Question about 2003 Toyota Camry
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Where is blower motor resistor
The BLOWER motor resistor on a Toyota Camry 01.
Is located Behind center right side of dash.
ON blower housing.
If you vehicle is equipaded with protection cover.
Just you need to remove the cover. and will see the blower resistor.
I hope this information work for you.
Thank you for use fixya.
Posted on Jul 21, 2008
SOURCE: Heater Blower Motor
Remove the glovebox door, and the under dash cover/trim panel.
Look behind where the glove box was, you will see the heater box
At the bottom of this box, there is a round plate with a wiring connector and 3 screws holding this plate to the heater box.
This plate is the bottom of the heater fan assembly; remove the connector, and the 3 screws. The fan motor will drop staright down. Real easy to do.
Posted on Oct 21, 2008
I had the same problem on my 2004 Corrolla and ultimately it only worked on high. The dealer charged me $45 diagnostic fee and almost immediately told me it was a part called the blower resister. They knew the answer right there and then but only realesed it when I agreed to pay the diagnostic. They charged me 179.00 to fix the AC and later I found out the part cost $8.95 and a novice could have replaced it themselves.
Posted on May 04, 2009
some one directed me to autozone.com where i found what i was looking for. it is free once you register your car information. thank you so much.
Posted on May 19, 2009
if youre sure that its the blower motor.......then HANG ON......cuz HERE WE GO!!!! k....open the passenger front door....get on your knees.....and look BELOOOWW the glovebox...there should be a black plastic cover...more than likely...that ya have to remove....after that....you can see your blower motor...should have three screws...maybe one more....and it will be released from the evap box....you then have an electrical pigtail connector you have to release and VIOLA!!!!!! there's your blower motor in your hands......install is opposite of reverse.....yeah I know that your knees hurt right now.....but...HOPE I HELPED!!!!!
Posted on Nov 14, 2009
Tips for a great answer:
Jul 04, 2016 | Toyota Cars & Trucks
on May 25, 2011 | Chevrolet TrailBlazer Cars & Trucks
Nov 25, 2015 | 1997 Ford Expedition
Jul 27, 2015 | 2003 Dodge Ram Pickup 1500
Jun 05, 2014 | 2003 Toyota Corolla
Oct 09, 2011 | 1999 Toyota Camry
Mar 07, 2011 | 1986 Toyota Camry
Mar 18, 2009 | 1991 Toyota Camry
Nov 11, 2008 | 2003 Toyota Camry
71 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: