Question about 1987 Suzuki Samurai
Is the dash controls set in heat + defrost mode?
A/C only mode ( <<<<I will guess this)
you are lucky A'/C works after 27 years.. for sure.
that is an all time first. rains.
what is the outdoor temperatures?, one thing i cant guess.
what is your question, the above is a statement.
and can be true, heater off, A/C on. on any car. controls wrong.
I will try to rephrase it.
I'ts hot, outside and my A/C fails. not moving.
and seems to work a bit, when raining.
and works ok moving fast. why?
fan in front of the A/C condenser failed?
if the front fan fails , the A/C will be weak, , not moving fast (car)
and will work better in rain, because the rain cools the condenser partially hiding the fact that front fan is DEAD.
that fan , to find it, look in the front grill. see it. that black fan
id bet it's dead'. (that dont mean it bad; per ce'.) it can be the relay
that drives it , that's bad, or the wires connecting either bad.
as we say 1s things, first the glance at the fan ,then more tests
if all this is greek, get the car serviced.
Posted on May 08, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this one of them 4x4 jeepy things , you have to remove the viscous fan to get at the bolts if memory serves me i think their is 5 or 6 bolts
Posted on Feb 01, 2009
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
the allen wrench bolts should be the correct bolts to remove brake caliper to allow access to pads.
hint: there will be only two bolts to remove and they will be the same maybe different lengths
Posted on May 02, 2009
Is it a 4x4 if it is you would have to seperate the tranny from transfer case and drive shaft tp change out seal.If not just drop the drive shaft and replace seal.We are talking about the rear seal at the end of the tranny.
Posted on May 17, 2009
Tips for a great answer:
Aug 02, 2012 | 1987 Suzuki Samurai
Jan 28, 2011 | 1987 Suzuki Samurai
May 04, 2010 | 1986 Suzuki Samurai
Mar 20, 2010 | 1993 Suzuki Samurai
May 17, 2009 | 1987 Suzuki Samurai
May 02, 2009 | 1987 Suzuki Samurai
Mar 02, 2009 | 1987 Suzuki Samurai
Jan 09, 2009 | 1988 Suzuki Samurai
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: