Question about 1986 Honda Accord

Open Question

Where location of pcv valve on honda accord 1986 carb.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: location of a pcv valve on a 2005 honda accord

The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.

Posted on Aug 22, 2009

Ad
philschneide
  • 448 Answers

SOURCE: where is the pcv valve located on a 1999 honda

Under hood, center, upper engine area, top of engine, MOUNTED IN THE VALVE COVER (probably has a rubber hose connected to it, coming from a place further back toward the firewall) It usually is removed by simply pressuring it upward out of the rubber gromet that it resides in.
Hope this lets you find it.

Posted on Oct 27, 2009

Testimonial: "u guys are great! I'll be back with more stuff. hopefully one day I can be among you answering these questions! thanks a million!"

c17hydro
  • 2984 Answers

SOURCE: Where is the pcv valve located on a 1989 honda

379f3ea.gif
It is the silver piece being held by the pliers.


Removal & Installation To remove the valve, disconnect the hose and pull the valve from the grommet. Install the new valve and connect the hose. Attempting to clean the valve is not recommended; always replace it. Install the new valve firmly into the grommet. Connect and secure the hose.
Remove the PCV valve from the valve cover or intake manifold. Remove the hose from the valve. Take note of which end of the valve was in the manifold. This one-way valve must be reinstalled correctly or it will not function properly.

Posted on Dec 01, 2009

localwonder
  • 6784 Answers

SOURCE: were is pcv valve located on 1989 honda accord lx

You PCV will be located on the center, rear engine area. It is just below the intake manifold, between the block and intake manifold. The valve is housed in the vacuum hose that runs halfway into the engine.

Posted on Jan 02, 2010

  • 7 Answers

SOURCE: pcv valve location

more than likely IN the rocker cover.

Posted on Mar 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is pcv valve located on 1989 honda accord lxi


Locate the air box on the top center of the engine towards the back. The PCV valve is located on the rear, underside of the air box. Although on some Accord models, a small air box bracket may be present, which will block view and access to the PCV valve plugged into the intake manifold. If by chance the bracket is there, then remove the retaining nuts, holding it to the air box side with the ratchet and a socket. Reach onto the intake manifold with a pair of needle nose pliers, and gently pull the PCV hose and valve out of the grommet of the intake manifold. Hope this helps!!!

Oct 20, 2011 | 1989 Honda Accord 4 Door

1 Answer

Need to locate PCV valve on 4cyl. Honda Accord


It should be on the valve cover. It should b "L" shaped and inserted into a rubber grommit and connected at the top is a vacuum line.

Apr 26, 2010 | 2003 Honda Accord

1 Answer

Were is pcv valve located on 1989 honda accord lx 4 cylinder


You PCV will be located on the center, rear engine area. It is just below the intake manifold, between the block and intake manifold. The valve is housed in the vacuum hose that runs halfway into the engine.

Jan 02, 2010 | 1989 Honda Accord 4 Door

1 Answer

Pcv valve location


more than likely IN the rocker cover.

Dec 29, 2009 | 2003 Honda Accord

1 Answer

Where is the pcv valve located on a 1989 honda accord dx?


379f3ea.gif
It is the silver piece being held by the pliers.


Removal & Installation To remove the valve, disconnect the hose and pull the valve from the grommet. Install the new valve and connect the hose. Attempting to clean the valve is not recommended; always replace it. Install the new valve firmly into the grommet. Connect and secure the hose.
Remove the PCV valve from the valve cover or intake manifold. Remove the hose from the valve. Take note of which end of the valve was in the manifold. This one-way valve must be reinstalled correctly or it will not function properly.

Dec 01, 2009 | 1989 Honda Accord 4 Door

1 Answer

Where is the pcv valve located on a 88 honda accord Lxi, fuel injected? i'm trying to replace it and can't seem to locate.


Follow the large (3/8 in) PCV vacuum hose from the front of the intake manifold plenum (lg silver box with label PGM-FI ). It turns toward the pass. side then down between intake maifold tubes/runners to the PCV valve.

Oct 04, 2009 | 1988 Honda Accord 4 Door

1 Answer

Looking for locatio of PCV valve on 2001 Accord EX 3.0?


it should be located in the rear valve couver pushed into a rubber gromet with a hose running from it to the intake tube going to air box if not there then in the front valve couver same deal with a gromet and a hose running to the intake tube going to the air box. thats were 90 percent of ur pcv valves are located on most car trucks and suv's. im not real fimilyer with the 3.0 honda moter but i hope this helps

Aug 01, 2009 | 1992 Honda Accord

1 Answer

Tune up whats needed


at 100,000 miles u need plugs, the rest is as required, no need to replace plug wires unless there is a problem like a missfire, clean the PCV with carb spray

Jun 20, 2009 | 2007 Honda Accord Sedan

2 Answers

Location of a pcv valve on a 2005 honda accord


The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.

Apr 08, 2009 | 2005 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...