Question about 2007 Buick LaCrosse CXL
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi from uk most rear brake calipers have auto adjust mechanism and yours may be the same as on uk models whereas to compress the piston back into caliper to facilitate fitting new pads ? you have to both press and rotate piston and this sends piston back on the screw auto adjuster you will notice that piston has a couple of slots on its head ? this is there for enabling screw back having said this there is a rear caliper piston compress tool that does this job and the cheapest tool and good quality is made by draper tools and costs approx £10 in uk but can be obtained at any good auto stores and has instructions on use well worth the investment ? just one tip pistons normally screw back clockwise however! on fiats? the nearside screws anticlockwise so just observe that piston is going back when rotating c/wise if not you can fit a 3/8" drive extension and t bar to the rotator boss and using pressure ?turn piston a/clockwise hope this helps one word of advice !make sure you bleed brakes afterwards to clear out dirty fluid untill clean fluid shows this will improve brake pedal best wishes from uk
Posted on Mar 23, 2010
SOURCE: how to reset oil light
1. Turn on ignition 2. Press the option button on your DIC until ENGINE OIL MONITOR appears. 3. Press the set reset button. A brief message will be displayed. 4. Turn the ignition off, then start engine to verify the reset. Hope this helps... Please vote.
Posted on Mar 10, 2011
SOURCE: what to use to change
You need either a 14, 15, 16, or 17 mm wrench or socket. You just turn the belt tensioner to where it will loosen the belt, And then take the belt off. Do the same thing to get the belt on. It should look like either of these, DEPENDING ON WHAT MOTOR YOU HAVE.
Posted on May 17, 2011
Tips for a great answer:
Mar 19, 2017 | 2011 Buick LaCrosse CX
May 23, 2016 | Buick Cars & Trucks
Mar 07, 2015 | 2007 Buick LaCrosse CXL Sedan
Sep 03, 2012 | 2007 Buick LaCrosse CXL
Nov 13, 2011 | 2006 Buick LaCrosse
Mar 26, 2011 | 2007 Buick LaCrosse CXL Sedan
Sep 07, 2010 | 2007 Buick LaCrosse CXL Sedan
Nov 02, 2009 | 2007 Buick LaCrosse CXL Sedan
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: