An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 500 points.
Re: starter is out I need to tow it to shop. how do get...
I'm no authority on Honda's but will the shifter not move when you put the key to the run position (not to the start position) and put your foot on the brake? We did this all the time in the shop to move cars around that wouldn't run. If not you may very well have to get the car floated to your shop. just a thought,good luck
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
steering wheel will lock if lock tab is not worn also wont be able to put into neutral with out key -----go to nearest GM dealer with ur vin which can be found on registration/insurance cards title and have a key cut -bring proof of ownership -----as to getting it towed the tow driver will either dolly it or disconnect shift linkage to put in neutral
any good ase shop can do this. or any 4wd shop. no need for stealerships.
no man on earth can answer this, i bet, why?
depends on CAUSE.
you could check all connections to the related parts
you never stated which driveline options you have,
of the many,
I had this problem.. on my carthe nutural safety switch its called a "combination switch" $175 So i put a push button on the dash which is wired from the battery to the starter.. now if it does not turn over i just turn on the key and push the button.. switch was $3. and about $3 worth of wire.. Works Great..
yes -- you can just step on the brakes and the shifter will shift to neutral. BUT WAIT -- instead of paying for the tow truck to come and tow the car,, just call a automotive locksmith to come out and make you a set of new keys for the car,, this will only take about 30 to 45 minutes and cost only about 75 to 85 dollars.
i have the same problem with 04 turn your key until the lights on the dash come on and see of the security light is flashing if so wait about 10 min for the security system to reset as soon as the light stops flashing turn the key off then your car should start right up
Yes it can, just place your Transfer Case in Neutral position.
Shifting into NEUTRAL To shift the transfer case to NEUTRAL do the following:
Make sure the vehicle is parked so that it will not roll. Set the parking brake. Start the vehicle or turn the ignition to RUN. Connect the vehicle to the towing vehicle. Put the transmission in NEUTRAL (N). Shift the transfer case to 2HI. Simultaneously press and hold the 2HI and 4LO buttons for 10 seconds. The red NEUTRAL light will come on when the transfer case shift to NEUTRAL is complete. Shift the transmission to REVERSE (R) for one second, then shift the transmission to DRIVE (D) for one second, or FIRST (1) for vehicles equipped with a manual transmission. Turn the ignition to LOCK. Place the transmission shift lever in PARK (P), or FIRST (1) for vehicles with a manual transmission. Release the parking brake prior to towing. Shifting Out of NEUTRAL To shift out of NEUTRAL:
Set the parking brake and apply the regular brake pedal. Shift the transmission to NEUTRAL (N) and turn the ignition to RUN with the engine off. Press the button for the desired transfer case shift position (2HI, 4HI, AUTO 4WD or 4LO). After the transfer case has shifted out of NEUTRAL the red light will go out. Release the parking brake. You may start the engine and shift the transmission to the desired position. Excessively shifting the transfer case into or out of the different modes may cause the transfer case to enter the shift protection mode. This will protect the transfer case from possible damage and will only allow the transfer case to respond to one shift per 10 seconds. The transfer case may stay in this mode for up to three minutes. NEUTRAL: Shift the vehicle's transfer case to NEUTRAL only when towing your vehicle. Good luck and hope this answers your question.
Shifting to NEUTRAL To shift the transfer case to NEUTRAL, first make sure
the vehicle is parked so that it will not roll:
1. Set the parking brake.
2. Start the vehicle.
3. Connect the vehicle to the towing vehicle.
4. Put the transmission in NEUTRAL (N) or have
the clutch pedal pressed for vehicles with
5. Shift the transfer case to 2HI.
6. Simultaneously press and hold the 2HI and
4LO buttons for 10 seconds. The red NEUTRAL
light will come on when the transfer case shift to
NEUTRAL is complete.
7. Shift the transmission to REVERSE (R) for one
second, then shift the transmission to DRIVE (D)
for one second or FIRST (1) for vehicles with
8. Turn the ignition to OFF.
9. Place the transmission shift lever in PARK (P) or
FIRST (1) for vehicles with manual transmission.
10. Release the parking brake prior to towing.
Shifting Out of NEUTRAL
To shift out of NEUTRAL:
1. Set the parking brake and apply the regular
2. Start the vehicle with the transmission in PARK (P)
or FIRST (1) for vehicles with manual transmission.
3. Press the button for the desired transfer case position
(2HI, 4HI, AUTO 4WD or 4LO).
4. Put the transmission in NEUTRAL (N) or press the
clutch pedal for vehicles with manual transmission.
5. Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light will go out.
6. A re-engagement sound is normal when shifting out
I have a jeep wrangler and to have it towed you are suppose to put the transverecase in neutral after you first depress brake pedal put trans in neutral then start engine shift auto trans into drive release brake pedal make sure there is no movement, shut engine off with key left in acc position shift auto trans into park, disconnect neg battery cable (damage can result in trans if shifted into park while transvere case is in neutral with engine running) you should refere to your owners manuel
If it is automatic the quick is a two wheeled tow dolly. Or if that is not desirable then a RV repair shop can recommend a towing package that will disengage the torque converter in the transmission. Either way is about 1K.