Question about 2010 Chevrolet Captiva 2.0D

Open Question

Keeps searching for usb connection and tries connect when nothing is connect to the usb

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you connect the distributor to the std dictator, looking for a diagram


Not putting a brand and model name, here, will keep everyone from giving the right answer. I can't even look in the manuals I have. Sorry.

Nov 22, 2014 | Cars & Trucks

1 Answer

Chevy express 1500 20amp eng 1fuse keeps blowing ?why


what does it drive - search for some shortcut/ burnt device, wear on cable insulation through 20 amps do not blow without reason. Maybe badly connected engine mass connection - check battery connections to start with

Apr 18, 2014 | Cars & Trucks

2 Answers

Will not start, battery is new, it just clicks and nothing. turn it off, try again and nothing, try again and it starts


Try cleaning and tightening well the battery connections along with the battery wires to the solenoid and starter motor.

Bad connections and low voltage of 12 volts can result in this anomaly.

Jun 12, 2017 | 1997 Lexus ES 300

2 Answers

91 honda acura integra


The fan that keeps runnuing will be the fan for the radiator, Some cars allow the fan to keep running after shutting down the engine to cool the water in the radiator. They run for a short time 5 -10 minutes or less but will cut off. If it keeps running the timer controller or temp sensor is faulty. Have an auto elec check it out.

Feb 10, 2013 | Cars & Trucks

1 Answer

After sitting for about 6-8 hours car is hard to start. I turn the ignition key and nothing but if I keep trying after about 20 tries it cranks and runs fine. What may be the problem?


You have a bad electrical connection. Try cleaning battery connections. If this doesn't work, clean the starter connection at the starter. Also make sure your starter cable & ground cables are in good condition. Give your cables & connections the finger test . After trying to start for a while, touch the wires & connections with your finger.If you find a hot spot this is where the connection problem is. Good luck!

Dec 18, 2009 | 1997 Dodge Intrepid

1 Answer

Turn the key and nothing


Clean the terminal connections on the battery. Also clean ground to frame connection

Oct 05, 2009 | 2003 BMW 325

2 Answers

Toyota Paseo takes many tries to start


the brake should have nothing to do with it. fuel filter may be clogged.check air filter also.

Jul 01, 2009 | 1992 Toyota Paseo

1 Answer

Neon pcm


I would check your electrical connections. Check the battery posts...also check all the wire connections that lead off the negative side...(follow them and make sure that any that are connected to the frame of the car are clean and shiny . If they are not...then expect a dirty connection ...take them apart, wire brush all contact points and then re-assemble.)Most problems that are electrical are just bad connections.(mostly on the negative or ground side)
Keep me posted on your findings and ill help some more
Good luck!
8-)

Jun 07, 2009 | 2000 Dodge Neon

Not finding what you are looking for?
2010 Chevrolet Captiva 2.0D Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...