Code p2089 dodge sprinter 2007
DTC P2089 A - Camshaft Pos Actuator Ctrl Circ Hi Bank1
On this code the cam or crank sensor is normally the culprit. I would replace the crankshaft position sensor. There is anothe possible sensor that can cause this to happen vehicle speed sensor and engine coolant temp sensor. The way it works is The ECM receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in low/mid speed range and output in high-speed range. But the most common problem is the cam or crank sensor Start with the crankshaft sensor and then camshaft sensor.
Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Feb 03, 2012 |
2007 Dodge Sprinter