Question about 1991 Chrysler Imperial

Open Question

Ignition light stays on when car not running

After cutting car off light around ignition swicht stays on

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What cable to cut for a kill swicht


The Safest cable to cut when installing an allarm or kill switch is the fuel pump because it doesn't hook directly to the computer like the ignition wires. It goes through a relay before going to the pump. You want to put your switch or alarm cut out relay on the wire coming from the fuel pump relay to the fuel pump.

Jan 26, 2015 | 1999 Toyota Tacoma PreRunner

1 Answer

My 2005 aveo daytime lights are staying on after car is turned off. Is this a problem with the ignition system? The key also gets very hot after driving the car for 15 minutes or more.


IT SEEMS MORE LIKE A CROSS WIRE ON YOUR DAHS BOARD THAN A IGNITION PROBLEM, CHECK YOUR DRIVING LIGHTS WIRING FIRST, CHECK FOR CRACK OR BROKEN PROTECION WIRES, RIGHT UNDER YOUR STERING WHEEL NEX TO THE KEY SWICHT FOLLOW ALL THOSE WIRES UNTIL YOU SEE THEY MEET WHIT DRIVING LIGHT ARNES AND DOBLE CHECK FOR BURN OR OPEN WIRES . HOPE YOU FIND IT.

Aug 10, 2013 | 2005 Chevrolet Aveo

1 Answer

1996 nissan altima brake lights stay on


disconnect your brake light switch ,its in brake pedal once you disconnect ,brake light off,either swicht or grounded to other wire

Jul 21, 2012 | 1996 Nissan Altima

2 Answers

2.4 liter twin cam theft lite stays on oil lite charging lite brke and cooling lites stay on car ran before if you turn on ignition the car will run for one or two seconds then stalls or quits running then...


your ignition switch could have carbon on the main contacts you should disassemble it clean it then reinstall it. the after market switches for that car are not very good. the switch is the problem causing the light to stay on. paslock is the reason your car will not run. the easiest why to fix it is- go on the net find a remote start companys one of them will have a genric diagram explaining what they have to do to get around paslock. with this diagram you can see the wire to cut and then insert the proper resister to resignal the paslock then remoce the resister reconnect the wire.

the big brain

Jan 27, 2011 | 1996 Pontiac Grand Am

2 Answers

Brake light stays on


Check the brake light switch,try pulling up on the brake pedal,see if the brake lights will go off.

Jul 11, 2010 | 2003 GMC Envoy

2 Answers

Car wont run. it starts an cut off


Does the security light flashing after it dies? Will it stay running if you keep your foot on the gas?

Mar 30, 2010 | 1991 Buick Park Avenue

1 Answer

Starter will not engage anti theft light is on it is a 2005 cobalt


I found this on a website try this

1. Put the newly cut Master key into the keyway and turn it to the ON (RUN) position. A "security" indicator
light on the dashboard will stay on for 10 minutes.
2. Within 1 minute after the indicator light goes off, turn the ignition to "OFF", then return to the ON (RUN)
position. The indicator light again will stay on for 10 minutes (Do not remove the key.)
3. Again, within 1 minute after the indicator light goes off, turn the ignition to "OFF", then return to the ON
(RUN) position. The indicator light again will stay on for 10 minutes. (Do not remove the key.)
4. When the light goes off the third time, the new key is programmed into the computer and will start
the car. Remove the key and then re-insert it into the ignition lock and start the car.
All previously stored codes will be erased. To stop the process at any time, simply remove the key and use
an existing key to start the car.

Mar 25, 2009 | 2007 Chevrolet Cobalt Coupe

1 Answer

Electricial Issues


next time it does that move the ignition kee so you pry the swicht i had that problem its ignition switch that defect the housing swicht the problem cheers pierre

Jun 27, 2008 | 2000 Chevrolet Malibu

Not finding what you are looking for?
1991 Chrysler Imperial Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...