Question about 1994 Chrysler LeBaron

2 Answers

How do i release the fuelinjector pressure on a 1994 chrysler labaron

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 752 Answers

Hi Ralph, I'm glad to help. There is a service port on the fuel rail, simply take the cap off and take a rag to cover it while you press the schrader valve with a small screw driver to release the pressure. Hope this helps and have an awesome day Ralph!

Posted on Jun 11, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 229 Answers

Along the fuel rail will be what looks like a tire stem
same as on a wheel
remove the cap and use a small nail or screw driver to release the pressure bu pushing the small center stem inward
wear eye protection

Posted on May 31, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1994 crystler labaron alarm system deactivation

I have tried all the solutions for this problem and I still cannot get it to shut off my car alarm system on a 1994 Chrysler Lebasron Convertible GTC? Any other solutions?

Posted on Dec 14, 2009

  • 11 Answers

SOURCE: car in "limp mode" after accident

The speedo sensor tells the car when to shift, sort of. The connector/associated wires/or the sensor itself may be out of whack. Repair or replacement of this part should correct it.

Posted on Dec 29, 2008

  • 68 Answers

SOURCE: how do I get the engine codes on a chrysler

TURN THE IGN.SWICH 3 TIMES ON/ OFF,THE 3 TIME LEAVE IT IN THE ON POS,AND WATCH THE ENGINE LIGHT BLINK...JIM

Posted on Aug 20, 2009

  • 114 Answers

SOURCE: I have a 1995 chrysler labaron convertible can't

If it is truly a factory alarm and not a aftermarket dealer installed one, then you should be able to insert the key into driver door and first lock, and then unlock the car which should disable the system. I am guessing that the key chain remote is either damaged or has a dead battery?
If that does not work you can also try the lock-unlock sequence on the passenger side. There is a sensor switch on the latch inside the door which should reset the alarm.

Posted on Mar 01, 2010

jackandjk
  • 7 Answers

SOURCE: 1984 Chrysler LaBaron fuel recommendation

I have one and with 85 octane it runs horrible. Use ATLEAST 87 or 91 for best preformance. If you have the manual, it also says what I told you.

Posted on Nov 30, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set timing on 1994 chrysler labaron 3.0


the valve springs are pushing against the cam lobes and turning the cam, you have to hold them with special tools or wrenches, usually the will stay in time if you hold them lined up with the marks and release gently on wrench, don't breath or they will jump

25005933-iv5yhqpktypbvunjtpsp2olz-4-0.gif

Aug 25, 2014 | 1994 Chrysler LeBaron

1 Answer

I have a 1994 chrysler labaron what i would like to know is if there is a fuel pump sending unit i know theres a relay but is there also a sending unit


Basically there are several components in the system there is a fuel pump relay a gas gauge sending unit and fuel pump.

May 07, 2014 | 1994 Chrysler LeBaron

1 Answer

I have a 1994 Chrysler labaron i have replaced the fuel pump & filter & the relay but it still blows the fuse


Sounds like a short somewhere in the circuit. If you are able check all wiring coming from the fuel pump for any chafed wires or loose connections check connectors and harnesses for corrosion or loose connection which can cause resistance. also check for any signs of melted or burnt wires or connectors. hope this helps some.

May 06, 2014 | 1994 Chrysler LeBaron

2 Answers

1994 crystler labaron alarm system deactivation


Lock your doors. Then Unlock with the key. Unless you mean complete deactivation

Nov 23, 2009 | 1994 Chrysler LeBaron

1 Answer

How do I get the engine codes on a chrysler labaron 1994?


TURN THE IGN.SWICH 3 TIMES ON/ OFF,THE 3 TIME LEAVE IT IN THE ON POS,AND WATCH THE ENGINE LIGHT BLINK...JIM

Aug 20, 2009 | 1994 Chrysler LeBaron

1 Answer

Car in "limp mode" after accident


The speedo sensor tells the car when to shift, sort of. The connector/associated wires/or the sensor itself may be out of whack. Repair or replacement of this part should correct it.

Dec 28, 2008 | 1994 Chrysler LeBaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...