Question about 2005 Pontiac Montana

Open Question

LOCATION OF EGR VALVE FOR 2005 MONTANA - 2005 Pontiac Montana

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 35 Answers

SOURCE: how do you clean the egr valve on 99 pontiac montana

You would need to remove it and look into the passage that is covered in black soot. there is usually a little poppet that moves up and down to allow the exhaust gas to pass thru it, some are vacuum operated and some are electric. you can push the poppet open and scrape out the carbon with a little screw driver, generally they dont get all that pluged up on newer cars. I looked at a picture of yours at auto zone.com It appears yours is electrically actuated. If either the electric actuator or the position feedback in the valve are bad you would need to replace it. You could attempt to clean it and move the poppet up and down it could just be stuck

Posted on Jun 21, 2009

Ad
  • 110 Answers

SOURCE: Where on the 2000 Pontiac Montana is the EGR valve

Its located between the throttle body and the firewall. It bolts onto the upper intake.

Posted on Mar 28, 2011

Hobbit_who
  • 2044 Answers

SOURCE: HOW TO CLEAN ALL OF EGR system ON 2005 PONTIAC MONTANA

Remove it, Use Carb Cleaner to get rid of the Build up

Posted on Apr 12, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air flow intake sensor location


It may but there are other sensors that will affect the idle performance.. Run fault codes first. Check the condition of the PCV valve and the EGR valve.

Feb 02, 2014 | 2006 Pontiac Montana SV6

1 Answer

Egr valve location for a 2005 chevy silverado 4.3 litre v6


Hi Jim, The Exhaust Gas Recycle valve is usually mounted on a tappet cover and is connected to the the intake manifold. It has the function of recycling the fumes from the sump and burning them in the combustion chamber. Regards John

Dec 29, 2013 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

Location of EGR valve 2005 Kia Rio 1.6 L


most egr valves are located @ intake manifold, atop the engine, beside the throttlebody, find one on line at a parts store so you know what you looking for, sound good

Jan 15, 2013 | 2005 Kia Rio

1 Answer

Code P0402, on 2005 Freestyle. Where is the valve


I assume (based on the code) that you are referring to the egr valve. Here is a picture showing an EGR valve (not from the freestyle):http://i133.photobucket.com/albums/q48/tommyliuca/egr%20valve/1-1.jpg

The freestyles looked similar and is in a similar location. Looking at the engine from the front of the car, the EGR valve is to the right of the engine and a little further back (closer to the driver).

Let me know if you can find it, or if you need a picture of the freestyle's (I own a 2005 freestyle).

Jan 25, 2010 | 2005 Ford Freestyle

2 Answers

Egr valve location on dodge ram 2005 4.7


The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

f0255cf.jpg

  1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Disconnect the vacuum line from the air cleaner assembly.
  3. Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Remove both the air cleaner hosing lid and base.
  5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
I hope help you with this. Good luck.

Sep 07, 2009 | 2005 Dodge Ram 1500

2 Answers

Removing and cleaning egr valve


There is one bolt that holds the egr tube to it and two bolts that hold it to the intake manifold take them out, unplug the electrical connector and its off.  Once the EGR is off, Spray it clean with Carb cleaner and make sure that there are no moving parts are binding and re-install. If needed replace the old gasket with a new one. Good luck and hope this helps and if your not sure where the EGR valve is, it's just behind the throttle body. Good luck and hope this helps. 

Jul 03, 2009 | 1999 Pontiac Montana

1 Answer

Egr valve gone


go to this link:

http://www.lxforums.com/board/showthread.php?t=123850

Once there, scroll down about halfway to see a detailed diagram.

Jun 07, 2009 | 2005 Chrysler 300

1 Answer

EGR Location


On the left side at the rear of the engine, and it isn't fun to change.

May 29, 2009 | 2005 Jeep Liberty

1 Answer

Location of EGR valve on 2005 Dodge Durango


If I had been him, I would have talked you into a Chilton or Haynes manual for your car. They are easily detailed enough to show you the location and  Iwould be surprised if a chain operation like AZ didn't have the right one on hand.

Dec 10, 2008 | 2005 Dodge Durango

Not finding what you are looking for?
2005 Pontiac Montana Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...