Question about 1999 Buick Regal

2 Answers

How do i fix po-443 1998 ford f-150 ?

Thats the dtc that showed up!

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 3,679 Answers

This refers to the EVAP system which allows fumes from the fuel tank to enter the inlet manifold so the fumes do enter the atmosphere , this is operated via a solenoid valve that is controlled by the ECU this needs a diagnostic device to check the function/fault, i would doubt that a home mechanic would have the nessesary equipment so i would advise taking to a repair shop that has such diagnostic services

Posted on May 08, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 121 Answers

.may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: http://www.xcardiag.com/

Posted on May 08, 2014

  • Mike White
    Mike White May 08, 2014

    .may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: http://www.xcardiag.com/

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

hasonali1980
  • 71 Answers

SOURCE: how do i fix dtc po-443

http://www.fixya.com/cars/t8438430-engine_light_all_levels

Posted on May 08, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 ford f-150 the inst. panel says right rear doir open when it isn't. Lights stay on. How can i fix this problem?


Have body control system checked for DTC'S - diagnostic trouble codes . On newer vehicles like yous ,everything set's a code now a days . Probably a electrical circuit problem or door ajar switch . Looking at data inputs to SJB - smart junction box , fords BCM - body electronics control module , on a scan tool will show what the problem is . The dealer I work at charge's $ 23.00 to hook - up factory scan tool . Or you could take a chance and change the door ajar switch . Would need to take inside door panel off to get at it .

Jan 23, 2017 | 2003 Ford F-150

1 Answer

How to reset the computer and get it out of limp mode on a 2002 Ford F150 Step by step instructions how to reset limp in mode on my 4-2 Ford F-150 2002


You have to find what is causing it to be in limp mode ! Have the vehicle checked for DTC's - diagnostic trouble codes . Do diagnostic's , fix what the problem is , sensor , wiring , a control module , then the light will go out .

Jan 02, 2017 | Ford Cars & Trucks

1 Answer

What is code po 059 - on F150?


Bank two, sensor one. O2 sensor heater resistance. Replace the O2 sensor on the right/drivers side before the catalytic converter.

Jan 11, 2015 | Ford F-150 F150 Extended Cab

1 Answer

Ford focus car showing dtc code E200,E510,E197, D900


The following link will provide you with all OBD-II codes for your Focus. CLICK HERE

Jun 22, 2012 | 2006 Ford Focus

1 Answer

Dtc fail code P0171 and then p2004


a po 171 is a bad 02 sensor

Mar 03, 2012 | Ford Cars & Trucks

1 Answer

DTC # 01-PO442 and P1407 are the codes that come up possible solution help


PO-442 EVAP Control System Leak Detected (Small Leak)

You will need to put an EVAP Smoke Machine, on system to find leak

P1407--Should be EGR related.

Most likely need new EGR Valve

May 23, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I need to know about a code po 1336 for s10 1998


Are you sure it is po 1336 or is it P0336? Here is info for P0336 DTC Number P0336 DTC Name Crankshaft Position Sensor "A" Circuit Range/Performance

Feb 16, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Yes my truck is 1998 ford f 150 4.2 an i have code po174






DTC code p0174 means "System too lean (Bank 1)"

Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exahust). On V6/V8/V10 engines



, Bank 2 is generally the side of the engine that doesn't have cylinder #1.

Jan 09, 2010 | 1999 Ford Windstar

1 Answer

2006 ford f150 dtc codes 401, 402, 607


It is very possiable that you may be getting a false code that will reocure till egr problems are repaired. The ecu may be trying to compensate for egr problems causing it to send the 607 code

Oct 02, 2009 | 2006 Ford F-150

Not finding what you are looking for?
1999 Buick Regal Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...