Question about 2004 Buick Rendezvous

1 Answer

Where is the Canister Purge Solenoid located

Where on the gas tank is the Canister Purge Solenoid located? I have the part just can't find where it is.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 268 Answers

Under the vehicle under the drivers seat along the frame. behind the fuel filter

Posted on May 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canister vent solenoid


it is not on the fuel tank it is on a small box located near the fuel tank or in some cases it is located on the vent line going to the vent boox

May 08, 2014 | 2004 Buick Rendezvous

2 Answers

2006 Kia Sedona code p0441 faulty purge control solenoid faulty vent solenoid blocked vapor canister where are they located?


charcoal canister is on left front and hoses from it connect to the other components. over filling at petrol stops is most common cause of faults

Nov 27, 2012 | Cars & Trucks

1 Answer

Vapor Purge Solenoid Location 2007 Pontiac GP


Near the gas tank next to the carbon canister. Check the under hood emission system sticker for exact location

Jun 17, 2012 | Cars & Trucks

2 Answers

Where is the evap purge/vent solenoid located on the Cadillac CTS 2003


It is located under the car near the gas tank on a tray with the fuel vapor storage cannister

Jul 09, 2011 | 2003 Cadillac CTS

1 Answer

Where is the evap purge canister valve located on a 2002 kia sedona?


The canister purge valve is located behind the intake manifold in the engine compartment on the firewall side .It should be a small round solenoid with a wire connector attached.It will have a feed hose from the evap cannister to the purge valve and then to the intake manifold.The evap canister is located on under the vehicle on the right side of the gas tank and is held in place by a bracket.If you follow these hoses it will also get you to the canister purge valve.I hope this helped.

Feb 03, 2011 | 2002 Kia Sedona

1 Answer

The vehicle wont accept fuel it spills all over and gas gauge is stuck over full??? but runs out of gas,then very very very slowly it accepts very little gas then you can drive again.chevyscott20@yahoo.com


SOUND LIKE YOUR EVAPORATIVE EMISSION CONTROL NOT WORKING.SCAN VECHICLE FOR FOR FAULTY FUEL TANK PRESSURE SENSOR MALFUNCTION.AND THE CANISTER PURGE SOLENOID VALVE OR CANISTER VENT SOLENOID NOT WORKING.CAUSING EXCESSIVE FUEL PRESSURE AND FUMES BUILD UP IN FUEL TANK.CHECK CANISTER IT COULD BE GAS SOAKED NEED REPLACING OR VACUUM LINES GOING TO CANISTER PURGE SOLENOID OR VENT SOLENOID COULD BE BROKEN.PURGE VALVE LOCATED ON THE LEFT SIDE OF THE ENGINE ON A BRACKET AND VENT SOLENOID LOCATED ON A BRACKET NEXT TO FUEL TANK.CHECK BOTH MAKE SURE VACUUM LINES NOT BROKE OR DISCONNECTED.MAKE THE ELECTRICAL CONNECTOR INTACT ALSO.FUEL PRESSURE SENSOR ON TOP OF TANK ON THE FUEL PUMP MODULES.ALL YOU CAN DO IS REMOVE CANISTER SEE IF FULL OF GAS REPLACE IT.AND CHECK FOR BROKE AND DISCONNECTED VACUUM LINES.THE DEALERSHIP HAS TO HOOK UP DIAGNOSTIC EQUIPMENT CHECK IT OUT.BE CHEAPER BECAUSE ALL THEM EVAP PARTS NOT CHEAP THAT WHY LET DEALERSHIP SCAN IT SAVE MONEY IT WILL CUT THE COST.WARNING DONT KEEP DRIVING VECHICLE.GAS VAPORS PRESSURE BUILD UP ON HOT DAY FUELTANK WILL BLOW UP LIKE BALLON.PRESSURE KEEP BUILDING UP.

Oct 16, 2010 | 2001 Chevrolet Blazer

2 Answers

Error codes P0442 and P0455 in Dodge Dakota 2001


Hello shoretex...Yes sir you can repair this yourself...
p0442 is medium leak detected ...p0456 is small leak....and p0440 is a general evap system failure.. evap codes are a common thing. gas caps are an inexpensive place to start. There are two types of evap hoses on the Dodge... hard plastic and soft rubber.... before you replace parts check the soft rubber first at the evap cans and pump located about a foot in front of the gas tank fill pipe on trucks located next to the transfer case or right behind the trans on the driver side. hard plastic lines will brake or rub through...check spots where lines come in contact with anything. this is a common thing with older trucks...hair line cracks will kick a p0442 code, and a p0445 code...When you find a leak, repair it, and rescan...sometimes there are several leaks, continue with inspection and repairs until you get it all fixed up.... Remember..start at simple and work from there...
i will post the evap. system in more detail to help you troubleshoot the problem.
EVAP System: The Evaporative Emission (EVAP) Control system used on all vehicles is the charcoal canister storage method. This method transfers fuel vapor from the fuel tank to an activated carbon (charcoal) storage device (canister) to hold the vapors when the vehicle is not operating. When the engine is operating, the fuel vapor is purged from the carbon element by intake air flow and consumed in the normal combustion process. The evaporative system includes the following components: *Fuel tank *Evaporative emission canister vent solenoid *Fuel tank pressure sensor *Fuel pipes and hoses *Vapor lines *Fuel cap *Evaporative emission canister *Purge lines *Purge valve solenoid EVAP System Operation: The EVAP purge solenoid valve allows manifold vacuum to purge the canister. The Powertrain Control Module (PCM) supplies a ground to energize the EVAP purge solenoid valve (purge on). The EVAP purge solenoid control is Pulse Width Modulated (PWM) or turned on and off several times a second. The EVAP canister purge PWM duty cycle varies according to the operating conditions determined by the mass air flow, the fuel trim, the engine coolant temperature, and the intake air temperature. For certain EVAP tests, the diagnostic will be disabled if the TP angle increases to above 75% . The evaporative leak detection diagnostic strategy is based on applying vacuum to the EVAP system and monitoring for vacuum decay. The fuel level sensor input to the PCM is used to determine if the fuel level in the tank is correct to run the EVAP diagnostic tests. To ensure sufficient volume in the tank to begin the various diagnostic tests, the fuel level must be between 15% and 85% . The PCM monitors the fuel tank pressure/vacuum level via the fuel tank pressure sensor input. Results of Incorrect Operation: Poor idle, stalling and poor driveability can be caused by the following: *Malfunctioning purge solenoid. *Damaged canister. *Hoses/lines split, cracked and/or not connected properly. Evidence of fuel loss or fuel vapor odor can be caused by the following: *Liquid fuel leaking from the fuel lines *Cracked or damaged canister *Inoperative canister control valve Vacuum hoses that are: *Disconnected *Mis-routed *Kinked *Deteriorated *Damaged The evaporative leak detection diagnostic strategy is based on applying vacuum to the EVAP system and monitoring vacuum decay. The PCM monitors vacuum level via the fuel tank pressure sensor input. At an appropriate time, the EVAP purge solenoid and the EVAP vent solenoid are turned on, allowing engine vacuum to draw a small vacuum on the entire evaporative emission system. After the desired vacuum level has been achieved, the EVAP purge solenoid is turned off, sealing the system. A leak is detected by monitoring for a decrease in vacuum level over a given time period, all other variables remaining constant. A small leak in the system causes DTC P0442 to be set. If the desired vacuum level cannot be achieved in the test described above, a large leak or a faulty EVAP purge solenoid is indicated. This can be caused by the following conditions: *Disconnected or faulty fuel tank pressure sensor. *Missing or faulty fuel cap. *Disconnected, damaged, pinched, or blocked EVAP purge line. *Disconnected or damaged EVAP vent hose. *Disconnected, damaged, pinched, or blocked fuel tank vapor line. *Disconnected or faulty EVAP canister solenoid. *Disconnected or faulty EVAP vent solenoid. *Open ignition feed circuit to the EVAP vent or purge solenoid. *Damaged EVAP canister. Any of the above conditions sets DTC P0440. A restricted or blocked EVAP canister vent path is detected by drawing vacuum into the EVAP system. The PCM turns off the EVAP vent solenoid and the EVAP purge solenoid (EVAP vent solenoid Open, EVAP purge PWM 0% ). The PCM monitors the fuel tank pressure sensor input. With the EVAP vent solenoid open, any vacuum in the system should decrease quickly unless the vent is blocked. A blockage is caused by the following conditions: *Faulty EVAP vent solenoid (stuck closed). *Plugged, kinked, or pinched vent hose. *Shorted EVAP vent solenoid driver circuit. *Plugged evaporative canister.

Good luck shoretex, hope this helps...please take time to rate me a fixya.

Jul 20, 2009 | 2001 Dodge Dakota

Not finding what you are looking for?
2004 Buick Rendezvous Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...