Question about 1991 Chrysler Imperial

Open Question

Disarm light around ignition key ring - 1991 Chrysler Imperial

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bypass alarm system lost the remote 02 ford expedition


Factory alarm is Passive. Passive Anti-Theft System. It is a transponder chip in the key and a transceiver ring around the lock cylinder. If the alarm starts go off when set and not unlocked with remote or key, inserting the programmed key into the ignition and starting will disarm the system, shut off the horn and flashing lights and allow the vehicle to start.

Mar 07, 2017 | Ford Cars & Trucks

2 Answers

How do you turn off an alarm for a 2005 Saturn Ion


Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the CTD armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the BCM stores the CTD mode status in memory.
?€¢
To disarm the CTD system in arm pending mode, SECURITY indicator flashing and doors open, perform 1 of the following:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system in the armed mode:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system when activated, alarming mode.


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.

Jun 24, 2016 | 2005 Saturn ION

1 Answer

How do i disarm warning chime on 1998 GMC Sonoma


Worn out key cylinder or ignition switch. Cant tell when key is off. There is a wire which as you put in the key it makes contact as the the key pushes this metal contact up. You can unplug it. It should be a blue wire you should be able to see once you remove the covers of the colomn.

Jan 19, 2015 | 1998 GMC Sonoma

1 Answer

Starting problem


You can not by-pass, disarm, or eliminate the "Anti-theft module. Its called "HALO" and it is located at the ignition key cylinder. The plastic ring (part or anti-theft module) wraps around the key cylinder. If the key cylinder receives an impact and breaks the ring, it will not allow the vehicle to be started. Also if the module breaks or wears out, it will need to be replaced. Diagnostics will be needed to repair. If you are looking for the exact repair procedure, please write back and let me know. Good luck. P.S. if you are not familiar with Air-bags, you should just take the car to Ford. They only sell the parts and it will cost you less to go there.

Feb 11, 2014 | Cars & Trucks

1 Answer

Reset alarm


I can only suggest one thing that might work.

Disconnect the battery and leave the car overnight. In the morning put the key in the ignition and turn it to the on position and then connect the battery.

If that doesn't work you will need the services of an auto locksmith or the dealer. I hope the price you paid for the car was much reduced because of the missing keychain.

Apr 16, 2017 | 1996 Ford Escort 4 Door

1 Answer

Disarm alarm


Get in the car, shut the door, and insert key in ignition.

Turn the key to the RUN position (NOT start, but the position the key is in when the car is running. You DON'T want to start the car).
Turn key off.
Repeat this 10 times quickly (ON, OFF, ON, OFF, etc)

Many alarm systems this is at least one way to reset or over-ride the alarm.

Jan 28, 2014 | 1996 Ford Escort 4 Door

1 Answer

Replace ignition switch on a 1999 dodge caravan


Take off the plastic housing around the column. then thke off the light ring around the ignition switch. on the underside of the ignition switch there is a half round pin. turn ignition to on position, push uop on pin and pull on key at the same time. the ignition switch should just slide out. Good Lock

Oct 14, 2011 | 1999 Dodge Caravan

1 Answer

Had car starter installed now the passlock light stays on. He took the key out while the vehicle was running. They disconnected the battery and hooked back up but that did not work.


Important: Using the power door unlock switch or manually unlocking the doors does not disable the Content Theft Deterrent (CTD) armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the body control module (BCM) stores the CTD mode status in memory.
• To disarm the CTD System in arm pending mode, SECURITY indicator flashing and doors open, perform one of the following: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System in the armed mode: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System when activated, alarming mode. - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle.

Nov 04, 2009 | 2005 Chevrolet Equinox

1 Answer

Replaced the alternator, now anti theft won't disable


The ignition lock anti-theft switch (19A438) detects if the ignition key cylinder is broken or "slam pulled" during a theft. The ignition lock anti-theft switch is always monitored by the remote anti-theft personality (RAP) module. This allows the alarm system to be triggered in the case that the ignition lock anti-theft switch detects tampering of the ignition key cylinder (even in the event that the alarm is not active at the time).
Refer to the Section 501-14B for more details on the keyless entry remote transmitter (15K601).
The door open warning lamp switch (14018) communicates to the RAP module through the generic electronic module (GEM). This input to the RAP will cause the anti-theft alarm to be sounded if the anti-theft alarm was armed.
The door disarm switches are assembled into both LH and RH lock sets. The door disarm switch must be triggered before the mechanical lock unlocks. This is to prevent the anti-theft alarm from activating when it should have been disarmed.
The RAP module controls the anti-theft system and is the brains of the keyless entry system. The RAP module communicates with the GEM to request that the interior lights be turned ON/OFF with use of the keyless entry remote transmitter, and the GEM communicates to the RAP to inform when the door is opened. Refer to Section 418-00 for inter-module communication.
The RAP module has three wire connectors attached to it:
  • The antenna for the keyless entry remote transmitter.
  • 26 circuit connector (C256).
  • 22 circuit connector (C257).
In addition to the perimeter alarm that uses the door open warning lamp switch, the RAP module also uses the ignition lock anti-theft switch and the autolock/relock feature to prevent theft of the vehicle. For a full description of the autolock/relock system, refer to Section 501-14B .
The THEFT LED is found on the instrument panel between the tachometer scale and the needle pivot point. The LED is illuminated during prearming and flashes when armed or triggered.
Prearming and Arming the System
The system can be armed if:
  • The ignition is OFF.
  • The PANIC alarm is OFF.
  • All doors are closed.
There are two ways to prearm the system:
  • Press the LOCK button on the transmitter.
  • Open a door, press the power door lock button and close the door.
After 30 seconds the system will be armed and the theft indicator in the cluster will flash every two seconds.
Disarming an Untriggered System
An armed system will be disarmed with one of these valid actions:
  1. Pressing the UNLOCK button on the transmitter.
  1. Placing a key in the door and turning to UNLOCK.
  1. Turning the key to RUN or ACC.
The anti-theft alarm can be triggered by the following conditions:
  • The ignition cylinder is damaged with or without the RAP being armed.
  • A door is opened without disarming the armed RAP module.
The remote transmitter can activate a panic alarm which is similar to an anti-theft alarm, but does not deactivate the starter or cause the theft indicator to flash.
Disarming a Triggered System
If the system has been triggered, (the horn honks, the lights flash, and an external starter interrupt relay is engaged), the system can be disarmed by:
  1. Pressing the UNLOCK or PANIC button on the transmitter.
  1. Putting a key in the door and unlocking the door.
  1. Turning the ignition to RUN/ACC (Turning the key to RUN/ACC will not disarm an alarm that has been triggered by the ignition lock anti-theft switch.).

Apr 10, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
1991 Chrysler Imperial Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...