Question about 2006 Ford F-150
Power steering how many bolts and where are they? can you send a diagram on where the bolts are for me to change the power steering.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1989 Ford F150 power window
you have to disconnect the negative side of the battery so you won't kill it then remove the door panel look for hidden screws behind the arm rest and behind what looks like little doors that you have to use a screw driver to open once that is removed you will find a plastic sheet just cut and peel this back (you can use duct tape to replace it when you are done) also put on gloves because inside the doors there is sharp edges, you then can see the motor and you will need to break off the rivets but you can put the new one on with just a small bolt and nut and use lock tight
Posted on Jan 06, 2009
its quite quite simple;take your pipes of and block them off reconnect them to new pump and replace pump to in line belts.adrian;;;
Posted on Nov 14, 2009
There should be two bolts that hold the caliper to the axle assembly. Remove these two bolts and slide the caliper off. At this point check the rotors for abnormal wear or grooves. Depending on how many miles you have on them I would replace them regardless. Before you insert the new pads into the caliper I like to use a C clamp and a piece of flatstock to force the pistons back to their original location. If you don't do this you will not be able to fit the caliper over the rotor. Before installing the caliper if you did buy the new rotors use some brake cleaner to remove any of the cosmoline oil that they are shipped with. Remember to chock your front wheels or use jackstands if you have enough. Good luck!
Posted on Feb 13, 2010
In the owners manual.
If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
Posted on Feb 24, 2010
Tips for a great answer:
Feb 17, 2015 | 2002 Ford F150 Regular Cab
Mar 19, 2013 | 2006 Ford F-150
Sep 19, 2012 | 2006 Ford F-150
Oct 18, 2011 | 1997 Ford F150 Regular Cab
Dec 19, 2010 | 2006 Ford F-150
Follow this steps
The items you will need include basic hand tools, shop rags, gloves, drip pan, fluid suction gun, power steering pump pulley removal tool, power steering pump pulley installation tool, power steering fluid, and a Haynes manual.
Use a suction gun to remove the power steering fluid.
Position a drip pan under the pump and disconnect the high pressure line and fluid return hose. Cap the ends of the lines.
Loosen the serpentine belt and slip it out of the power steering pump pulley. Replace any worn belts at this time.
Remove the bolts and nuts that hold the pump onto the engine.
Remove the pump. Now remove the pulley from the pump. To do this, use a power steering pump pulley removal tool. If you don't have one, you can rent one from Advance Auto Parts.
Remove the nuts to detach the pump from the brackets.
Reattach the bracket to the new pump. Reinstall the pulley.
Bolt the pump back into place. Slip the belt back onto the pulley and retighten. Reattach the high pressure line and return fluid hose.
Now fill the power steering fluid reservoir until it reaches to the proper level. Now start the vehicle. Recheck the fluid and add if necessary. Turn the wheels left and right a couple of times. So that's it, you are done. Test the vehicle to make sure it functions properly.
Aug 27, 2010 | 2004 Ford F150
Apr 26, 2010 | 1992 Ford F150 SuperCab
16 people viewed this question
Usually answered in minutes!