Question about 2000 Dodge Durango
Location of automatic transmission solenoid for a dodge durango 2000
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I've been having this problem with this car for a while.This is the third time which I needed to change the damn solenoid in 3 years.You need to take the whole air filter off,you have in the front two screws,and two more just to loose the clamps.You need to pull the whole thing out,once you take it out,you should be able to see it under two black hoses,it has 3 screws into it,it's very easy to take off and replace,about 2 hours total.No more domestic cars for me for as long as I live!Good luck!
Posted on Jan 20, 2009
if i am not mistaken the fuel filter is built into the fuel pump. which requires you to drop the tank and replace both.
Posted on Jun 01, 2009
i have been in the transmission buisness for 20 yrs in colorado and we charged 225 parts and 150 labor to repair this
Posted on Aug 15, 2009
Testimonial: "Thanks for the confirmation on the cost. Most want the cra brought in to diagnose which my schedule doesn't permit. Cost matches the quote. Thanks"
I have a 2000 dodge durango 4x4 The transmission works good most of the time but some times it will take off in high gear if i pull the lever down it will go down a gear but if i stop and shut the key off and re start it will work good again some times for a long while and some times for a short while. I just took a 400 mile trip no problem it has been doing it for a long time off and on i have serviced it once a year and have had it since it had 15th miles and it has 200th miles now fluid is clean .I tried another TCM with no luck Thank you Jeff
Posted on Dec 02, 2009
USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS
Posted on Dec 30, 2009
Tips for a great answer:
Mar 26, 2018 | Dodge Durango Cars & Trucks
Jun 16, 2011 | 2000 Dodge Durango
May 13, 2011 | 2000 Dodge Durango
Nov 30, 2010 | 2000 Dodge Durango
Dec 30, 2009 | 2000 Dodge Caravan
Nov 09, 2009 | 2000 Dodge Durango
Mar 26, 2009 | 2000 Dodge Durango
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: