Question about 2007 Pontiac G6 GT
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Floor jack- jack car up and put a jack stand under it. A tire lug to remove tire. A 36 mm socket to unbolt axle shaft sticking through bearing hub. Next a Brass hammer with a block of wood. Next center wood on axle shaft sticking through bearing hub and hit with a 4lb brass or steel hammer with a wood block on shaft. Next you need a 10mm or 12mm socket on back side of bearing hub should have 3 bolts holding it unbolt. Last use a pry bar and gradually pry bearing out and no there not pressed in like a lot of people think.
(Socket sizes maybe different)
If you take it somewhere it would cost about $800 and up.
Posted on May 03, 2009
remove wheel brahes and rotoe then remove axle nut and there are 3 bolts holding bearing to car remove these unplug wiring to bearing tap with hammer til bearing is off reinstall bearing in reverse order
Posted on Jul 21, 2009
use a hammer to tap on the head of the shaft to push it back out, put a small block of wood on it before hitting it so you dont mushroom the end or distort the threads.
Posted on Mar 21, 2010
Tips for a great answer:
on Apr 10, 2012 | 2001 Chrysler Town & Country
Mar 02, 2013 | Cars & Trucks
Dec 21, 2012 | 2007 Pontiac G6 GT
Sep 21, 2010 | 2007 Dodge Grand Caravan SXT Minivan
Mar 21, 2010 | 2006 Pontiac G6
Feb 17, 2010 | 2007 Pontiac G6 GT Convertible
Jul 21, 2009 | 2006 Pontiac G6
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: