Question about 1994 Mercury Tracer

Open Question

1994 mercury tracer timming marks

How do you set the timming on a 94 mercury tracer?

Posted by Anonymous on

  • Bonny Pridemore Jul 13, 2014

    It would take too much typing to walk you through it. My recomendation would be to go buy a chilton manual for your car. It is very detailed and walks you through the process.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: 1994 Tracer

usually a surefire way to check the problem is first check the fuel pump relay.when you turn the key you should hear the relay click(they are located underneath the center console on the passengerside) if the relays are good, then check the fuel shutoff switch to see if it was triggered(this is located on the passenger side in the rear wheel housing,there is a little pull off panel and it's marked.press the reset button on top if it's tripped. If you still have a problem the othere things to check are the firing of the plugs if there is fire your fuel pump is bad,if not you eithere have a bad coil pack or a timing belt issue

Posted on Aug 27, 2008

Ad
  • 147 Answers

SOURCE: timing marks on crankshaft sprocket for a 94 mercury tracer

no it should not have a missing tooth it should be a <v> on the outside of the sprocket

Posted on Nov 17, 2008

Mike258
  • 1498 Answers

SOURCE: serpentine belt for 1998 mercury tracer

Hey there MSM,

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator. The routing diagram is on one of the radiator supports.
  • The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Dec 14, 2008

ZJLimited
  • 17970 Answers

SOURCE: belt routing diagram for 1997 mercury tracer?

Check this...

f307936.gif

Hope helps.



Posted on Jul 21, 2010

  • 14036 Answers

SOURCE: How do I remove the turn signal/light switch from

TURN OFF RADIO FIRST TO KEEP FROM LOCKING IT OUT.DISCONNECT NEGATIVE BATTERY CABLE WAIT 20 MINUTES FOR AIRBAG TO DISCHARGE THEN.REMOVE STEERING WHEEL COVER RETAINING SCREWS FROM THE BACK SIDE OF THE STEERING WHEEL AND REMOVE THE COVER.DISCONNECT THE HORN ELECTRICAL CONNECTOR AND THE SPEED CONTROL ELECTRICAL CONNECTORS IF EQUIPPED.REMOVE THE STEERING WHEEL MOUNTING NUT OR BOLT.YOU NEED A STEERING WHEEL PULLER TO REMOVE STEERING WHEEL DONT USE A HAMMER ON STEERING WHEEL BECAUSE IT WAS FACTORY MADE TO COLLAPSE DURING A CAR ACCIDENT.IF HIT STEERING WHEEL WITH HAMMER IT WILL COLLAPSE.USE STEERING WHEEL PULLER YOU CAN BUY ONE AT SEARS AUTO TOOLS OR SNAP ON TOOLS ALSO MOST AUTO PARTS STORE CARRY IT ALSO.OKAY AFTER REMOVING STEERING WHEEL.REMOVE THE 4 RETAINING SCREWS FROM THE STEERING COLUMN LOWER COVER AND REMOVE THE COVER REMOVE THE UPPER COVER.DISCONNECT THE 3 MULTIFUNCTION SWITCH ELECTRICAL CONNECTORS.REMOVE THE MULTIFUNCTION SWITCH RETAINING SCREW PULL THE ELECTRICAL CONNECTORS FROM THE RETAINING BRACKETS AND REMOVE THE SWITCH.INSTALL EVERYTHING VISA VERSA.TORQUE STEERING WHEEL MOUNTING BOLT TO 34 - 46 FT LBS.

Posted on Oct 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i have a 94 mercury tracer and it has a non existant idle after it gets off of a cold idle. whoever is driving it has to keep there foot on the gas otherwise it dies. any idea what it is? any answers...


sounds like you might have a large vacuum leak, open the hood, set the parking break and start the engine then listen under the hood for a sucking sound usually somewhere around the intake. look for loose or dissolved vacuum lines sucking air into the intake. replace bad vacuum lines with new ones the same size so they don't come loose.

Dec 25, 2010 | 1994 Mercury Tracer

1 Answer

Do you have to pull the engine yo change the water pump on a 94 Mercury Tracer


no you have to take the timing belt off and there is a pulley connected to the water pump and that should give you access to water pump hope this helps the water pump will look almost flush with the engine its a little thing nesr bottom of the motor

Sep 11, 2010 | 1994 Mercury Tracer

1 Answer

I have a 94 mercury tracer that's not emitting heat when turned onto Heat settings, yet air passes through the vents. What gives?


Check your coolant level. If the coolant is low it won't pass through the heater core, therefore you get no heat. The overflow bottle really isn't an accurate way to check the level, actually remove the radiator cap and look in there. You should be able to see the coolant near the top. BE SURE THE ENGINE IS COLD BEFORE YOU REMOVE THE RADIATOR CAP!!!

Mar 04, 2010 | 1994 Mercury Tracer

1 Answer

94 Mercury Sable is stuck in neutral


shifting linkage is shot...time to see a mechanic($80-125)

Jun 14, 2009 | 1994 Mercury Tracer

1 Answer

Timing marks on crankshaft sprocket for a 94 mercury tracer


no it should not have a missing tooth it should be a <v> on the outside of the sprocket

Nov 17, 2008 | 1994 Mercury Tracer

Not finding what you are looking for?
1994 Mercury Tracer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...