Question about 1991 Chevrolet S-10

1 Answer

LOST KEYS HOW DO YOU REMOVE IGNITION SWITCH TO HAVE ONE MADE

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Bad news, You need the keys to remove the ignition. You might be able to find a locksmith with a lock pick kit to get the wsitch unlocked the you can pull it out. To pull the lock you will need to pull the steering wheel and the lock plate. the lock plate is a pain in the ****, But if your local auto parts store has tool rental they will have the tool to make it easier

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a bad key ignition switch effect the inderctor light on the dishboard


New keys with cylinder may not have a transponder chip , or new keys will need to be programmed. you will require two keys equipped with proper transponder for your vehicle, and either new keys cloned with the old transponders. If you have lost the original keys , you will need someone to remove the original keys from the pcm , than marry the 2 new keys to the pcm. If you have an original key , try placing it by the lock cylinder when attempting to start with the key supplied with the new ignition cylinder.

Nov 08, 2014 | 2001 Ford Expedition

1 Answer

How do i remove the ignition switch on a 1987 chevrolet caprice to replace it lost keys?


(pain if you dont have the right tools)

also you are replacing the LOCK CYLINDER, the ignition switch is somewhere else

remove horn button

" steering wheel

" turn signal switch assy

" steering lock plate

" screw holding in lock cylinder

and it\'s not that easy

Oct 25, 2014 | Cars & Trucks

1 Answer

Lost my remote on my 02 jeep liberty and need to


the key fob? or radio remove or what?
remote to what.

the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.

DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.


did i guess right, the Key FOB RKE,
remove key entry fob.?

Sep 18, 2014 | 2002 Jeep Liberty

1 Answer

Lost key and alarm dodge caravan


to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.

Dec 17, 2012 | 2000 Dodge Caravan

1 Answer

Lost keys pontiac trans port, need to remove ignition cyl.


it may work out cheaper to have a locksmith cut new keys for you, talk to one & explain the situation & see what can be done, if you change the ignition switch you will have to change all the door locks & the trunk lock as well.........hope this helps......cheers.

Sep 23, 2011 | 1997 Pontiac Trans Sport

1 Answer

Lost keys to ignition switch, i am farely motor savvy however i do not know how to remove the ignition switch to replace it with a new one. tried gettng a key made by vin but the jeep is to old. how do i...


best way is to remove the complete steering shaft with the lock attached and then a mini angle cutter to cut it off ,when you get it sorted make sure you have spare keys and i always hide one under the car well greased up and wrapped in plastic and dont tell anyone its their .

May 17, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

Flashing alarm light after battery change. Car wont start,


System operation
System arms 5 seconds after switching ignition OFF. Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. If LED flashes rapidly at regular intervals for approximately 1 minute, then flashes at irregular intervals: Key code not recognised. Remove key and try again.
Programming
When
System malfunction: LED illuminates for 1 minute, then flashes at irregular intervals. Key(s) added or replaced.
NOTE: Replacement keys MUST have blue mark. Keys with red mark are NOT compatible with this system.
How
NOTE: Programming method using vehicle keys can be deactivated using diagnostic equipment.
Obtain 2 programmed keys (A and B). Insert key A into ignition switch. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 seconds: Insert key to be programmed into ignition switch. Turn ignition switch to position II. Wait 4 seconds. Switch ignition OFF. Wait 5 seconds. Start engine. If engine does not start and clock LED flashes: Switch ignition ON. Wait at least 20 seconds. Switch ignition OFF. Repeat programming procedure. Repeat above procedure to program remaining keys. Keys can also be programmed using diagnostic equipment

Mar 08, 2010 | 2000 Ford Focus

1 Answer

Ignition switch will not come out


Is any of the original key slot left?

Mar 18, 2009 | 1989 Ford Ranger

1 Answer

Ignition switch


If the ignition is stuck in the ON position but wont trun off or to the start position the ignition will need to be removed repaired or replaced. LOCKED OUT LOST KEYS Vonfrankln@aol.com

Sep 15, 2008 | 1995 Toyota Camry

1 Answer

Lost keys & need to remove ignition switch


it is kind a hard some drilling must to be done but try to call and shop arrownd for a lock smith guy sometimes they will do a copy for a fair price without taking the ignition out

May 25, 2008 | 1987 Ford Ranger

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...