Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had same problem and changed the special thermostat twice before I solved the problem.Make sure you got the right one as it is special according to a bulletin on overheating. the first one was defective. Good luck
Posted on Feb 15, 2009
2000 Oldsmobile Intrigue V6-214 3.5L VIN H SFI
Spark Plug: Service and Repair
J 43094 Spark Plug Boot Puller
1. Turn OFF the ignition switch.
2. Remove the ignition coil assembly.
3. Use the J 43094 in order to remove the spark plug boots from the spark plugs.
NOTE: Allow the engine to cool before removing the spark plugs. Attempting to remove the spark plugs from a hot engine may cause the plug
threads to seize causing damage to cylinder head threads.
NOTE: Clean the spark plug recess area before removing the spark plug. Failure to do so could result in engine damage because of dirt or
foreign material entering the cylinder head, or by the contamination of the cylinder head threads. The contaminated threads may prevent the
proper seating of the new plug. Use a thread chaser to clean the threads of any contamination.
4. Remove the spark plugs from the engine.
NOTE: Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the
vehicle. Installing spark plugs of another type can severely damage the engine.
NOTE: Check the gap of all new and reconditioned spark plugs before installation. The pre-set gaps may have changed during handling. Use a round
feeler gage to ensure an accurate check. Installing the spark plugs with the wrong gap can cause poor engine performance and may even damage the
1. Measure the spark plug gap on the spark plugs to be installed. Compare the measurement to the gap specifications. Refer to Spark Plug Usage.
Correct as necessary.
NOTE: Be sure that the spark plug threads smoothly into the cylinder head and the spark plug is fully seated. Use a thread chaser, if necessary,
to clean threads in the cylinder head. Cross-threading or failing to fully seat the spark plug can cause overheating of the plug, exhaust blow-by, or
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the spark plugs to the engine.
Tighten the spark plug to 20 N.m (15 lb ft).
3. Install the spark plug boots to the ignition coil assembly.
4. Install the ignition coil assembly.
Posted on Sep 13, 2009
Tips for a great answer:
Jan 19, 2015 | 1999 Oldsmobile Intrigue
Aug 26, 2014 | 1999 Oldsmobile Intrigue
Feb 19, 2012 | 1999 Oldsmobile Intrigue
Apr 05, 2010 | 1999 Oldsmobile Intrigue
Jan 10, 2010 | 1999 Oldsmobile Intrigue
Oct 20, 2009 | 1999 Oldsmobile Intrigue
Oct 11, 2009 | 1999 Oldsmobile Intrigue
Jun 26, 2009 | 1999 Oldsmobile Intrigue
Jan 09, 2009 | 1999 Oldsmobile Intrigue
Nov 21, 2017 | Cars & Trucks
Nov 21, 2017 | Cars & Trucks
30 people viewed this question
Usually answered in minutes!