Question about Hyundai Motor 2003 Elantra

1 Answer

Right axle seal leaking - Hyundai Motor 2003 Elantra

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

Can I conclude front cv shaft on the right side from your posting? If this is a yes you will have to pop the shaft out,pry the old seal out and very gently(a large socket works well) tap the new seal into place.If you are not handy I am afraid its a trip to the mechanic.Service on these is replacement only.good luck

Posted on May 07, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 86 Answers

SOURCE: I need help with Axles for 2001 Hyundai Elantra

depending on how bad the axels are. you could buy new ones. or you can buy a rebuild kit. now for the leak just 1 seal but if your gonna remove both axels i suggest buyin both side seals.

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side axle leak


front or rear? axle.
movement where
in, out, left right , up or down,. or all?
its a 3D world post directions.

btw, most seals that leak are due to bad bearings allowing the shaft
to beat the seal to bloody death, fact. (Timken.com)
only 1 exception, but is not where you are.

Jan 21, 2014 | 2003 Toyota Celica

1 Answer

Rear axle leaking at right rear wheel


DO NOT WAIT- MY DEALER SAID I HAD A SMALL LEAK IN SAME PLACE, BUT DIDN'T SAY IT WAS URGENT. SEAL BLEW OUT DRIVING ON FREEWAY, DAMAGED ONE AXLE BEFORE I COULD EXIT. $1200 REPAIR. IT WAS NOT MAKING ANY NOISE TILL IT FAILED. SOUNDED LIKE TIRE THUMPING TO ME. DEALER REPLACED BOTH LEFT AND RIGHT SIDE SEALS, RIGHT SIDE BEARING AND RIGHT SIDE AXLE.

May 23, 2012 | 2003 Mercury Grand Marquis

1 Answer

JUST HAD RIGHT FRONT WHEEL BEARING REPLACED ON MY 1998 DODGE RAM 1500 4X4 DROVE 50 MILES NOW THE AXLE SEAL IS LEAKING WHY


Can't remember if your axle is set up like the ones on a Jeep (too many cars stuck in my head) but if it is, the seal is on the inboard end of the axle and easy to forget it's there. If you don't lift the axle so it goes through the center of the seal when you put it back in, it will push the seal out and cause a leak.
If that's the case, whoever did the work needs to make it right. (carrier needs to be removed as well as the axle, to replace the seal)

May 24, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

Gear oil leaking from right rear wheel


Axle seal is leaking, but upon inspection, double check that it is ONLY the seal and not because of a bad wheel bearing or a ridge worn in the axle itself from the seal and/or bearing

Sep 02, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2005 single axle F-350


Yes you will need to pull the axle to get that seal out. You will need to pull tire open punkin or gear case there will be a C clip holding the axle inplace pull this out and very carefully slide the axle out the seal is in the axle housing

Apr 08, 2010 | 2005 Ford F 350 Super Duty

2 Answers

1994 buick roadmaster, oil leaking out of right rear axle, checked brake fluid is full, could it be differential oil leak @ end of axle??


If what you see leaking is very oily and does not evaporate, likely it is an axle seal. If there are no leaks in the brake system, that's the only thing back there that can leak. If the axle bearing is going away, it can damage the seal so make sure you look for small shiny metal flakes behind the seal when you replace it or you will be doing the job again very soon. Can't remember...that IS rear wheel drive right?

Dec 01, 2009 | 1994 Buick Roadmaster

1 Answer

I own ahuyandai 1993 has been leaking for awhile seals were replaced right boot was changed right axle was changed still leaking alittle


Your problem could be, Over-filling! No mattter how many times you changed the seals, if you over-filled the system, it sure would find some way to leak out. Also the seals' housing may be out of roundness. If you could get under the car, and used a good hand-lens to look around the seals you might be surprised to see how the seals fit around the axles.

Nov 19, 2009 | 1983 Jeep CJ7

1 Answer

I need help with Axles for 2001 Hyundai Elantra. The Left Axle rubber cover is broken, also I heard noise when the wheel moves iether left or right turn when the car is leaving or entering a parking box....


depending on how bad the axels are. you could buy new ones. or you can buy a rebuild kit. now for the leak just 1 seal but if your gonna remove both axels i suggest buyin both side seals.

Jul 22, 2009 | 2001 Hyundai Elantra

1 Answer

1999 dodge cummins 2500 front axel seals


you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

1 Answer

Rear Axel Seal Leaking, How do I pull the axel to repair?


You will need to remove the differential rear cover,drain fluid, remove wheel, brake drum, (rotor) . Unbolt center diff. pin, carefully remove (don't loose shims) push axle in remove lock keeper, then slide out axle, replace seal, put some grease on it, slide axle in reverse all to install.

May 22, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
Hyundai Motor 2003 Elantra Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...