Question about 1985 Toyota Cressida

1 Answer

Where is my fuel pmp relay at

Where is ,my fuel pump relay at

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 641 Answers

Hi Leeanne
If it is an injected model, here is the AllData instructions;

CIRCUIT OPENING RELAY (that is what it's called).

On Camry, Celica Corolla RWD and Van models, remove glove box. On Pickup and 4Runner models, remove right kick panel, glove box and speaker. On MR2 models, remove rear luggage compartment trim. On Cressida and 1985---Early 1986 Supra models, remove left kick panel. On Corolla FWD models, remove ECU cover from behind center console. On late 1986---1988 Supra models, remove right side kick panel.
Remove circuit opening relay with wiring from bracket.
Insert voltmeter positive probe into rear of connector at Fp terminal.
Meter should read battery voltage during cranking and while engine is running.
Disconnect electrical connector from relay and measure resistance between terminals.
If relay fails to perform satisfactory, relay is defective.


There is also a main relay on the left side. This will control the ECU

You might check this as well:

most of the time it is on the driver side down low inside the kick panel to test the pump you jump the two terminals under the hood by the fuse panel, the B+ one and the FP one with a paperclip

Posted on May 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put a new fuel pump in a 2000 impala and it still want crank


In the engine wiring harness junction block, check the 15A F/PMP RLY FUSE. If it is OK, the fuel pump relay or the fuel pump/level sensor could be defective.

Dec 03, 2016 | 2000 Chevrolet Impala

1 Answer

Fuel pump fuse for 04 bonneville


F/PMP Fuse #1 20amp rear fuse box . Do you know where it is located ? Under the rear back seat left side . All so fuel pump relay lives there as well !
Fuse Block - Rear
In the passenger compartment, under the left side of the rear seat cushion.

Oct 30, 2016 | Cars & Trucks

1 Answer

Were is a fuel pump relay switch located on a 2000 Oldsmobile intrigued


Hey James , It's in the under hood fuse box , F/PMP relay an there is a fuse F/PMP 15 amp. Underhood Accessory Wiring Junction Block
Right side of the engine compartment, mounted to the strut tower

The PCM controls the fuel pump relay by supplying switched ignition voltage to the fuel pump relay coil. When the ignition switch is first turned On, the PCM energizes the fuel pump relay. The relay contacts close applying power to the fuel pump. The fuel pump relay will remain On as long as the engine is running or cranking and the PCM is receiving reference pulses. If no reference pulses are present, the PCM de-energizes the fuel pump relay within 2 seconds. With the engine stopped, the fuel pump can be turned On with a scan tool.
If the PCM detects a problem on the relay control circuit, DTC P0230 will set. Use this table if DTC P0230 is not set and a problem exists with the fuel pump!

Apr 13, 2015 | Oldsmobile Cars & Trucks

1 Answer

Cant find which relay on my 2005 Chevy silverado 1500 hd is the fuel pump relay


Should be in the box in the engine compartment marked F/PMP.
The diagram should be in your owners manual.

Feb 24, 2013 | 2005 Chevrolet Silverado 1500HD

1 Answer

1989 Ford Probe engine stalls. Will run intermittent and run up to 5k RPM...then die. I hear fuel relay click under dash (replaced w/fuel pump, inertia switch & fuel rail regulator). Wiring? Air hose...


First, the power relay turns on engine computer. Then the engine computer turns on the fuel pump relay which in turn, turns on the fuel pmp for 5 seconds, unless the engine is running. If you have a new pump, check for spark right after it dies next time.

Oct 23, 2011 | 1989 Ford Probe

1 Answer

Where is the fuel pump rlay?


The fuel pump relay for the 1989 Oldsmobile Cutlass Ciera is under the hood on the passenger side in front on the frame wall by the headlights. There are 5 relays in a row the first two is your fuel pmp and fuel sensor.

Apr 17, 2010 | 1989 Oldsmobile Cutlass Ciera

1 Answer

The fuel pump is not geting power . and I cant find the relay


It could very well be that your fuel pump went bad. I am more inclined to say that the in tank fuel pump would go before before the relay . But you should find the fuel pmp relay under the hood near the main fuse box, if not in it.

Dec 20, 2009 | 1998 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...