Question about 1997 Lincoln Town Car

1 Answer

Driver side window seems to be off track motor works

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 56 Answers

Take the pannel cover off and see if the window is still on the regulator or if the regulator has snapped. This is like a metal bar with bit the glass is bolted/pop rivited onto. See is you can slide it up and down from there or see if the motor has fell off! it could happen

Posted on Aug 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side window came off track


it is not off track. the grinding or metal scratching noise is from the window regulator cable that has broke off from the plastic idler pulley on regulator and is now wound up on the motor. you need a new window regulator.

Aug 31, 2014 | 2007 Toyota Avalon

2 Answers

Why is only the driver side window is working on my 1996 maxima


electric window dead.
fails to go up and down?
  1. blown fuse in the , fuse box.
  2. bad switch
  3. bad wires from fuse , switch and motor
  4. bad motor.
  5. window track jammed, and overloads said motor.

in a shop we dont guess. we use a $10 volt meter,
and measure the voltage to the motor pins, ACTIVE.
I got 12v yes, good
i dont get 12v, the controls are not sending 12v to motor, trace that with the meter. (easy is pie)
got 12v.
it dont move but buzzes, tack is jammed or motor bad.
if motor is silent and dont even twitch with 12v, (active) its bad.
if the motor seems overloaded, then disconnect the motor drive.
and see if the window does move easy, if not, bingo its jammed.
ill stop here, and not go in to the long topic of how to rebuild tracks.

May 20, 2014 | 1996 Nissan Maxima

1 Answer

Power window drverside not working


There would be no relay for driver's side only. If the clicking is from the door, the gears on the motor may be stripped or the lifting mechanism, the track, may need checked. You will have to pull off the inner door panel to check. You just may need a new motor or a new regulator mechanism.

Apr 19, 2013 | 2001 Ford Escort ZX2

1 Answer

2005 chevy equinox. drivers side power window. window gets stuck have to manually help it get...


need to remove the door panel and check the tracks or for debris in track

Jun 17, 2017 | Cars & Trucks

1 Answer

Window motor on ford clubwagon


try putting lube on the window track

Oct 05, 2009 | 2003 Ford E150

1 Answer

Drivers side power window, goes down, but stalls about half way up. Motor is hot to touch.


Seems the window is 'dragging' in it's track or it is OUT-OF-TRACK. Verify that the window is in it's track - if so, find/get some silicon spray and spray it down the front & rear track. See if that does the trick. If you discover the window is OUT-OF-TRACK, you'll need to put it back in its track (or find someone who knows how to do this). If neither of these solutions works, perhaps you should take it into the Hyundai Dealership and have them diagnose the problem.

May 26, 2009 | Hyundai Santa Fe Cars & Trucks

1 Answer

Driver's side power window will not go back up


im asssuming it is power windows the window track could be off its mounts or po0wer motor is failing from drag check the tracks and glass rubbersalso .could have a failing switch or poor connection

Dec 03, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1997 Lincoln Town Car Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...