Question about Cars & Trucks

1 Answer

My honda odessy 2003 model finds difficult to select gear easily now. Sometimes on speed and I suddenly step on the breaks, to accelerate again become problem.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

Have the auto transmission fluid level checked, if the fluid has never been changed i'd do that as these are classic trans fluid problems,don't leave it to long to do as could cause a mechanical prob then your into serious problems

Posted on May 07, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: VIBRATING BRAKES ON A 2005 HONDA ODESSY

This must be a case of worn or nearly worn brake pads, happens to me all the time. As you buy new disc pads, make sure you use a 'break in' conditioning to the new pads, meaning, from speed of 30-0 slam the brakes, then cool off, then 45-0, slowly do the same if it is safe to do so, and on a clear road, if possible do a 60-0 do the same thing. Before doing these, I have to say make sure, either have your rotors checked by a mechanic if it needs to be cut to specification meaning there are no ridges/circular deep lines on the rotor surface. Good luck...

Posted on Aug 06, 2008

SOURCE: Code p0720

Still looking for some HELP! AnyBody?

Thanks

Posted on Sep 12, 2008

NorseXNW
  • 8 Answers

SOURCE: 2002 Honda Odyssey fan only works at high speed. The A/C compressor also does not come on

If the fan only works on high speed I'd suspect a bad resistor in the fan circuit. On a new car it may be called by a different name but in essence does the same thing. It steps voltage down to the fan motor in all speeds but high. I'd check that first assuming there is no obstruction interfering with fan operation in all speeds but high overcomes that obstuction. I've seen mice among other things in a fan box on many occasions. I think the A/C problem is unrelated to your fan problem. This one may be a little harder to solve. The first thing to check is Freon level. The compressor won't cycle if the freon is low to avoid damage to the compressor. Do the fans, both under the hood come on when you turn on the A/C? If so it is more than likely just a Freon issue. If not take it to your local Honda Dealer.

Posted on May 23, 2009

  • 2841 Answers

SOURCE: 92 Accord Automatic shifting

Has anyone change the transmission fluid and used anything other than Honda ATF-Z1. If so, have the fluid/filter changed in this car and use only Honda Fluid. This is the only fluid that you can use in a Honda. Even if you have used the correct fluid an fluid/filter change may help. If that is not the case then I suggest you seek out a trusted professional.

Posted on Aug 08, 2009

  • 257 Answers

SOURCE: 2003 Ford Ranger, 5 speed manual. Sometimes I

if you have a slave cylinder on it my not be working right,, if you have levers maybe a brushing wearing out cause wobble

Posted on Aug 12, 2009

Testimonial: "Thanks, I'll check it out."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Question 1. My 2003 Honda accord vibrates especially when the AC is on and its on drive or neutral gear, but it does not vibrate/shake when its in motion.


Hello,
It sounds as if your Automatic Transmission is having issues. The first thing to do is check the Automatic Transmission Fluid (ATF). This is covered in the Owner's Manual (should be in your glovebox??).

If the level is low, it will cause issues. Your ATF should be serviced every 30,000 miles.

GL,
TD

Apr 28, 2015 | 2003 Honda Accord

1 Answer

IF my car I mean honda Odessy 2003 model find it difficult to enter drive one what could be the problem


possible shifter cable binding. Happens a lot to these models when the engine and transmission mounts are worn.

Sep 12, 2014 | 2003 Honda Odyssey

1 Answer

The car is all on normal condition until I filled the gasoline to the fuel tank (over the standard value) ,I left the gas station suddenly the speed goes down then the engine stopped , I try to ignition...


You overfilled the tank and screwed up the fuel vent canister. Usually the car will not run, dies while idling, or surges if you try to drive, also if you try to fill up again you might find it difficult to fill your tank fast because the canister is not venting the tank

Oct 21, 2013 | 1986 Mitsubishi Space Wagon

1 Answer

My 2009 Hyundai Sonata quit accelerating while driving in town. The ESC and check engine light came on. I was able to turn the car off and back on and the ESC light went off and acceleration worked...


This may not be your problem but it does bring the vehicle in fail safe you may have a warranty
Group TRANSAXLE
Number 09-AT-016
Date AUGUST, 2009
Model
1999-SONATA
2001-ELANTRA, SANTA FE & XG
2003-TIBURON
2005-TUCSON
2006-AZERA
2007-ENTOURAGE

Subject
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES P0715, P0716, P0717, P0720, P0721 & P0722

An improperly functioning input speed sensor or output speed sensor may result in the following conditions:
^ "Check Engine" light on
^ Harsh P-R or P-D engagement shock
^ Transaxle in 3rd gear fail-safe
^ Diagnostic trouble codes 1. Using a GDS, check for DTCs in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.
2. From the GDS, select:
^ Vehicle
^ "Auto Transaxle" menu
^ "Current Data"
^ "Input speed sensor" and "output speed sensor". Drive the vehicle and monitor the input and output speed sensors. If the sensors show:
^ Continuous output, the wiring currently has no open/shorts. Go to Step 6.
^ No output, go to Step 3
3. Check the wiring harness visually for an open circuit or short circuit to ground. Check for a pinched harness at the PCM/TCM attachment bolts.
4. Disconnect the connectors at the input and output speed sensor and PCM/TCM. Check for bent pins or pins not fully inserted into the connector.
5. If a harness open/short is found, repair or replace the ECM control harness between the PCM/TCM and transaxle and go to Step 8. If not, go to Step 6.

Aug 22, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

My car sometimes turnes off suddenly during


I had the same problem on my 1999 Honda Accord 4 cyl. It was the ignition switch. I received a letter from Honda regarding a recall on the ignition switch and had it replaced. 3 years after replacement it would turn off again & this time I purchased part from eBaby & replaced it myself. It hasn’t stalled since.

Apr 18, 2010 | 1999 Honda Accord

1 Answer

Honda accord 2003 car disengage the automatic gear at zero speed


Is there an engine light?

Assuming there are no engine codes set

1. Do the idle learn procedure
2. Check fuel pressure (380 to 430 KPa)
3. Check idle speed (740 to 840RPM in P or N)
4. Check the brake pedal position switch (requires a scan tool)

If these all check out, look for air intake leaks, faulty harness and sensor connections.

As you can see, these steps should probably be done at a dealer.

May 21, 2009 | 2003 Honda Accord

1 Answer

Intermittent power loss after accelerating hard


hi what is your car have no codes come up if not do a fault reading see if it has stored any as tps [throttle position sensor ] map sensors and airflow sensors will cause this problem as will a few others it can be expensive guessing yates210456

Oct 17, 2008 | 2003 Nissan Se R

1 Answer

Difficulty putting car into gear


Hi,sounds like a wear out clutch ,

Aug 06, 2008 | 2003 Honda CR-V

2 Answers

Shifting problem


that means you should get a stick lubricant it would shift fine.

Jul 05, 2008 | 2003 Honda Pilot

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...