Question about Cars & Trucks

Open Question

Can anyone fix luminglas disc. Wire detached from disc bulb?

Posted by on

  • MARWAT
    MARWAT May 08, 2014

    Hi Barry Bindell, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box? disc bulb is accually ABS sensor

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2004 chevy tahoe. Once the instrument cluster wire clip is detached and new bulbs are soldered on the cluster. Does the instrument cluster have to be reprogrammed ?


Shouldn't need reprogramming. I removed the cluster from my 04 Silverado and sent it in for repair and replacement of the bulbs. It was out of my truck for 2 weeks. When I got it back everything worked just fine, no problems at all.

Jan 15, 2017 | 2004 Chevrolet Tahoe

1 Answer

2000 landrover disc. rear signals not working but front signals are can anyone please help


check the rear lighting wire loom from rear of light clusters ,trace the earth wire to the body/chassis connection to ensure a good earth , check for power to the indicater lamp , the bulb holders may be the problem , this is a problem that requires patience as can be hard to trace

May 08, 2014 | 2000 Land Rover Discovery

1 Answer

Tail lights dont turn on


1. Replace your car tail light. You will need working gloves to protect your hand during the process. Of course you will also need a screwdriver, cleaning cloth, wire brush, and a good set of tail light bulbs.

2.Understand that different models of car have different set of tail light covers. Naturally, these covers will require different un-installation procedures. So, determine if you can dismount the cover from the outside or you will have to dismount it from the trunk of the car.

3.Determine how to dismount the tail light cover, carefully detach it from the car. You can use different sets of screwdrivers for this. Be careful not to break the tail lights cover. The important thing is you must be able to expose the bulb in order to extract it.

4.Remove the tail lights cover, unscrew the bulb from its socket. Sometimes you will have to press a little and twist the bulb in order to extract it from the socket.

5.Extract the bulb, bring it to your favorite auto parts and accessories store and find the exact match of your tail light bulb. Be sure to get the correct match because if you use other types of bulb, your tail lights may not work properly.

6.Reinstall the tail light bulb, clean the aluminum casing of the tail light. Wipe the socket and wiring with a dry cloth. You can use wire brush if there are corrosion around the tail light casing.

7.Put the good bulb on the socket. You might still need to apply a little pressure on the socket before you can install it fully.

8.Reinstall the tail light bulb, replace the cover of the tail lights and secure it tightly.

9.Test to make sure your new tail lights are working. Start the engine and apply the brakes. You can ask someone to see if the tail lights are really working.

resource: http://www.wikihow.com/Fix-Car-Tail-Lights

Aug 27, 2012 | 1998 Buick LeSabre

1 Answer

My saturn signal light work sometime than go off if it the flasher please tell me there it is in my car


IF TURN SIGNAL LIGHT DONT WORK SOME TIMES.CHECK FOR BLOWED OR LOOSE FUSE.CHECK TURN SIGNAL BULBS AND CHECK BULB SOCKETS FOR CORROSION.CHECK TURN SIGNAL FOR BAD GROUND.USE JUMPER WIRE BETWEEN GROUND SIDE OF THE TURN SIGNAL BULBS AND A GOOD CHASIS GROUND.IF ALL IS GOOD TURN SIGNAL SWITCH IS BAD OR FLASHERS GOING BAD.TURN SIGNAL FLASHER LOCATED ON CENTER CONSOLE SIDE PANEL GRASP THE FLASHER UNIT AND DETACH IT FROM THE FUSE BOX.IF YOU HAVE EARLY MODEL VECHICLE FLASHER UNIT LOCATED AT THE FRONT OF THE FUSE BLOCK.

Aug 23, 2011 | Saturn LS Cars & Trucks

1 Answer

How hard is it to change a fog light bulb on a 2005 Subaru Forester? Can anyone do it?


Front Fog Light Assembly

REMOVAL


  1. Disconnect the ground cable from battery.
105919447



  1. Remove the two clips and lower mudguard on side that bulb is being changed.
  2. Disconnect the harness connector from bulb on back of fog lamp.
105919448




Front Fog Light Bulb

REMOVAL


1. Locate back cover on fog lamp assembly where bulb is located inside.

105919462



  1. Remove the back cover.
105919463



  1. Remove the spring retainer, and then detach the fog light bulb.
  2. DO NOT TOUCH HALOGEN BULB!! Oils from skin will cause bulb to explode during operation.

Jul 27, 2011 | Subaru Forester Cars & Trucks

1 Answer

How do i remove and replace the driverside headlamp


here is how
1. Shut off the engine, pull the keys out of theignition and set the parking brake for added safety. Open the hood using theprimary and auxiliary hood release latches.2. Remove the under-hoodfuse box from its holder if you're changing the driver's side headlight (2007and later models only.)3. Detach the electricalconnector by pulling it straight back from the bulb.4. Pull the tab on therubber weather seal to remove it from the bulb socket. 5. Unclip the end of theretaining wire and pivot it away from the socket. Extract the old headlightbulb from the socket and dispose of it immediately. 6. Insert the new bulbdirectly into the socket and clip the retaining wire back into position.Replace the rubber weather seal and attach the electrical connector to the backof the new bulb. 7. Start the engine andswitch the headlights on to see if the new bulb works. If it does, replace theunder-hood fuse box and close the hood.

Nov 20, 2010 | 2002 Honda CR-V

1 Answer

2006 Chevrolet Silverado left brake light consistenly burns out. The filament in the bulb is not the problem. The wire on the plug section of the bulb is burning up. This is my 4th brake light in 3 months...


Hi!!
I had same problem, replace the socket, I got one at the junkyard and has been two yrs. with same bulb. It also happened to a friends car running lights, same fix.
Good Day!! Don't forget to rate this post!!

Aug 20, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How do i replease the fog lights on my 2003


To replace the foglights, you need to get at them from the backside, under the car. The best way is to jack the car up to give yourself some room.

It is very easy to replace and you can replace JUST the bulb. Don't have anyone tell you you have to replace the entire assembly.

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Detach the connector for the foglamp.
  3. Twist the foglamp bulb 1/4 of a turn and remove the bulb from the foglamp lens.
To install:
  1. Twist the bulb until the tangs engage into the foglamp lens.
  2. Attach the connector for the foglamp.
  3. Connect the negative battery cable.

Feb 13, 2010 | 2003 Pontiac Sunfire

1 Answer

I need to replace a headlight ( replace a bulb). How do I do that?


Reach behind the headlight and you will find a (cap). twist it off counter clockwise then remove bulb. detach bulb from wire harness. Attach new bulb to wire harness and gently insert back into headlight. Reattach the cap and viola! You may have a slightly different set-up or actual clips behind the bulbs. If this is the case just grab both clips like tweezers push down slightly and pinch together to get the bulb out. Be sure to remove anything that may be in the way of the bulbs before you start. Just remember not to touch the glass part of the new bulb. Also... If you purchase the bulb from and autoparts store, sometimes they will replace for free. hope this helps!

Dec 28, 2008 | 1992 Honda Accord

1 Answer

2001 Lexus IS300, I am have touble getting the hid light out?


Ser Brando,

On the HID LIght on the back, remove the wiring harness by pushing down on the release as you pull, the wiring harness will detach from the bulb. There is a double wire clip that must be released one side at a time. To release it, push down on the right clip and to the right. On the left side push down and to the left. Pull both wires up and pull the bulb out.


Good Luck

SteveSeeley@live.com

Dec 17, 2008 | 2001 Lexus IS 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...