ... Light came on again (misfire on cylinder 4) - switched coil from 4 to 2. Light ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - #4 misfire new plugs and coil pack on #4 light came back on after 300 miles if ... How come it stopped misfiring for 2-3 months, and now is back? ... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the codes ...

Liberty Cylinder Misfire / Computer issue? - JeepForum.com


Nov 28, 2015 | Cars & Trucks

1 Answer

Jaguar s type 2.5 misfire on all 6 cylinders


A random miss ( code 300 ) means the cylinders are not producing normal power, but may not yet be a dead miss.
Sounds like a fuel problem, which may also be connected to the O2 sensor problem.

Jun 25, 2013 | Cars & Trucks

1 Answer

Missing,viborating


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The vibrating tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2009 Ford F-150

1 Answer

Vehicle missing,shaking,engine light comes on


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The shaking tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2004 Ford F150

1 Answer

CHUGGING ALONG WITH FLASHING CHECK ENGINE LIGHT....???? 2002 FORD WINDSTAR WHERE TO BEGIN


A flashing Check Engine light means you have a ignition Misfire, start by replacing the spark plugs and spark plug wires, one or more is defective. If you have a electronic engine control fault code reader the cylinder or cylinders that are misfiring will set a fault code, the codes are P0300-P0306, the last number being the number of the cylinder ( cylinders 1-6) the computer has detected a misfire in.

Apr 18, 2011 | 2002 Ford Windstar Cargo

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck


P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Jan 02, 2011 | Ford Escape Cars & Trucks

1 Answer

Check engine light flashing and car idling low. 2003 Passat V6 4Motion. Recently replaced the timing belt. Was told this is unrelated. Need to replace Cam Belt for cylinders 4,5, and 6


First things first. The check engine light is blinking because the engine is misfiring to a point that could damage the catalytic converter. If cylinder 4 5 & 6 are all misfiring i would check the engine timing belt for proper installation. These are the cylinders for the left bank of the engine. If the belt has jumped or was installed wrong this would explain the misfires. Unfortunately this is an interference motor which means there is a high probability if the belt is on wrong, the engine valves mat be damaged. I would perform a compression test on those cylinders to verify the belt condition. Hope this helps.

Dec 21, 2010 | 2003 Volkswagen Passat

1 Answer

2002 Ford Ranger check engine light indicating misfire


Code P0301
Ignition Coil Pack
Ignition Cable
Spark plug
Clog or dirty fuel injector
Evap canister purge valve
Engine Compression
fuel pressure

you have 3 type of engine for your truck
2.3L 4 cylinder
3.0L 6 Cylinder
4.0L 6 Cylinder

need to know that type Engine

The reason why the service light come on because it is a hard code
not a soft code.

Let me know

Sep 20, 2009 | 2002 Ford Ranger Regular Cab

Not finding what you are looking for?
2000 Mercury Sable Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...