Question about 1995 Mercedes-Benz C-Class
Behind fuses on circuit board is where turn signal goes. Autozone, Advanced Auto Part, or NAPA will gladly print location if buying part from them.
Posted on May 08, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You find a 17 mm bolt under the belt or a 15 mm bolt in the middle of the tension pulley. If you undo the bolat this will
release the belt tension.
To remove the belt turn the bolt by slipping a 4' pipe over the socket wrench handle.
Use a wrench as a lever to slide out the belt. Put the new belt last on the idler pulley that contacts the belt only on the smooth side.
Do not unscrew the Button Torx bolt in the center of the tension pulley, it is not needed.
Posted on Sep 01, 2008
hi,pls. remove the cylinder head cover,try to rotate the crankshaft on ot position,then look the hole 5mm in intake and exhaust sprocket,install 2 pcs. of 5mm pin with align on surface of cylinder head,ot on crankshaft pulley and two sprocket lock in the surface of head ,you have a104.941 engine,ty
Posted on Apr 10, 2009
The switch is the stalk assembly on steering column. The hazard switch is the relay(FLASHER). To replace switch r&r LF under dash and unplug 2 connectors at base of steering column(electrical). You will need a long t20 socket to remove airbag and then a 10mm allen to remove steering wheel. There are a series of screws to remove the c.c. switch steering airbag contact and blinker switch. I would recommend replacing the hazard switch first unless you are certain that the blinker switch is bad.
Posted on Aug 04, 2009
hello,good day,try to clean your abs sensor and rotor,apply with wd 40 then cean with compress air,also check electrical connection,for your radio please recheck the power supply specially the parking light wiring,ty
Posted on Aug 15, 2009
Tips for a great answer:
Oct 13, 2014 | 2007 Mercedes-Benz C 280
May 18, 2014 | 1994 Mercedes-Benz C-Class
Oct 05, 2010 | 1994 Mercedes-Benz C-Class
Nov 28, 2009 | 1996 Mercedes-Benz C-Class
Nov 10, 2009 | 1995 Mercedes-Benz C-Class
Aug 01, 2009 | Mercedes-Benz C-Class Cars & Trucks
Jul 02, 2009 | 1994 Mercedes-Benz C-Class
May 27, 2009 | 1994 Mercedes-Benz C-Class
May 13, 2009 | 1999 Mercedes-Benz C-Class
Mar 09, 2009 | 1998 Mercedes-Benz C-Class
Jun 14, 2014 | 1995 Mercedes-Benz C-Class
74 people viewed this question
Usually answered in minutes!