Question about 1994 Ford Escort

Open Question

How are the plastic cowl pieces removed from a 94 Ford Escort LX?

The heater blower motor filled with water because the drain holes under the cowl are clogged, and water backed up into the fresh air intake. I need to remove the cowl pieces to unclog the drain holes. Thank you!

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: after a recent rain the

The drain is a runoff from the outside wiper grill, the open area under neath the wiper grill is for outside air to suct in from your a/c blower. The only way to repair it is to the body shop this will take alot of $$$$$$$$. but for me I'll take a rubber glue tube, cut a piece of rubber inter tube and apply the glue patch it from the inside............where the water is coming in. This work for about 5 years now since I live in the pacific rim, rust is very but here.......good luck

Posted on Mar 14, 2011

Testimonial: "Thank you for your help and time."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove blower fan1988escort


Ford Escort Heater AC Blower Motor Removal - YouTube

? 4:49
https://www.youtube.com/watch?v=oAWn-ybZJUs
Aug 28, 2013 - Uploaded by richpin06a
Ford Escort Heater AC Blower Motor Removal. ... How To Fix Install AC Heater Fan Blower Motor 1991-03 ...

Nov 01, 2015 | 1988 Ford Escort EXP

1 Answer

Replace/repair the heater blower motor


the blower is under the hood . two thumb screws hold a plate in under the screen just behind the engine. top access is needed remove grills and leaf traps 5 philip screws . unclip trim . disconnect power block .4 retaining screws hold motor . unclip cowling .
the shaft bearings can cease and the shaft wears a oversized hole . The fan assembly touches the cowling ,noise and fuse blowing result.

Mar 23, 2014 | 1993 Mercedes-Benz E-Class

1 Answer

Water on passanger side comin in, when going through a high pressure carwash! So had to change the Blower motor resistor because or the water pourring in! Is there a hole beneath the wiper motor


Hello. Welcome to FixYa. Please allow me to help out here.

Yes, there is a hole under the wiper motor. This is where the heater/defroster gets fresh air from.

If you are getting water in the heater box, the drains that keep the water from backing up, and entering the hole, are blocked. You will need to have the cowl panle removed, and any debris under the cowl removed and cleaned out.

Oct 04, 2011 | 2000 Toyota Camry

1 Answer

After a recent rain the passenger side floor of my 1997 ford escort is wet. it seems to have come from the heating/cooling area under the dash. are there drain holes under the hood (cowl area) where the...


The drain is a runoff from the outside wiper grill, the open area under neath the wiper grill is for outside air to suct in from your a/c blower. The only way to repair it is to the body shop this will take alot of $$$$$$$$. but for me I'll take a rubber glue tube, cut a piece of rubber inter tube and apply the glue patch it from the inside............where the water is coming in. This work for about 5 years now since I live in the pacific rim, rust is very but here.......good luck

Mar 12, 2011 | 1999 Ford Escort

1 Answer

Replacing heater fan please advise access to fan motor


the heater blower motor is located under the dash on the passengers side,there's a single plug with two wires that you have to disconnect then there is three bolts to remove and then remove the blower motor, sometimes there a plastic (or carpeted)cover you have to remove first under the dash to gain access to the blower motor .

Dec 30, 2010 | 1999 Ford Escort

1 Answer

Need to change heater coil need a diagram to do so


  1. Drain the coolant. Refer to Draining and Filling Cooling System .
  2. Remove the instrument panel storage compartment.
  3. Disconnect the electrical connectors, as necessary.
  4. Remove the center floor air distribution duct.
  5. Remove the hinge pillar trim panels.
  6. Remove the blower motor cover.
  7. Remove the blower motor.
  8. Remove the steering column.
  9. Roll back the instrument panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
  10. Remove the coolant recovery reservoir.
  11. Remove the heater hoses.
  12. While holding the heater case to the cowl, remove the screw on the interior side of the cowl, near the evaporator pipe, if equipped.
    1. On the engine side of the cowl, remove the 4 screws that hold the heater case to the cowl.
    2. On the engine side of the cowl, remove the 2 nuts that hold the heater case to the cowl.
    3. Remove the heater case. Ask an assistant for help, if necessary.
    4. Remove the 7 screws that hold the heater cover to the heater case.
    5. Remove the heater cover.
    6. Remove the heater core from the retainer.
    7. Installing
      1. Install the heater core into the retainer.
      2. Install the 7 screws that hold the heater cover to the heater case. Replace the seals.
      3. Install the heater cover. Verify that the heater cover is properly sealed.
      4. Install the heater case. If necessary, ask an assistant for help.
      5. On the engine side of the cowl, install the nuts that hold the heater case to the cowl.
      6. On the engine side of the cowl, install the 4 screws that hold the heater case to the cowl.
        1. On the interior side of the cowl, install the screw.
        NOTE : Refer to Fastener Notice in Cautions and Notices.

        1. Tighten the following fasteners:
        Tighten
        • Tighten the screws on the engine side of the cowl to 1.9 N.m (17 lb in) .
        • Tighten the two nuts to 2.8 N.m (25 lb in) .
        • Tighten the screw on the interior side of the cowl to 11 N.m (97 lb in) .
        1. Install the heater hoses.
        2. Install the coolant recovery reservoir.
        3. Roll forward the instrument panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
        4. Install the steering column.
        5. Install the blower motor.
        6. Install the blower motor cover.
        7. Install the hinge pillar trim panels.
        8. Install the center floor air distribution duct.
        9. Connect the electrical connectors, as necessary.
        10. Install the instrument panel storage compartment.
        11. Add the engine coolant. Refer to Draining and Filling Cooling System
        12. Inspect the system for leaks.
        13. bonedivers_0.gifbonedivers_1.gifbonedivers_2.gifbonedivers_3.gif

Dec 15, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

How to remove the blower motor from a 1978 ford bronco full size truck?


Deluxe Hi-Lo Heater
  1. Disconnect the battery cable, remove the carburetor air cleaner and partially drain the coolant system.
  2. Remove the heater hoses from the heater core.
  3. Remove the glove box liner and remove the register duct by pulling from the instrument panel register and releasing the clip at the plenum.
  4. Disconnect the right cowl outside air inlet vacuum hose from the outside/recirculating door vacuum motor.
  5. Remove the rear housing from under the instrument panel. Remove the outside air inlet duct from the rear housing (4 nuts and 1 bolt) and install one upper nut to retain heater housing-to-dash after rear housing is removed.
  6. Remove two screws retaining plenum-to-dash (above transmission tunnel) and two screws to heater housing and remove the plenum.
  7. Install a piece of protective tape on A-pillar inner cowl panel, at lower right corner of instrument panel.
  8. Remove the lower right instrument panel-to-A-pillar bolt to hold the panel in the rearward position.
  9. Remove the heater core (3 screws retaining 2 plates).
  10. Remove the temperature blend door (snaps off).
  11. Remove the temperature blend door arm support (2 screws) and pivot arm retainer (1 screw).
  12. Remove blower motor (2 screws) and remove blower wheel.

To install:
  1. Transfer blower to blower motor and panel assembly.
  2. Install door arm pivot retainer (1 screw) and door arm support (2 screws).
  3. Install the temperature blend door (snaps on).
  4. Install heater core.
  5. Install the plenum (4 screws).
  6. Connect blower wires.
  7. Remove heater housing upper retaining nut and install the heater outlet (4 nuts and 1 bolt). Position the air inlet duct.
  8. Connect the white vacuum hose to the outside/recirculating door vacuum motor.
  9. Reposition the instrument panel, install the retaining bolts and remove the protective tape at the A-pillar inner cowl panel, lower right corner of instrument panel.
  10. Install the right register duct assembly and install the glove box liner.
  11. Connect heater hoses to the heater core assembly.
  12. Fill cooling system, install the air cleaner and connect the battery cable to the battery.
  13. Check blower motor operation.

Jan 19, 2010 | 1981 Ford Bronco

2 Answers

In the past I have had major water leaks in my 2005 grand prix. I never knew wehre the water came from. Now, I can hear water under my car shifting whenever I turn a corner. Where is it coming from??


Do you have a sun roof? I imagine you do.

Under the roof cover there is a tube on each side of the car that drains the sunroof area to the ground. Either a tube has been disconnected or come loose. This will cause severe mold and mildew problems if not fixed soon.

Jun 06, 2009 | 2005 Pontiac Grand Prix

2 Answers

Heater blower


your blower resistor is bad

Apr 21, 2009 | 2001 Dodge Durango

1 Answer

Water leaking in blower motor


pull the plastic grate cover off the cowl at heater AC outside air intake at the base of the windshield and check to see that the cowl drains are not plugged with leafs or other debris, this is the common cause, if the drains are clear seal around the cowl air intake with automotive silicone caulking.

Apr 01, 2009 | 1996 Chevrolet Suburban

Not finding what you are looking for?
1994 Ford Escort Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...