Question about 2003 Audi A6
All answers USA< so>>>>>>>>
if it has one, its seen in all operators guides, its best to just have the guide. I cant help unless country is stated.
or 3rd google hit is here.
seem seem audi online only has facts post 2008,, and no free manuals. just (basics)
Posted on Jun 28, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 a6 jump starting
I found the battery myself. All of the responses were incorrect as to where the battery was located. Everyone said it was up front but in my car, it is in the trunk. I got the problem fixed myself.
Posted on Jun 16, 2008
SOURCE: AUdi A6 gas tank button
There is no button to open the gas door from the inside of the car. As long as the doors are unlocked, you should be able to push in the far right side of the gas door and the left side will pop open. I too spent hours looking for this non existent button..I went as far as to going back to the car dealership.
Posted on Jan 06, 2009
ok what breaks on most of these shift interlock shifter ***. is where the interlock cable attaches to the shifter assy. chrysler has the same prob. cheap stuff. no i don't think you can fix it as when it was new it already was junk. call a junk yard or try to get one off ebay. and yes they are very easy to replace. goodluck
Posted on Jan 27, 2009
The problem with this wiper blade set up is the slides get jammed up w/ crude. You should lubricate the slides and they should slide off. Then carfully lift the arm and remove the blade. Warning you should never leave the arm in the upright position. Windshields get cracked this way. Also note the pivit points the blades attach too. These will normally sieze up and cause clearing issues even with new blades. Lubricate these pivit points and use a pair of channel locks to move it back and forth until it will go 360 degrees with your fingers. Install is in reverse order of removal.
Posted on May 28, 2009
The best solution is to use a Vehicle Specific Wiring Kit, as these cars have complex electronics that do not like being overloaded, Also the car has towing specific safety systems (such at Trailer Stability Program) which only work if it knows it is towing. The car will need to be coded to recognise the towbar wiring and work the saftey systems properly after the kit has been installed. It's not cheap however, Expect to pay around £200-£250 for the whole job.
Posted on Jul 21, 2009
Tips for a great answer:
Aug 31, 2016 | 2002 Audi A6
Aug 21, 2016 | 2001 Audi A6
Mar 06, 2016 | 1998 Audi A4
Dec 01, 2013 | 1995 Audi A6
Apr 22, 2017 | 1999 Audi A6
Nov 16, 2009 | 2003 Audi A6
Apr 01, 2009 | 2000 Audi A6
Jan 19, 2009 | 2002 Audi A6
Dec 13, 2008 | 1996 Audi A6
Oct 02, 2008 | 1999 Audi A6
291 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: